To avoid these ads, REGISTER NOW!

The Milwaukee addiction thread! :)

P

PCMusicGuy

Well-known member
Joined
Feb 15, 2009
Messages
851
Location
Houston, TX
rocket1420 said:
Hard to say for a weekend warrior. If it's just at home, why do you need a cordless? The m12 fuel will cut through plywood and 2x material. I don't have one, but I can't imagine it will last long on a battery. I have the 2730 and it's a beast for what it is. If you go m18, you won't regret having that saw. Plus blades are a little easier to find.
Click to expand...

I was thinking cordless mainly for convenience. There are times I would grab the saw and it would be nice not to have to worry about power or if my extension cords are long enough at the destination. Cordless would save some weight as well without having to worry about the longer extension cords. I have many M12 batteries at the moment so that shouldn't be too big a concern. Realistically, the one M18 battery would likely do all the cuts I would need for my most urgent project on a single charge.

The local blade selection is a factor maybe. I'm 5 minutes from a Home Depot or Lowes and I think it would be a lot easier finding a 6.5" or 7 1/4" blade vs the 5 3/8" blade.
 
To avoid these ads, REGISTER NOW!
I

Ign

Well-known member
Joined
Jul 7, 2006
Messages
12,769
Location
Butte Peak ND
oldldh said:
Just picked up a Compact Blower!!!

Really like it...

But...

The 2Ah batteries aren't big enough...

Amazon has the 4Ah batteries available for $77.55, so I'm going to get one of those...

Question: Does anyone offer the 18volt 5.0 Ah Lithium Ion batteries for less than $129.99???
Click to expand...

Zoro on a 30% sale. There should be one this quarter.

ABSTIFFGS said:
A month or so ago, my lovely wife got me this as a birthday/anniversary gift. I think I'll keep her.

0A4C4A16-8F8F-421C-86F8-9E2D273C8FA3_zpsipnzi0cb.jpg


Then i sold my non fuel version of the 1/2" impact gun and bought this bad boy. Now I've created a new monster. I want all Fuel. I have the protective boot on the way for it.

791CDF9B-4F6D-4416-938E-9A6D8F1D44AA_zpsgvkjfssa.jpg
Click to expand...

Get the 2654 3/8" drive too. Seriously. Or is there a Gen 2 of 3/8" square being released soon? Either way, it'll do 90% of what you want in an impact at a fraction of the weight and size. Mine just pulled lugnuts from my F350 torqued to 165 ft lbs, using an adapter to step up from 3/8" to 1/2" (need to order 21mm deep impact socket in 3/8"). ALTHOUGH the hub centric Fords have less drag on the lugnuts as they don't seat in a taper. Still, I thought the adapter would kill the deal, but no.
 
I

Ign

Well-known member
Joined
Jul 7, 2006
Messages
12,769
Location
Butte Peak ND
PCMusicGuy said:
I was thinking cordless mainly for convenience. There are times I would grab the saw and it would be nice not to have to worry about power or if my extension cords are long enough at the destination. Cordless would save some weight as well without having to worry about the longer extension cords. I have many M12 batteries at the moment so that shouldn't be too big a concern. Realistically, the one M18 battery would likely do all the cuts I would need for my most urgent project on a single charge.

The local blade selection is a factor maybe. I'm 5 minutes from a Home Depot or Lowes and I think it would be a lot easier finding a 6.5" or 7 1/4" blade vs the 5 3/8" blade.
Click to expand...

Fuel's nice but maybe just the 2630-20 for $99 at HD (or there are some flippers who will sell it to you for more than that on eBay, you owe them for their time, duh!). Grab a 4.0 battery here and chargers are on eBay from $20 shipped.

I have the old V28 brushed 6.5" circular and it's fantastic for as little wood as I cut. The only thing it won't do is water-soaked OSB (go figure!).
 
