The Milwaukee addiction thread! :)

[javyLSU]

Well... I checked out those blades on the HD website, apparently here's what's available locally...

6-inch single: No
6-inch 3-pack: No
9-inch single: Yes ($9.97)
9-inch 3-pack: Yes ($24.97)
12-inch single: Yes ($12.97)
12-inch 3-pack: No

So, I went to the store in Bellingham, MA, grabbed a 12-inch single, and a 9-inch 3-pack.

On my way to the counter, I checked out the Milwaukee display in the front aisle, and found 9-inch special BOGO packs (2 blades in the pack, for the price of 1). Price was $9.97.

So, I put the 3-pack back, and grabbed two of the BOGO (2-blade) packs.

Instead of $24.97 for 3 blades, I paid $19.94 for 4 blades. Woo hoo!

In the BOGO packs, they had several varieties (tooth counts), but all were 9-inches. These must have been popular, because they were down to a handful of each size.

Weirdly, this deal didn't come up online when I was looking for the blades.

The bigger ones are fine for me (for now), as I have a bunch of big, old stumps to cut up and burn (I dug them up with a backhoe, over a decade ago). There are rocks entwined within the roots, so I'm not going near them with the chainsaw. I have a cheapo HF corded sawzall for this job.

If (OK, when) I break down and buy a Hackzall, I'll try harder to get some of the 6-inch blades for smaller jobs. Lord knows, I've worked WAY too hard pulling mini-stumps with mattocks over the years.

Mike

Let me know how that works out. I thought about buying some of those 9” blades this week but was worried they would bend when using them for roots…

 

[mikeinri]

I don't really plan to stick these in the ground (at least not the 12-inch). I'll try to remember to take and post pics when I tackle the job.

Mike

 

[48548]

I'd imagine that the concern is water up top, not on the bottom. The motor should be sealed off from wet grass and moisture getting up to it where the shaft comes through. I think this is more of a don't use when it is raining out kind of concern. They probably didn't do a good job weatherproofing the battery compartment and the motor is probably air cooled with an impeller which would **** rain/water into. That is my guess, haven't seen one up close just yet myself. Maybe that is the gen 1 fatal flaw in the mower?

It is not sealed on top just a lid and no gasket. I think it take a lot to get in, but would advise to be carefull.

 

[mrvm]

Yeah I got an addiction. Got the M18 16” chain saw and hedge cutter in the cart …..

 

[Rusty67]

Clarks is having a sale on that chainsaw right now.

 

[dacan23]

Shocked to see this in store, so you have the display one up top, 2 boxed, and one assembled to play with, so really 3 for sale. Should mark the boxes to see how long they sit there. Store had 100+ of the latest Dewalt a few weeks ago which they have sold at least half since.

Interesting it was right next to the top Ryobi. What I noticed is the safety lever and propel throttle are very similar. Anyone that thinks there is not some info sharing between Milwaukee & Ryobi is a fool. I usually thought it was Milwaukee to Ryobi but this suggests its the other way too, of all the mowers in store no other had that design besides Ryobi.

Here's my fondling thoughts, interested what those who have it think. The thing is heavy and that's without batteries, I can't imagine pushing it around without propel much, it felt like it took more effort to push than my last non propelled gas mower. While the handle with safety lever seems more comfortable than my Makita (whose handle is horrible and very uncomfortable), the whole thing with buttons and speed adjust etc seems very cheap, not the quality expected for $1k. There is only 5 height adjustments, which seems less than anything else.

 

[dacan23]

What, now there's 4 hedge trimmers!?!? Original M18 24", articulating attachment one, new M18 18" and new M12 8". Whats next a M12 mower......

M12 FUEL™ 8" Hedge Trimmer | Milwaukee Tool

MILWAUKEE® M12 FUEL™ 8” Hedge Trimmer has the power to cut ½” branches. Included in the kit is our compact Hedge Trimmer, M12™ REDLITHIUM™ XC4.0 battery, and M12™ Charger.

www.milwaukeetool.com

How many years too late is this.

Chainsaw Case | Milwaukee Tool

MILWAUKEE® Chainsaw Case is a storage and transport solution for the M18 FUEL™ Chainsaw. Includes a scabbard and a detachable oil bottle compartment for easy cleaning

www.milwaukeetool.com

Yeah the XL packout cooler is coming, gonna be $199 I predict

PACKOUT™ 40QT XL Cooler | Milwaukee Tool

Our PACKOUT™ 40QT XL Cooler keeps food & beverages cold with the ability to hold ice for 5 days. The Milwaukee PACKOUT™ 40QT XL Cooler is constructed with an impact resistant body for ultimate jobsite durability. This jobsite cooler is IP65 rated to withstand harsh environments and jobsite...

www.milwaukeetool.com

 

[purplezr2]

I wish the chainsaw wasn't so long so it was fit in a saw box like my Husky saw does. They they would match.

Wonder how much they will want for this saw box

 

[Rusty67]

That new 8" m12 hedge clipper is EXACTLY what I've been waiting for. I have the original 24" and love it. The 18" was way too long for detail work and having a 1 hander is what I was hoping for. Looks like this is only sold in the kit at the moment and it is 250? I don't need another charger/batter. Hopefully they release a tool only.

