The Green Snap-on Tools ****

[JohnnyP636]

Just today traded my 9 year old red classic 78 for this nice new classic 96. I have a few green tools but had usually just grabbed whatever he had at the time. Now I think in the future I will have to try to get mostly green. Definitely want one of those cordless ratchets. https://scontent-b-dfw.**.fbcdn.net/hphotos-frc3/1461227_640209396024995_1718303488_n.jpg

Do you mind posting the part number for that box? Id like to know the code for that color combination

 

[rhuff86]

I don't believe there is a separate part number for it. It was a flat black classic 96. The trim is a Promo thing going on right now. My driver was unsure weather or not the trim would be made available later or not. Before this one he had an orange box with black where mine is green. I am hoping on one had it stays as a promo thing, but on the other hand if I later get a side or top for this box I would like to dress it to match.
KRA 2423POT is the number on the back of the box.

 

[rhuff86]

Ok here are the part numbers for the trim, I looked back at my ticket. KABG2423PJJ, KACG24RCPJJ, KADF50X5PJJ, KADG2423PJJ.

 

[shockwave]

Re: The Green Tools ****

My first actual hard-handle ratchet... All my others I've just made! Snap-On guy swapped the head on my new FCF72 onto a hard-handle flex, and for the same money!

Sent from my iPhone using Tapatalk

Very nice I did that with one of my ratchets a couple of weeks ago use it all the time now

 

[schmelpboy]

 

[Coolguy83]

Custom made ?

 

[Applesauce]

Very nice I did that with one of my ratchets a couple of weeks ago use it all the time now

Funny thing is, while I have VERY little time on this FCF72 with the factory hard handle, I like all my Fuller Canada handles just as well. I don't think I'd have paid extra for it. (Also, as for the custom-made handles, the handle end is heavier and more solid feeling. I like that.)

Custom made ?

Given that it says "T8" on it... I'm going to guess yes.

 

[schmelpboy]

Custom made ?

Yep...I make tons of things that Snappy should be marketing...

 

[JohnnyP636]

Few more things arrived, got some replacement hard handles, a hard handle ratcheting screw driver with long shaft, and a large pair of display pliers...I was actually surprised that is made of aluminum, I thought it was going to be all plastic...

 

[mds47588]

Those giant pliers would go great with the giant ratchet!

 

[JohnnyP636]

Those giant pliers would go great with the giant ratchet!

Ive been watching some auctions on the 4ft tall ratchet, problem is the one seller wants $200 to ship one to Canada. I know its big but I ship stuff all the time and thats a rip off...If I come across a better deal Id buy one

 

[jes_si]

Hey guys a little help please, Thanks to this thread Im in love with the green snap on I want to start buying but Im having truble finding online. can some one please provide me with the part # for the dual 80 3/8 ratchet with a green hard handle and soft. thanks in advance

 

[just a noob]

fh936-12g

 

[chevydyl]

That part number isnt for a dual 80. Thats a 36tooth ratchet. The part number has the number of teeth in it

 

[Sebastien]

If you want green Snap On, try putting a G at the end of any part number, or if the part number ends with an R replace it by a G. Sometimes it works.

 

[zoso]

Re: The Green Tools ****

A few new green **** items and a red lower unit screwdriver cheap trip to the truck!


Sent from my iPhone using Tapatalk - now Free

Do you happen to have a part number for the lower unit screwdriver?

 

[Spudland_Dave]

Do you mind posting the part number for that box? Id like to know the code for that color combination

That's a really sharp box color combo...I wish they sold a trim kit to do up a KRL like that!

 

[Chris83]

That part number isnt for a dual 80. Thats a 36tooth ratchet. The part number has the number of teeth in it

The part number posted is just for the replacement handle not the ratchet itself.

 

[1upmoto]

 

[jes_si]

Ok Thanks guys, Ill try putting the G at the end

This has turned into my favorite thread on the site

 

[amlv20]

Ok Thanks guys, Ill try putting the G at the end

This has turned into my favorite thread on the site

Run, run now while you can.save your wallet and bank account.
Trust me....

 

[jes_si]

Run, run now while you can.save your wallet and bank account.
Trust me....

I cant Im hooked and I havent even bought any green goodness

 

[Coolguy83]

Does anybody now when green snap on cordless bare tools are a available ?

My dealer has no clue.

 

[JoeR]

picked these up off the truck the other day, he ordered me a FHD80 since he didnt have any in stock, ill have to take pictures of the rest of my snap on green stuff

 

[mds47588]

Run, run now while you can.save your wallet and bank account.
Trust me....

Too late for this poster.

But they do look purty though... What's worse is that I should be able to post yet another green addition Wednesday.

 

[chevydyl]

Haha oh yeah my bad I thought you were responding to the guy that wanted the part number for the 3/8 dual 80

 

[QuadCamBastard]

Re: The Green Tools ****

Sent from my DROID RAZR using Tapatalk 2

 

[chevydyl]

Ilove the creeper seat cept the drawer always slides open. This model isnt the same as the one in the picture from SO website my uncle has the older model in red and the drawer almost feels like it locks closed....

 

[MattPersman]

I am thinking about ordering that creeper seat any more feed back except the drawer coming open a lot I don't use a seat a lot but at times need one, my old summit racing one is a foldable unit which I like but the plywood seat is cracked so its on borrowed time

 

[daddy2coull]

I have the same seat in red. I rarely use it, but from memory the drawer does drift open. But not enough so it bothers me.

 

[chevydyl]

I love my green creeper seat....I just roll around with caution. Or I move it gently so it dont drift open. Its one of those essential shop items

 

[JoeR]

i havent used the creeper seat a ton yet but if the drawer slides out and bothers me, i was thinking of cutting a small slit so that the drawer drops into it and locks in

 

[mds47588]

Didn't get my screwdrivers....maybe next week???

But I had to get...something...to post an update to this thread, so I snagged these. Also, did get to see the giant pliers today and the driver is giving them away as a raffle with a chance to win per talon grip plier purchase.

(dunno why photobucket didn't make the image smaller)

 

[mds47588]

Update: When the Snap On driver shows back up next Wed, I'm gonna swap him this single piece for a four piece set of pliers...complete with the handy-dandy storage tray in green of course. Lastly, still keep my ticket for the giant pliers also.

 

[Bhfear]

Got in some bid war over some homemade green tire tools.. o well it happens to the best of us. also ordered this light threw my dealer to replace my older style blue one.

 

[Bhfear]

On that above creeper seat I bought one just like it from napa.. same frame same pad (except it was blue) I hated it so much that I gave it away. I was way too top heavy on it and it kept wanting to flip over on my self... so I went back to my old office chair... but thinking about getting one of the tail bone seats!

 

[chevydyl]

Huh ive never had a problem with tipping. Maybe thats the difference snap ons seat is that the weight distribution is better layed out....

 

[Bhfear]

Huh ive never had a problem with tipping. Maybe thats the difference snap ons seat is that the weight distribution is better layed out....

No its the exact same seat maybe it was just user error.

Sent from my SCH-R530U using Tapatalk

 

[onetwilliams]

Well this little guy showed up in the mail today... does anyone have any of the 3 bigger brothers to this guy that they would be willing to part with? Or the whole set in green? Thanks pm on gj pr text Trevor 321 482 5360

 

[GoodwinFord]

Just got this today now gotta figure what to put it on

Sent from my iPhone using Tapatalk