The Green Snap-on Tools ****

[zkling]

Snap on Quick Cutter, a hand holder for recip saw blades. Other is an interchangeable shank screwdriver set.

 

[RobertMo1988]

Green quick cutter is hs50g, if you can find them. The other is a green Handled sddd42, but I replaced the handled with a green one. They are originally and most of them are black handled. Pretty sure they didn't make green ones

 

[fabiannz]

Green quick cutter is hs50g, if you can find them. The other is a green Handled sddd42, but I replaced the handled with a green one. They are originally and most of them are black handled. Pretty sure they didn't make green ones

in the picture with the pliers, the green handled long reach pliers with bent nose look the same as snap on 411BCP but green. are they from snapon and what is the part number, if then who makes them i must have a set, thanks very much Fabian

 

[mperry985]

Re: The Green Tools ****

Thanks for the info

 

[littleponderosa]

1st green snap on. Damn things are almost to handsome to get greasy. Thats gonna happen anyway. Oh Yeah

 

[HICKS]

1st green snap on. Damn things are almost to handsome to get greasy. Thats gonna happen anyway. Oh Yeah

Those were my first green snap on too, I absolutely love them!

 

[90zcar]

Those were my first green snap on too, I absolutely love them!

X3! Actually my first snap on purchase. I say purchase because I had other snap on stuff that I either aquired or was given as a gift before that. None green tho!


Sent from my iPhone using Tapatalk

 

[Spudland_Dave]

X3! Actually my first snap on purchase. I say purchase because I had other snap on stuff that I either aquired or was given as a gift before that. None green tho!

Good first item to get right there, IMHO those picks set the standard by which all other pick sets are judged.

 

[jeffmoss26]

its not a real one but it is one i refurbished (used a usa handle)
and i found the pouch for a reasonable price with 3 out of the 4 blades
i made 2 hard handle 5 in 1's as well ( replacement handles)
a reversible hard handle stubby (green stubby hard handle usa)
i bought long soft grip picks, and a set of nos hard handle green picks and made
long hard handle green picks,
i also made a set of longer stubbies (see screwdriver pic)

I've been busy lately LOL

in the works
I'm going to buy a long 1/2'' drive breaker bar and put a green hard handle on it soon.
and rebuild two LSF720's and put green hard handles on them.
and I'm going to try to make long torx, and long screwdrivers if i can find some clean donor handles. (if any one has any! lmk)
i also would like to fill a second minipakg index box i have (dreams)

Awesome!!

 

[redbarron57]

Gonna post a [ic

 

[Strouty]

I found these, kind of feel bad about using them, but that is half the fun. I also have the newer striking cap ones in green, but since I knew these existed, well you guys know.

 

[dlfiene]

I found these, kind of feel bad about using them, but that is half the fun. I also have the newer striking cap ones in green, but since I knew these existed, well you guys know.

Where did you find these at?

 

[Strouty]

Re: The Green Tools ****

Ebay, I stumbled on them, I paid under retail but not by much. I figured they would be nice to have, maybe they will mate with the striking cap ones and I will have baby pry bars.

 

[schmelpboy]

My driver still has half a dozen of the smallest prybars in green. Of course, he wants the current retail price for them.

 

[HzEmall]

So my OCD had me hunt down a green vinyl for my snap on stool to go with my green box lol

 

[90zcar]

Re: The Green Tools ****

Don't mean to get this problem to go to your head but I just have to.
.......
.............................
IT DOESNT SAY SNAP ON!!!!

Oh **** now what!!
Just messing with you. Looks good


Sent from my iPhone using Tapatalk

 

[HzEmall]

I know......

 

[Strouty]

I like it!

 

[Tanro]

Converting over to green. First purchases.

16/24/32oz DB Ball peins. Can't wait to get them got 3 for the price of 2 retail.

Never really payed attention to colors on the truck, so I have mostly red stuff. Thank goodness I am patient enough to wait on good deals. Hopefully once I sell off my old stuff I will be cost neutral.

 

[Strouty]

Just so you know the 40 oz should still be available from snap on directly.

 

[Tanro]

Just so you know the 40 oz should still be available from snap on directly.

Thanks, not sure how much use a 40oz hammer would be when I have a 36. Snappy rep said he could get all 4, but he wouldn't sell them this cheap. He quoted about 30% over what I payed. And that was he "deal" not list.