 

[dacan23]

That new 8" m12 hedge clipper is EXACTLY what I've been waiting for. I have the original 24" and love it. The 18" was way too long for detail work and having a 1 hander is what I was hoping for. Looks like this is only sold in the kit at the moment and it is 250? I don't need another charger/batter. Hopefully they release a tool only.

Ouch $250 seems steep, that's like $169 bare tool which is same price as the M18s, but what M12 fuel tool is less than $150. Sure it seems useful, just like all the old corded clippers, I'm picturing a old B&D model. But they are so version happy, 2 new hedge's this year but what about all the other OPE items they lack. The cooler is maybe a good example, they made 4 cooler versions before making the one people actually wanted. In some ways their product vision is good, in other ways its way off and takes too long to correct.

 

[Rusty67]

I know what you mean, the v1 curse is real for sure. I've been very happy with my OG 24" and gotten a TON of use from it, this little 8" is just what the doctor ordered for some of the stuff at my house as well as my parent's place. I'm going to wait for it to release and see if there is a promo on it. I could all but get rid of my hand sheers if I got this little guy.

 

[javyLSU]

I know what you mean, the v1 curse is real for sure. I've been very happy with my OG 24" and gotten a TON of use from it, this little 8" is just what the doctor ordered for some of the stuff at my house as well as my parent's place. I'm going to wait for it to release and see if there is a promo on it. I could all but get rid of my hand sheers if I got this little guy.

I actually used my "OG 24" yesterday, that thing really is a beast. It can get a little heavy after a while, but MAN does it chew through pretty much anything I ask it to.

 

[logixjock]

In some ways their product vision is good, in other ways its way off and takes too long to correct.

I really wanted a dual battery version of the top off inverter, maybe in 5 years or so.

 

[ThatSickRip]

That new 8" m12 hedge clipper is EXACTLY what I've been waiting for. I have the original 24" and love it. The 18" was way too long for detail work and having a 1 hander is what I was hoping for. Looks like this is only sold in the kit at the moment and it is 250? I don't need another charger/batter. Hopefully they release a tool only.

Agreed. I have the 24" and the attachment for the quik lok, but I couldnt justify the M12 price, so I went with a Ryobi for $69 and some HD coupons

 

[dacan23]

Agreed. I have the 24" and the attachment for the quik lok, but I couldnt justify the M12 price, so I went with a Ryobi for $69 and some HD coupons

In Milwaukee's strategy you are a small segment willing to go outside their ecosystem. We all have thought many times, but personally I eventually **** it up and wait or fork over the extra $. Right now I can say the OG 24 & quik lok death hedge attachement serves my needs but someday if needed I would get the M12. Just like I never thought I would want the M12 hatchet, have chainsaw, sawzall, all the hackzalls, but the hacthet would work well for all my fruit trees. The only none Milwaukee I have is the Makita mower and now Kobalt razor scooters. OMG I would buy Milwaukee electric scooters or bikes in a heartbeat.

 

[dacan23]

I really wanted a dual battery version of the top off inverter, maybe in 5 years or so.

After I get the mower and it brings my 12s to 5, gimme a M18x2 car jumper. After how many years Dewalt & others have had 2-4 battery power stations yet we only have the outrageous MX one.

 

[Odd-job]

I am now visualizing some GJ Milwaukee addict dual wielding a hatchet and one of these shorty hedge trimmers. Be careful with your fingers and other important appendages!

 

[mepstein]

Tried out my m18 blower. Meh. It will be ok for light duty patio cleaning but I was expecting a bit more power.
I have a 13hp walk behind blower for the big stuff but it’s 130lbs so not easy to use if I have to walk up steps or get in a planting bed.

 

[Rickkyyr8]

Assembled tonight

 

[Shaners256]

Shocked to see this in store, so you have the display one up top, 2 boxed, and one assembled to play with, so really 3 for sale. Should mark the boxes to see how long they sit there. Store had 100+ of the latest Dewalt a few weeks ago which they have sold at least half since.

Interesting it was right next to the top Ryobi. What I noticed is the safety lever and propel throttle are very similar. Anyone that thinks there is not some info sharing between Milwaukee & Ryobi is a fool. I usually thought it was Milwaukee to Ryobi but this suggests its the other way too, of all the mowers in store no other had that design besides Ryobi.

Here's my fondling thoughts, interested what those who have it think. The thing is heavy and that's without batteries, I can't imagine pushing it around without propel much, it felt like it took more effort to push than my last non propelled gas mower. While the handle with safety lever seems more comfortable than my Makita (whose handle is horrible and very uncomfortable), the whole thing with buttons and speed adjust etc seems very cheap, not the quality expected for $1k. There is only 5 height adjustments, which seems less than anything else.

For what it's worth, it has 7 height settings.

 

[Odd-job]

Assembled tonight

the next step is a Milwaukee tattoo!

 

[Rusty67]

I buy a fair amount of Milwaukee stuff. I even bought some jackets/sweatshirts because I liked them and wanted heated gear. I legit don't understand people tattooing brand loyalty onto their skin. I'm really hoping that was photoshop or sharpie.

