The Green Snap-on Tools ****

[miguelvldz]

Re: The Green Tools ****



I know these are not snap on. But for the price and quality and of course the color green! I had to pick these up. I paid 15 dollars for these three. I can't believe Walmart sells these cheaper than amazon and the MDS store.


Sent from my iPhone using Tapatalk

 

[Tripn88]

If been putting off getting screwdrivers for years. I finally made up my mind and the snapon truck had these or the old style blue hard handles. Seemed like an obvious choice. Also my new fc72 I finally got. 3/8 drive in a 1/4 body. I like it better than the stubby.



Miguelvldz I need those oil filter pliers. Going to check my Wal-Mart out for sure!

 

[miguelvldz]

If been putting off getting screwdrivers for years. I finally made up my mind and the snapon truck had these or the old style blue hard handles. Seemed like an obvious choice. Also my new fc72 I finally got. 3/8 drive in a 1/4 body. I like it better than the stubby.



Miguelvldz I need those oil filter pliers. Going to check my Wal-Mart out for sure!

They are beast! Keep in mind they don't carry them at all Walmart's is look online before heading out


Sent from my iPhone using Tapatalk

 

[Boss302man]

Re: The Green Tools ****

I know these are not snap on. But for the price and quality and of course the color green! I had to pick these up. I paid 15 dollars for these three. I can't believe Walmart sells these cheaper than amazon and the MDS store.


Sent from my iPhone using Tapatalk

I don't think my Wal-Mart carries any oem tools. Where do you live? All those prices seem really good.

Sent from my SM-G920V using Tapatalk

 

[miguelvldz]

Re: The Green Tools ****

I don't think my Wal-Mart carries any oem tools. Where do you live? All those prices seem really good.

Sent from my SM-G920V using Tapatalk

I live in California. This store I went to was in Merced. I also found them in a Walmart in LA.


Sent from my iPhone using Tapatalk

 

[SnapOnFreak]

Wow thats super cheap! if only Canada had great prices like that....

I searched online all over the place and I couldn't find anything. I'm heading to the states in NY tomorrow hopefully they have some at Walmart near the border. If theres any available ill buy double and sell em on eBay for those who can't find them.

 

[miguelvldz]

Wow thats super cheap! if only Canada had great prices like that....



I searched online all over the place and I couldn't find anything. I'm heading to the states in NY tomorrow hopefully they have some at Walmart near the border. If theres any available ill buy double and sell em on eBay for those who can't find them.

Good thinking lol here's tip to help you find them.. Go to Walmart.com or on the app. Search this part number.
then scroll down to "store availability"

Then it will search the nearest store that has all these OEM TOOLS in stock... this worked for me. Hope this helps your search!


Sent from my iPhone using Tapatalk

 

[miguelvldz]

Good thinking lol here's tip to help you find them.. Go to Walmart.com or on the app. Search this part number.
then scroll down to "store availability"

Then it will search the nearest store that has all these OEM TOOLS in stock... this worked for me. Hope this helps your search!


Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

 

[SnapOnFreak]

Thanks for the info! I looked into it and unfortunately i can't find the green oil filter pliers or the long nose. I just came came back from the states and the walmart literally had nothing for tools.... I mean they did have a few screwdrivers and wrenches but thats it. so I decided to leave and go back home and then i saw a shop called auto zone across the street. So I went to that store before heading back home and sure enough they had a full shelf of green goodies.... Down part of all of this, they didn't carry the pliers anymore.

I guess im out of luck finding these things

 

[04chase]

Re: The Green Tools ****

Have not seen these yet (3 row for short mid and deep sockets) , glad i waited and didnt buy the green hansen copies. Hoping for 1/4" and 1/2" next. Part numbers for you vultures!!!

Sent from my SM-G930T using Tapatalk

 

[orangeastre]

After searching for years for these, I just ordered a Westling Machine starter kit. Now of course I cannot live with out these....ugh....

 

[leadfists]

Re: The Green Tools ****

Just got this micro bottom box to hold my speaker up. Wife even let me keep it in the kitchen, now she even thinks a roll cart for our son's dresser might not be to bad hopefully more green to come to this house.

Sent from my SM-G920V using Tapatalk

 

[Waterh20]

Re: The Green Tools ****

Have not seen these yet (3 row for short mid and deep sockets) , glad i waited and didnt buy the green hansen copies. Hoping for 1/4" and 1/2" next. Part numbers for you vultures!!!

Sent from my SM-G930T using Tapatalk

I like those. Thanks for sharing the pics. I have some traditional short/tall hansen trays. Would be nice to get something like these for extra short sockets too instead of mids for my setup.

