Bruce Wayne
Well-known member
You don't say.
I have no idea why the pics aren't loading...
The Milwaukee addiction thread! :)
- Thread starter JustinsGr8
- Start date
I have no idea why the pics aren't loading...
ptgarcia
Well-known member
imgur links don't work unless you remove the "s" after "http".
MikeF2316
Well-known member
JohnKal
Well-known member
Bruce Wayne
Well-known member
Thank you very much!
Been wanting to pick up one these
fordgasm
Well-known member
maybe its the knife snob in me but I haven't been impressed with Milwaukees knife offerings, mainly think they are over priced.
Yup, all mine came with the M12 mag combo I get deals on, last one I figure cost me $20, no way I would pay the $60 retail.
BTW - There are new gen Brushless drills & impacts out like the Fuel Gen3's, if they come out with new gen brushed they are idiots, no reason to maintain 4 diff models on M18 tools.
BTW - There are new gen Brushless drills & impacts out like the Fuel Gen3's, if they come out with new gen brushed they are idiots, no reason to maintain 4 diff models on M18 tools.
a52-830
Well-known member
is that the knife that is bundled with the M12 flashlight? i just ordered one of those sets on the last ebay 15% coupon.
i have a red handled one that i got from HD for 3.03$ a few months ago. seems nice enough, although a bit bulky . . . .
i have a red handled one that i got from HD for 3.03$ a few months ago. seems nice enough, although a bit bulky . . . .
Bruce Wayne
Well-known member
I paid ~$50 for mine. I just wish that it had a spring assist to aid in the opening.
Crazyjake8493
Well-known member
M12 Rocket light available for pre-order on AcmeTools.
https://www.acmetools.com/shop/tools/milwaukee-2132-20
https://www.acmetools.com/shop/tools/milwaukee-2132-20
PelicanPines
ALLIANCE MEMBER
My M12 cutoff tool arrived from tool nut... so says my wife... soon as I get home... photos.
Any input on m12 vs m18 rocket light? More compact m12 versus higher output on m18...
Sent from my Pixel 2 XL using Tapatalk
Sent from my Pixel 2 XL using Tapatalk
WunTon
Well-known member
Scored this for $360 on CL today! I think it was a good deal...
PelicanPines
ALLIANCE MEMBER
At that price... it might be stolen
...
Well-known member
Not necessarily, I got mine from Home Depot for $300-10% so $270. There were a few stores by me that had them on clearance at $300 and I just happened to walk into one of them.
I found another saw at another store later that week for the same price so it may have been a regional thing, but they are all back up to normal prices now.
PelicanPines
ALLIANCE MEMBER
WunTon
Well-known member
My boss thought he paid around $300 for his as well but he self admits that he buys things and then tells himself he paid less all the time so he didn't remember for sure. Either way at $360 I am very happy to have it for all of the projects I have coming up. I also stopped at HD on my way and grabbed the high torque impact for $219 with a free 5.0 battery pack.
No doubt that's a killer deal no matter what. I wouldn't worry about it being stolen, guy probably bought it on clearance and is reselling or just bought it and never used it
WunTon
Well-known member
He said he bought it to build himself a shed and then decided to pay someone to build the shed instead so he decided he didn't need it. Either way I am happy!
PelicanPines
ALLIANCE MEMBER
I do it the other way around... I do stuff myself and buy crazy tools with the money I saved. Like the M12 Cut Off saw... didn't need it but was very proud of the job I recently did on a tile job... So I gifted myself. I add this M12 to my other TWO wet saws, wet grinder and wet bandsaw.
JohnKal
Well-known member
VIPOUTLET is also included in this deal - no affiliation.
They have a few Milwaukee tools,new and refurbished.
I've never bought anything from them and was waffling on the m12 Jig Saw.
Meanwhile it's now out of stock. Shuffle your feet and lose your seat.
Crazyjake8493
Well-known member
I have a 2130 M18 light that's seen plenty of use, but I'll still be getting the M12 version to go along with it. Sometimes I need a stand light in an attic or somewhere that the M18 is just too heavy or bulky. I rarely need the full 7' extension of the M18, so 5 1/2' with the M12 would be plenty and giving up some weight.
I also use the M18 as our backyard lighting for cookouts, playing horseshoes well into the night. I usually aim it at one end and the search light the other direction, with two Rockets I'd be fully covered!
HighwayTrout
ALLIANCE MEMBER
Just picked up a 4 1/2” grinder at home desperate today. Free XC 5.0 battery with purchase. Not bad being I have been on the fence with buying one for awhile.
jimreed2160
Well-known member
WooHoo! Thanks for the heads up.
I have been lusting after the mobile packout but was stuck on price. With discount I just got the full monty for only $209.99 with free shipping from CPO.
rmack898
Well-known member
This has been at the top of my list. The HD web page did not list the fuel grinder in this deal.
I just came back from HD and got the M18 Fuel grinder for $149 and the 5.0 battery for free. I have been waiting for this deal.
HighwayTrout
ALLIANCE MEMBER
PelicanPines
ALLIANCE MEMBER
Me too. Got the M12 cutoff tool yesterday... I ordered it with the stubby... no word on the stubby yet. Toolnut is not a supplier that warns/updates you on shipping proactively.
I’m probably going to buy a second grinder while this sale is happening, that way I can have one with a grinding wheel and one with a flap wheel.
theoldwizard1
Well-known member
How about a review !
manwithtools
ALLIANCE MEMBER
Mine (x2) will be delivered Tuesday.
All the deals are here https://www.homedepot.com/collectio...ect-M18-Kits/Family-306716566?omsid=305907274
Shows the fuel grinder for me.
Sotex
Member
dekleijn
Member
Hello all, I am looking at upgrading some of my power tools to milwaukee. I am currently looking into the 300nm impact wrench for around home and on the farm.
So my question to you all is whether to get one with the friction ring or the indent pin to keep the socket on the gun and what is usually preferred.
Thanks in advance.
Sent from my SM-G950F using Tapatalk
So my question to you all is whether to get one with the friction ring or the indent pin to keep the socket on the gun and what is usually preferred.
Thanks in advance.
Sent from my SM-G950F using Tapatalk
WittHay
Well-known member
I have 5 Milwaukee impacts from 3/8 to 3/4, all with friction ring. Detente pin is usually for single socket applications like construction or changing tires at the racetrack.
For farm use i would recommend the Milwaukee 610nm mid torque. It will handle the common 18/19mm socket size found on disc mowers and other tractors and equipment. The compact 300nm will struggle on some of those applications