Terminal assortment kit

[chilly13]

Looking for an affordable terminal pin assortment kit to keep on hand. Amazon sells a big kit for like 20 bucks but I'm skeptical of the amazon stuff like these terminal pins, fuses, and other electrical things. If you have used the amazon cheapo kits and have a good experience, ill give em a try. Any other options out there that don' break the bank would be much appreciated. Amazon says they're coated copper terminal pins. I have literally no expereince with this so thanks in advance!

 

[Snapped-off]

What style pins? I use Mouser Electronics occasionally.

I prefer to stick to name brand stuff over the cheapo amazon megapacks.

 

[chilly13]

New to this so when u say style of pins do u mean the numbers on the pin itself? In one place it says P02 and in another it say 21 I think.

 

[Firebrick43]

WHAT kind of terminals, Molex, weather/metripack, Deutsch, packard, DB, Cannon?????

 

[chilly13]

Oh jeez. I don't have a clue, looks like ill be looking into all of those and figure out what your talking about. My fans wont kick on in the car and I found the wire connector, one of the wires came out. I depinned it and cant uncrimp it to get it back in there. Had no idea there were so many different types

 

[Firebrick43]

Oh jeez. I don't have a clue, looks like ill be looking into all of those and figure out what your talking about. My fans wont kick on in the car and I found the wire connector, one of the wires came out. I depinned it and cant uncrimp it to get it back in there. Had no idea there were so many different types

There are 1000's but maybe only 2 dozen that are popular in cars.

Take a picture of the connector and list what vehicle it is

 

[chilly13]

2007 Pontiac g6 3.5l v6. There was also purple "covers" assumming to keep them in place. I already removed them. Let me know if you need a more specific photo and Ill try to get it for you. Thanks!

 

[Firebrick43]

so that is metripack connector. There should be a part number under the delphi on the connector. There are multiple sizes. What does it plug into, its not the fan as its just a 2 pin connector not 3

 

[chilly13]

I took one of the pins out. Im having a heck of a time reading this lol PAS-GB20 GF10....?

 

[Firebrick43]

That is the plastic code, is there an 8 digit number on the other side, maybe starting with 120 or 153.

Or better yet what does it plug into??? and i can look it up on the schematics

 

[chilly13]

I think its PA6 after looking online

 

[Firebrick43]

PA6 is just the plastic code that its made out of. polyamide or nylon 6. Its completely immaterial to what you need.

What component does the connector plug into?

 

[chilly13]

So neither of the connectors have any other large numbers on it. While I can't be certain tonight, I thought it plugged into my fans because they wont turn on and its right above them. I have no lights on the dash or anything, not sure what else it could be if it isnt.

 

[Firebrick43]

So that is for the hood closed switch, for the alarm system.

https://www.waytekwire.com/catalog/connectors/aptiv-gt150-connectors/aptiv-15366021-gt-150-series-1-way-cable-seal

https://www.waytekwire.com/product/aptiv-12191818-gt-150-series-22-20-ga

https://www.waytekwire.com/product/sargent-3306mpct-crimper-for-gt-150-gt

 

[Firebrick43]

I would look at the fan relays 28 and 29 on the power distribution block

 

[chilly13]

So that is for the hood closed switch, for the alarm system.

https://www.waytekwire.com/catalog/connectors/aptiv-gt150-connectors/aptiv-15366021-gt-150-series-1-way-cable-seal

https://www.waytekwire.com/product/aptiv-12191818-gt-150-series-22-20-ga

https://www.waytekwire.com/product/sargent-3306mpct-crimper-for-gt-150-gt

dang! Thanks a ton! Well, that doesn't solve my fan problem, but ill definitely get this repaired. Thanks again Fire!

 

[chilly13]

I would look at the fan relays 28 and 29 on the power distribution block

Thanks man!

 

[Chuckster in NJ]

I highly suggest visiting: www.g6ownersclub.com for some helpful advice.…….. Search the problems and solutions section or do a "help" post.

 

[Dodgeboy2020]

One other possible solution is that they often have those connectors as 'pigtails' from either the dealer or aftermarket such as Napa. They consist of the plug and pins along with 6 or 10" of wire to splice into the existing wire harness. Sometimes that's easier and quicker than trying to get the right pins and proper crimping tools. I know this goes agains GJ thinking but sometimes its just more practical for a one time repair.

 

[chilly13]

I thought about that too! I have it fixed now thanks to firebrick but im still at a loss on the fans. think im going to make a new post so it will get some attention. I need some help lol