 

[dacan23]

I buy a fair amount of Milwaukee stuff. I even bought some jackets/sweatshirts because I liked them and wanted heated gear. I legit don't understand people tattooing brand loyalty onto their skin. I'm really hoping that was photoshop or sharpie.

*inkzall

Assembled tonight

Everytime I see your mat it makes me want to order one grrr

 

[Odd-job]

I know the moment I get tattoo, Milwaukee is going to cheat on me and walk away from the existing 12v and 18v platforms. This is sort of like getting tattoos of the names of significant others might be a bad idea.

 

[dacan23]

Wish I had the Milwaukee to test during first mow of the year last night, wanted to smash my Makita to pieces was so frustrated with it dying & struggling to do a decent job. There's a bunch of negative reviews on the HD product page concerning now, though seems to be lemon/quality issues perhaps related to the cheap button switch etc section on the handle which I observed.

 

[danski0224]

QC issues will be fixed as soon as the beta test is over....

 

[dacan23]

QC issues will be fixed as soon as the beta test is over....

Is this before or after the FSM update to stop the mower taking out flower beds?

 

[Rusty67]

Value engineering is a ************.

 

[danski0224]

Is this before or after the FSM update to stop the mower taking out flower beds?

Flower beds are clearly a user problem.

The mower works fine.

 

[Rickkyyr8]

 

[Odd-job]

Just got one too! Didn't expect Home Depot to deliver so quickly.

Quieter than my 30 gallon oil lubed compressor.

Definitely need to install some feet opposite the handle. Also trying to figure out a tire inflation setup. Thinking a locking chuck like one of these:

https://www.amazon.com/dp/B00HFLAPOS/?tag=atomicindus08-20

Any issues with letting the regulator set the pressure when inflating tires? I tend to over inflate slightly and then air down with a Longacre tire gauge.

 

[Rickkyyr8]

Just got one too! Didn't expect Home Depot to deliver so quickly.

Quieter than my 30 gallon oil lubed compressor.

Definitely need to install some feet opposite the handle. Also trying to figure out a tire inflation setup. Thinking a locking chuck like one of these:

https://www.amazon.com/dp/B00HFLAPOS/?tag=atomicindus08-20

Any issues with letting the regulator set the pressure when inflating tires? I tend to over inflate slightly and then air down with a Longacre tire gauge.

I just got mine delivered today and haven’t spent much time with it at all, HD delivered mine in 2 days!

 

[Rickkyyr8]

Yeah I got an addiction. Got the M18 16” chain saw and hedge cutter in the cart …..

You’ll love the blower

 

[dacan23]

Just got one too! Didn't expect Home Depot to deliver so quickly.

Quieter than my 30 gallon oil lubed compressor.

Definitely need to install some feet opposite the handle. Also trying to figure out a tire inflation setup. Thinking a locking chuck like one of these:

https://www.amazon.com/dp/B00HFLAPOS/?tag=atomicindus08-20

Any issues with letting the regulator set the pressure when inflating tires? I tend to over inflate slightly and then air down with a Longacre tire gauge.

If you have standing handle up, don't have it on stairs if its filling, mine just fell down the stairs other day. Been meaning to add the feet also, not sure it would of prevented the fall. Any built in pressure measurement is usually ****, I always use a gauge to check after.

 

[Odd-job]

If you have standing handle up, don't have it on stairs if its filling, mine just fell down the stairs other day. Been meaning to add the feet also, not sure it would of prevented the fall. Any built in pressure measurement is usually ****, I always use a gauge to check after.

Going to try rivnutting some feet to it. Figure the feet will at least help it from sliding around, although planning in tossing it in the back of the pickup truck with a bunch of other **** which will definitely cause some battle scars.

 

[Rusty67]

I have a relatively large/loud craftsman that I used to use all the time. I'm not sure I even need an air compressor anymore now that I've got so many electric power tools. I think my grease gun is the last thing I've got that needs air power. I don't have a needle scaler or a air hammer so I think if I get a red grease gun, I wont need my air compressor for anything?

 

[Renegade1LI]

You’ll love the blower

Very disappointed with the blower, really thought it would have more power, exchanged for another one & the same. Bought the dewalt 60 volt no comparison. Gave the milwaukee to my wife, it's ok for little stuff.

 

[Odd-job]

I have a relatively large/loud craftsman that I used to use all the time. I'm not sure I even need an air compressor anymore now that I've got so many electric power tools. I think my grease gun is the last thing I've got that needs air power. I don't have a needle scaler or a air hammer so I think if I get a red grease gun, I wont need my air compressor for anything?

despite my Milwaukee addiction there are some things that I use to the extent I can't live without air. Air hammer, needle scaler, mini impacting ratchet, blow guns, blow guns that shoot fluids, mini pencil die grinder, recharging my sureshot and water fire extinguisher, etc. The portable air compressor is definitely going to come in handy.

 

[Rusty67]

I do need to get a sureshot...

 

[mikeinri]

That Milwaukee compressor will drive an air hammer?

Mike