G

Gidge

Well-known member
Joined
Sep 19, 2012
Messages
2,308
Location
New England
I have a Milwaukee tape measure and a standard size corded circular saw and a 1/2" corded hammer drill.

When did Milwaukee start making their tools in China --I still love the tools, just a little disappointed ? :sad:

If my Porter Cable orbital "Tiger saw" ever bites the dust, I'll be replacing that with a Milwaukee "Sawzall".
 
I

Ign

Well-known member
Joined
Jul 7, 2006
Messages
12,769
Location
Butte Peak ND
mobiledynamics said:
I don't even know why that thread is even allowed to exist. It does not seem to reflect GJ but maybe this is the new GJ.....
Click to expand...

The 2630 is $99 online too w free ship. In my case I'd pay some sales tax (4.9% at most) but its still well under what some private party bozos are asking after shipping. Some people don't grasp that having a receipt from an actual retailer has many advantage over eBay private party sales, and especially over CL where you have zero recourse.

Point being (to stay on topic) the OP considering a circular saw could still have this delivered to his door for around $99. If you don't like it, HD generally includes pre-paid return label, or you can return or exchange at your local store.
 
M

Mohawk Dave

Well-known member
Joined
Oct 7, 2012
Messages
5,068
Location
SoCal
Ign said:
SNIP...



Get the 2654 3/8" drive too. Seriously. Or is there a Gen 2 of 3/8" square being released soon? Either way, it'll do 90% of what you want in an impact at a fraction of the weight and size. Mine just pulled lugnuts from my F350 torqued to 165 ft lbs, using an adapter to step up from 3/8" to 1/2" (need to order 21mm deep impact socket in 3/8"). ALTHOUGH the hub centric Fords have less drag on the lugnuts as they don't seat in a taper. Still, I thought the adapter would kill the deal, but no.
Click to expand...

I agree with this 110%. I have the big 1/2" FUEL, but got the 2654 and it gets used A LOT. The big dog only comes out when the 2654 can't do something, which is seldom unless I'm working on rusty tractors and trailers.
 
A

ABSTIFFGS

Well-known member
Joined
Feb 4, 2014
Messages
304
Location
Twin Cities, MN
Ign said:
Zoro on a 30% sale. There should be one this quarter.



Get the 2654 3/8" drive too. Seriously. Or is there a Gen 2 of 3/8" square being released soon? Either way, it'll do 90% of what you want in an impact at a fraction of the weight and size. Mine just pulled lugnuts from my F350 torqued to 165 ft lbs, using an adapter to step up from 3/8" to 1/2" (need to order 21mm deep impact socket in 3/8"). ALTHOUGH the hub centric Fords have less drag on the lugnuts as they don't seat in a taper. Still, I thought the adapter would kill the deal, but no.
Click to expand...
I am already considering that one. I really like this gun, but it sure is heavy. Damn you, I feel you have talked me into it:beer:
 
Last edited:
W

Wanna Ride

Well-known member
Joined
Jul 28, 2010
Messages
2,790
PCMusicGuy - I have the regular M18 circ saw and it works great for everything I need from it. It's really nice to not have to drag out a cord and all that **** just to make a couple cuts. I've never cut more than three or four boards with it a time, so I can't say how long the batteries will last in it. I know that when I use it, it never seems to be inadequate. I love it, event though I use it very little, I just couldn't justify the cost of the Fuel version, for how little I use it.
 
I

Ign

Well-known member
Joined
Jul 7, 2006
Messages
12,769
Location
Butte Peak ND
ABSTIFFGS said:
I am already considering that one. I really like this gun, but it sure is heavy. Damn you, I feel you have talked me into it:beer:
Click to expand...

So yeah, the 2654 is being replaced by the 2754
http://www.milwaukeetool.com/power-tools/cordless/2754-20

Milwaukee's site says Fall 2015 but I thought I saw it at a couple retailers (Toolbarn being one) during my search. I didn't click on any to see if this is a pre-order situation or they're in stock.
 
