Tap Sockets

[Indy125]

Hello Everyone,

Are tap sockets worth it, or use them much? Never knew these existed, I would always see if any of my regular sockets fit and they don't. These would be perfect. Any recommendations besides Lisle? Thanks as always!

https://www.amazon.com/gp/product/B0002SRFOE/?tag=atomicindus08-20

 

[DFB]

Though I have often seen them I never felt the need to have them but I'm sure they have a place in some peoples tool box. Never know when some odd situation may arise!

A ratcheting tap handle was one my best cutting tool investments.

 

[Mastermind]

I use mine 9 times outta ten. Allows some combos that shouldn't be possible. Like using a universal and extension etc.

 

[bob15]

Don't use them much, but they are handy to have.

 

[ihateminimumwage]

They're all I use now. them and an old 1/4" Craftsman T handle with a 3/8" adapter if I need it. I don't think I even own a regular tap handle anymore.

 

[JohnDeere1]

I just use 4pt and 8pt sockets

 

[454ragtop]

I just use 4pt and 8pt sockets

Sometimes 12 point too. I usually use a tap wrench, cause I have lots of top quality ones, but sometimes a socket comes in handy.

 

[Wamsutta]

12 point sockets work just as good, but you didn't hear it from me.

 

[LXCam]

I use the living hell out of mine, they're worth every damn dime.

 

[kblee27]

I used once to tap a damage hole, that was blocked, by attaching it to an extension.

 

[Tallpilot]

I prefer my ratcheting tap handle but these are very helpful when access is restricted. They work for extractors too; not just taps.

 

[ChevyEFI]

since I already have ratchets that drive these, I am glad I bought them, and don't feel like I am missing out on a ratcheting tap wrench. Just a simple under-car chasing of trans. pan bolt holes with a tap is a pleasure compared to spinning the tap wrenches that come with basic tap sets.

I added them on my Amazon and when they dropped in price, I bought the 8pc. for $30 or so.

 

[Heavy Metal Doctor]

Are tap sockets worth it, or use them much? Never knew these existed, I would always see if any of my regular sockets fit and they don't. These would be perfect. Any recommendations besides Lisle? Thanks as always!

They are worth it if you deal with threaded holes / cleaning out damaged threads / even tapping new threads if you are careful not to torque / twist out of alignment. The normal tap handles that come in a tap / die set will not always access holes needing repair, so these sockets can save you a lot of trouble.

 

[plinker]

I use them quite a bit, especially larger sizes and use a "T" handle.
8pt sockets work too, but these hold the tap in place.

 

[vssjim]

I have both small and large sets by Lisle and have used them a lot because some taps are strange sizes that regular sockets just wont fit.

 

[electronFarmer]

While this is not for confined spaces, I keep an old "brace and bit" driver on hand for driving taps. Forward and reverse, works just fine because those old drill bits had square (but tapered) shanks.

 

[PelicanPines]

I have those sockets... I tap stuff a few times a week... they are very useful for getting in spots to repair threads.

I tend to virgin tap via my drill press to keep it straight... and no... I don't turn the drill press on.. just used to keep it straight.

 

[Jazz1]

Never seen them before but sure could have used them many times. I checked and they also fit metric taps,,,that in itself in friggin' amazing!

 

[sberry]

The price is right, not a deal breaker.

 

[matt01073]

Liisle ones are great , I think blue point ones are made by lisle . I use mine at least several times a week , you will find once you have them the uses will become apparent .

 

[Olafur]

They are great, problem is many taps don't fit them.

 

[matt01073]

IM not sure if tehy make different sets but rhe set I have has 1/4 3/8 and 1/2 drive sockets and Im not sure I ever had a tap that didnt fit .

 

[senlow]

I use mine quite often. As far as I know, Lisle is the only manufacturer.