He must have some NOS hidden somewhere. I find a lot of old style soft handles and a lot of discontinued hard handle stuff on his truck. Wish I had the cash to buy it and stick it on ebay.

 

[Strouty]

As far as I know the 32 and the 40 are still available from snap on directly. The 16 and 24 are the hard ones to get. The guys on ebay are marking up all of them. I paid over retail on my 16 and 24, but my 32 was a great deal and the 40 was at retail. I am ok with paying a little extra so I don't have to look at a bunch of red hammers.

 

[shockwave]

The 16,24,32 and 40 are made off and on they also have the soft face ones in green in all 4 sizes aswell I will have to dig up some pictures I have a total of 8 green snap ones and 2 Matco

Here is an older pic before I cleaned them up a bit

 

[Strouty]

The 16,24,32 and 40 are made off and on they also have the soft face ones in green in all 4 sizes aswell I will have to dig up some pictures I have a total of 8 green snap ones and 2 Matco

Last I checked they only have two of the soft face green right now. I know that they move production around, it is a shame that they do it that way. My driver would like them to always have green, I would buy a lot more from him.

 

[shockwave]

I just wish they would make the 8oz in green aswell end up using it alot

 

[Strouty]

I just wish they would make the 8oz in green aswell end up using it alot

I know, I am going to have to buy it in red.

 

[JoeR]

ive had the drill for a few months, put a piece of clear bra on it to minimize the scratches and also swapped the chuck to a keyless one. just got the impact over the weekend off craigslist for $150 brand new never used

 

[xurusaibobx]

ive had the drill for a few months, put a piece of clear bra on it to minimize the scratches and also swapped the chuck to a keyless one. just got the impact over the weekend off craigslist for $150 brand new never used

you scored on that impact!! i have both the 1/2 n 3/8. the 3/8 is a LOUD raspy gun! if you work in a shop your techs around you will hate you! i know

 

[5ferraris]

N ice I have the classic hard handle ratchet set in green, will show later...

 

[Strouty]

24 and 32 oz, now if I can just find the rest of them.

 

[Strouty]

I promise that I will not buy anymore green tools this month.

This was a partial set, but the driver is getting the rest of it for me, so I can't really complain.

 

[Strouty]

Technically, it is a new month. I bought this screwdriver (new) with a set of micro instinct screwdrivers and torx for $130 shipped. They were all new, but the other tools were red and orange. Lucky for me, my driver said he will swap me even for the green ones! I think overall it was a good deal, but I really needed another ratcheting driver like I need another hole in my head.

 

[Tanro]

Still waiting on my hose pick...

Anyways, anyone found a plastidip color that matches SO Green? I want to dip my stanley/proto hammers to match.

 

[Pinkpaul]

Here is my green 1/4 " General Service set aside my orange 3/8" set.
The Colors of the boxes are not original s.o. Colors cause in Germany i couldn´t get some original powder for coating......
i also have a 1/2" set the same way in red.
Join the pics
best regards

 

[Strouty]

Here is my green 1/4 " General Service set aside my orange 3/8" set.
The Colors of the boxes are not original s.o. Colors cause in Germany i couldn´t get some original powder for coating......
i also have a 1/2" set the same way in red.
Join the pics
best regards

That would bring my OCD to a new level, color coded sizes. I am going to think about that for a while.

 

[Pinkpaul]

Hey that is exactly why I colored this way. My screwdrivers have the same code green orange red black from small to big, my set of prybars have this color code also the next days I'll show you more.

 

[Pinkpaul]

Here, is also my red 1/2" set join it

 

[jeffmoss26]

Love it!

 

[Pinkpaul]

Love it!

Thanx for compliment I really love it too it´s always the question wich one to use this ore the smaller orange set
Always a hard to deceide lol

 

[Waggoner72]

Here is my green 1/4 " General Service set aside my orange 3/8" set.

The Colors of the boxes are not original s.o. Colors cause in Germany i couldn´t get some original powder for coating......

i also have a 1/2" set the same way in red.

Join the pics

best regards

Dang that is sweet! I love that. What's the model number on the orange box?
I recently bought a kra25 to redo in green. How did you get the chrome handle that clean or how did you find a replacement?

Edit: just saw pic with Inside, man that's slick! Still curious about the chrome handle as mine is a bit rusted up.