M

Mohawk Dave

Well-known member
Joined
Oct 7, 2012
Messages
5,068
Location
SoCal
Ign said:
So yeah, the 2654 is being replaced by the 2754
http://www.milwaukeetool.com/power-tools/cordless/2754-20

Milwaukee's site says Fall 2015 but I thought I saw it at a couple retailers (Toolbarn being one) during my search. I didn't click on any to see if this is a pre-order situation or they're in stock.
Click to expand...

2754= 10 ft lbs more, .1lb lighter, .1" longer, +100ipm....Was it even worth it?.....shoot, hope the 2654 goes on sale. (Even though I have it, I'd probably buy another.)
 
I

Ign

Well-known member
Joined
Jul 7, 2006
Messages
12,769
Location
Butte Peak ND
ABSTIFFGS said:
Curious about this as well. Are the extra features really worth it?
Click to expand...

I think Tools In Action or COP Tool or someone has a video (don't care enough to search). Stu at Toolguyd.com swears all the next-gen impacts have worthwhile improvements.

But you guys echo my sentiments exactly - Milwaukee keeps doing mild re-designs on drills and impacts while not bringing out new products -- or, at least, new products I want!! And while the changes seem subtle, it's often an entirely new case, internals etc.....seems to me it's just as much design work and production line change to build a whole new drill or something like a cordless inflator.
 
K

Kracin

Well-known member
Joined
Mar 25, 2013
Messages
1,666
Location
Omaha, NE
ABSTIFFGS said:
Curious about this as well. Are the extra features really worth it?
Click to expand...

i would say no, not if it costs any bit more than the old one. a mode that cuts off after 1 second of impact? so does my finger. its not a lot more powerful, doesnt last a ton longer, so id rather have a discounted old version. imho the only one so far that looks like an improvement is the grinder with its brake.
 
C

Caparris

Well-known member
Joined
Nov 27, 2011
Messages
939
Location
Greensboro, NC
The BEAST!

I would very much recommend the rubber boot for it. Works quite well at preventing the plastic from getting torn up.

Mine has some wear on the rubber boot and the battery but that's pretty much it
 
R

Rock Hound

Well-known member
Joined
May 30, 2015
Messages
165
Location
Southeast Ohio
PCMusicGuy said:
I have need of a circular saw for basic work (cutting 2x lumber and plywood mostly). I already have several M12 tools and I know the M12 fuel circular saw has received pretty good reviews.
Click to expand...

I have the M12 circular saw and very much like it. I bought it when CPO was giving a free 4.0 battery. I very much like the saw; I built a small deck with it recently cutting all of the 2x's we had with it (my friend cut anything thicker with a corded tool), the 4.0 battery held out for the whole build (maybe 250 square foot deck), but there wasn't much left in it at that point, I had a second battery available so it wouldn't have been a problem. What I love the most about it is how light it is.

If I were a professional and time=money, I would not use it for heavy grunt work, but for me I would rather take a little more time and use the lighter tool. For me the M12 was an awesome buy and I do not regret it in the slightest.
 
To avoid these ads, REGISTER NOW!
K

kctyphoon

Banned
Joined
Jun 9, 2014
Messages
9,102
Location
Jersey/Staten Island
i have the utility version of that impact. it has a 7/16 hex drive chuck on it, and for whatever reason, i believe its de-tuned for a lower torque setting.. even still - it ANNIHILATES the corded impacts we use for utility work..
 