 

[dbabicky]

Don't have any pics but, I just picked up the Snap-On CT8850G impact gun and the CDR8815GWB drill. Love them. Got the impact with charger and 2 batteries for $625.00 and the drill with one battery for $375.00 both brand new from the truck. Fairly decent prices so I'm not complaining.

 

[04chase]

Re: The Green Tools ****

A fee to add. Socket holders. Snap on paint on some wilton restorations . A proper ram 5500 hid projector retrofit .and my oxy acetylene safety caps modded and matched

Sent from my SM-G930T using Tapatalk

 

[jeffmoss26]

drooool

 

[SteveSzabs]

Saw a lad post a photo of a custom run of green westling socket trays he had done. Well folks they are finally here!!

http://westlingmachine.com/ToolHolders.html

I'm glad I waited all this time before ordering a set of these!

 

[chrisnazzy]

Saw a lad post a photo of a custom run of green westling socket trays he had done. Well folks they are finally here!!

http://westlingmachine.com/ToolHolders.html

I'm glad I waited all this time before ordering a set of these!

I've been talking to them about orange for awhile. They've indicated they are working on the right hue. Ultimately I decided to be patient and wait for them to start offering it without the custom order.

The green on yours looks a lot brighter and desirable than the darker green that another GJ'er posted awhile back.

Sent from my SM-G930P using Tapatalk

 

[G-Ram]

Re: The Green Tools ****

Well, I guess now I have no choice. I'm going to have to buy another tool box just so I can get those green Westling trays! I love the blue/red ones i have in my work box.


Sent from my iPhone using Tapatalk

 

[G-ManBart]

Honest question...why are you guys buying stuff that's not really in true SO Green? It seems half of this stuff is just a lime green that's sorta, kinda similar, but not really the same.

I thought having stuff actually in the correct color was the idea?

 

[dawgfire]

Found these in a Walmart in Atlanta, none of the ones by me in Houston have them yet. This one didn't have as big a selection as posted above though

 

[OCD]

 

[dbabicky]

I've got that fan also but my frickin' dog chewed the power cord !!!

 

[toy4whatever]

My latest purchase.

 

[Tarpley]

 

[04chase]

Part number?

Sent from my SM-G950U using Tapatalk

 

[archirelic]

Not the final arrangement, just decided to throw the bulk majority of green goodness in my Husky top box I picked up several months ago for some show & tell. Still working on how I'll be setting everything up.

 

[AngryBeaver]

My evolution from a classic 96 in extreme green....

 

[04chase]

Re: The Green Tools ****

Added these today.

Sent from my SM-G950U using Tapatalk

 

[denning]

Long Green Pick Set ;P hope to get more in the future

 

[AngryBeaver]

Here's a few.

 

[AngryBeaver]

Newest acquisition.... stubby 3/8 flex. Shorter than the 1/4" frame with the 3/8 flex I have.

 

[Dookie2122]

From one of the Facebook tool discussion pages

 

[ocloc24]

Re: The Green Tools ****

Added these today.

Sent from my SM-G950U using Tapatalk

How do those ball torx work? Can you actually use them at an angle?

Sent from my SM-G930P using Tapatalk

 

[mattwhite079]

Re: The Green Tools ****

Not mine but work mate bought a new to Aus SO magnetic parts tray. It's like two halves bonded together. Curious how it holds up.


Sent from my iPhone using Tapatalk

 

[Tarpley]

Part number?

Sent from my SM-G950U using Tapatalk

DX194-GREEN

I don''t think it is sold in the U.S. I got mine from the UK.

 

[Wamsutta]

Newest acquisition.... stubby 3/8 flex. Shorter than the 1/4" frame with the 3/8 flex I have.

You're gonna love that stubby 3/8 flex; very useful in all kinds of situations.

 

[AngryBeaver]

You're gonna love that stubby 3/8 flex; very useful in all kinds of situations.

Already do. More than the 1/4" sized flex with the 3/8 head

 

[AngryBeaver]

My shipment came in. Woot woot

 

[04chase]

Re: The Green Tools ****

How do those ball torx work? Can you actually use them at an angle?

Sent from my SM-G930P using Tapatalk

yes but depending on the amount of torque that the fastener has i wont lean on them too hard. being an L wrench you can only torque them so much by hand which is why i like them. If they were a socket i feel id break them.

A close friend lost his eye from a Hex L wrench snapping and a shard hitting his eye. His depth perception and life changed. Where your safety glasses!!