O

OHMS LAW

Well-known member
Joined
Jun 8, 2012
Messages
927
Location
Houston TX
Today a new tool vendor came by. I haven't seen a cornwell truck before and I took a gander. I must say I do like some of their offering. Anyway not to stray off point I was able to compare the m18 1/2 impact vs my 8850 snap on and although it was not as heavy it impressed me how powerful it was. The only draw back was the lack of an anvil brake. Other than that It has definitely opens my eyes and will be looking to step in to the fuel world. If not for work then definitely at home
 
7

71goldss

Well-known member
Joined
May 23, 2012
Messages
1,513
Location
Northern Calif
Rock Hound said:
I have the M12 circular saw and very much like it. I bought it when CPO was giving a free 4.0 battery. I very much like the saw; I built a small deck with it recently cutting all of the 2x's we had with it (my friend cut anything thicker with a corded tool), the 4.0 battery held out for the whole build (maybe 250 square foot deck), but there wasn't much left in it at that point, I had a second battery available so it wouldn't have been a problem. What I love the most about it is how light it is.

If I were a professional and time=money, I would not use it for heavy grunt work, but for me I would rather take a little more time and use the lighter tool. For me the M12 was an awesome buy and I do not regret it in the slightest.
Click to expand...

+1
I picked up my M12 Fuel circular saw during the same free 4.0 battery promo, but from Toolbarn because CPO was out of stock when I placed my order. I love the M12 for quick DIY cuts around the house, though I'm sure it's capable of much more! I already have a corded 7 1/4" Makita 5007 for bigger jobs, and the discontinued Craftsman 7 1/4" C3 that I'm very happy with, so it took awhile to convince myself that I needed the 5 3/8" M12. No regrets at all! Very light and compact, and so far cuts everything that I was using my other saws for. Also, a big plus for me is the left side blade like my C3. This is already my "go to" saw and it'll proabaly be a long time before I ever pull out one of my larger saws!
 
S

Stuey

Well-known member
Joined
Jan 8, 2008
Messages
11,034
Location
28m above sea level
Ign said:
I think Tools In Action or COP Tool or someone has a video (don't care enough to search). Stu at Toolguyd.com swears all the next-gen impacts have worthwhile improvements.

But you guys echo my sentiments exactly - Milwaukee keeps doing mild re-designs on drills and impacts while not bringing out new products -- or, at least, new products I want!! And while the changes seem subtle, it's often an entirely new case, internals etc.....seems to me it's just as much design work and production line change to build a whole new drill or something like a cordless inflator.
Click to expand...
If you're not in a rush to jump to Fuel, and I don't mean you specifically, wait for Gen2 and then another month to ensure potential initial issues are ironed out.

Differences do look susbtantial to me, but judge for yourself:

http://toolguyd.com/milwaukee-m18-fuel-brushless-drills-2703-2704/

http://toolguyd.com/milwaukee-m18-fuel-impact-driver-compact-wrenches-gen2/

They're practically new tools, especially the impacts.

We might never see Milwaukee or Dewalt inflators. And I think Porter Cable got rid of theirs before the change to 20V Max slide packs.

As it was explained to me once, inflators don't fit into some brands' "professional tools" images.
 
K

kctyphoon

Banned
Joined
Jun 9, 2014
Messages
9,102
Location
Jersey/Staten Island
Stuey said:
If you're not in a rush to jump to Fuel, and I don't mean you specifically, wait for Gen2 and then another month to ensure potential initial issues are ironed out.

Differences do look susbtantial to me, but judge for yourself:

http://toolguyd.com/milwaukee-m18-fuel-brushless-drills-2703-2704/

http://toolguyd.com/milwaukee-m18-fuel-impact-driver-compact-wrenches-gen2/

They're practically new tools, especially the impacts.

We might never see Milwaukee or Dewalt inflators. And I think Porter Cable got rid of theirs before the change to 20V Max slide packs.

As it was explained to me once, inflators don't fit into some brands' "professional tools" images.
Click to expand...

do you know when the new M18 lights are being released?
 
I

Ign

Well-known member
Joined
Jul 7, 2006
Messages
12,769
Location
Butte Peak ND
Stuey said:
If you're not in a rush to jump to Fuel, and I don't mean you specifically, wait for Gen2 and then another month to ensure potential initial issues are ironed out.

Differences do look susbtantial to me, but judge for yourself:

http://toolguyd.com/milwaukee-m18-fuel-brushless-drills-2703-2704/

http://toolguyd.com/milwaukee-m18-fuel-impact-driver-compact-wrenches-gen2/

They're practically new tools, especially the impacts.

We might never see Milwaukee or Dewalt inflators. And I think Porter Cable got rid of theirs before the change to 20V Max slide packs.

As it was explained to me once, inflators don't fit into some brands' "professional tools" images.
Click to expand...

Most contractors are running around on Load Range E tires and likely have trailers too. A cordless inflator truly capable of 80psi is just as useful as a jobsite radio, or a lantern (which truly does seem meant for camping), and arguably more useful than heated gear.

Not professional my ***, esp compared to some of the offerings mentioned above.

I thought Astro was coming to the rescue w an inflator powered by li-ion jumper packs, but it too only goes to 35psi. Wanna separate Prius homeowner from 3/4 ton professional? GO OVER 35 PSI!!!
 
S

Stuey

Well-known member
Joined
Jan 8, 2008
Messages
11,034
Location
28m above sea level
Ign said:
Most contractors are running around on Load Range E tires and likely have trailers too. A cordless inflator truly capable of 80psi is just as useful as a jobsite radio, or a lantern (which truly does seem meant for camping), and arguably more useful than heated gear.

Not professional my ***, esp compared to some of the offerings mentioned above.

I thought Astro was coming to the rescue w an inflator powered by li-ion jumper packs, but it too only goes to 35psi. Wanna separate Prius homeowner from 3/4 ton professional? GO OVER 35 PSI!!!
Click to expand...

I didn't say that it was my opinion or stance. I'm all up for a Milwaukee or Dewalt inflator.

But when I spoke to a product manager, I think it was someone at Porter Cable back when their 20V Max drill and driver came out and we were talking about brand perception, I was told that inflators don't fit in with some brands' images.

I took that as an explanation as to why we won't see a Dewalt cordless inflator, and applied it to explain why we haven't seen a Milwaukee inflator thus far.

Maybe both brands have changed their tunes, but if so then we should have seen such a tool by them by now. Maybe they will change their tune later on.
 
K

kctyphoon

Banned
Joined
Jun 9, 2014
Messages
9,102
Location
Jersey/Staten Island
Ign said:
Most contractors are running around on Load Range E tires and likely have trailers too. A cordless inflator truly capable of 80psi is just as useful as a jobsite radio, or a lantern (which truly does seem meant for camping), and arguably more useful than heated gear.

Not professional my ***, esp compared to some of the offerings mentioned above.

I thought Astro was coming to the rescue w an inflator powered by li-ion jumper packs, but it too only goes to 35psi. Wanna separate Prius homeowner from 3/4 ton professional? GO OVER 35 PSI!!!
Click to expand...

i agree with much of this, but not all.. mostly about the heated gear, cause i work outside everyday, have 2 of them, and those things are ****** great.
that said - most anyone that has a use for a cordless drill and saw has a use for an air compressor. the only thing limiting them as a "homeower" grade tool, is the design and capability OF that tool. ive said it a few times, that i would love for Milwuakee to design a jump pack that was powered by 2 or more m18 batteries, and doubled as a multi-bay charger for those batteries as well. im sure im not the only person driving around with an m18 flashlight and impact in the back of my car just in case of an emergency, along with an air compressor as well.. i already have 2 batteries with me, why not take an m18 compressor too..
 
G

gipraw

Well-known member
Joined
Apr 25, 2013
Messages
1,033
Location
Cypress, TX
Finally unboxed the anniversary present from my wife. So far I am very happy with it.

attachment.php
 
Last edited by a moderator:
You must log in or register to reply here.
To avoid these ads, REGISTER NOW!
Top Bottom