The OFFICIAL "FREE SOCKET" thread!

[wvrailroader]

Re: The OFFICIAL "FREE SOCKET" thread!

These sockets are ones that came in some boxes of stuff I have bought at auction. I don't need them as I probably have at least 4 like each of them lol. I will add some others as I clean out some of the various boxes of stuff in the garage.

Craftsman USA

1/2" Drive

47505 VV 5/8" 12 pt shallow (has damage from use on impact)
47527 G 13/16" 12 pt deep (slight impact damage on drive end)
47512 VV 7/8" 12 pt (some impact damage on drive end)

 

[aggie91]

found it...my son had it...

 

[npover]

Hi All,

I have a Husky set that is missing a 20510 10 mm 6-point socket for 1/4" drive. I'm trying to complete the set and don't want to settle for just buying another generic 10mm socket. Any chance someone out there has a spare from this particular set? I'd be happy to pay for the dang thing if necessary and either way, I'm going to pay it forward to someone else! Good Karma Out = Good Karma In (usually)!

Thanks!

>Nick- Scottsdale, AZ

 

[Spn1025]

Hi All,

I have a Husky set that is missing a 20510 10 mm 6-point socket for 1/4" drive. I'm trying to complete the set and don't want to settle for just buying another generic 10mm socket. Any chance someone out there has a spare from this particular set? I'd be happy to pay for the dang thing if necessary and either way, I'm going to pay it forward to someone else! Good Karma Out = Good Karma In (usually)!

Thanks!

>Nick- Scottsdale, AZ

Doesn't HD sell single Husky sockets? Can't you just buy it for under $2? Or does your set look different than the ones they sell now?

Edit $1.68 http://m.homedepot.com/p/Husky-1-4-in-Drive-10-mm-6-Point-Metric-Standard-Socket-H4D6P10MM/202911908

 

[npover]

Thanks for the reply, Spn1025!
I did find the same socket you sent me the link for at my local HD, but my socket does look different than this one. I am trying to find the same style as the one in the original set, which has two thin lines cut out around the base where the name, model and size of socket are stamped. I know it sounds stupid, but I just want the same style socket to complete the set. It's easy enough to buy the replacement socket at HD for functionality, but I thought I would try to find the exact one I need. If I'm unable to do this, I will just give up and buy the replacement from HD.

I appreciate the clearance link as well; never Knew it was possible to get something from HD for so cheap; can't beat a penny!

Cheers!

>Nick

 

[customtronic]

Great idea! I know I have some extras and will post them up in the next day or two.

 

[christopher7390]

Wish List:

1/2-
Deep- 1 1/8, 1 1/16, 1/2, 7/16, 3/8, 27, 23, 12, 11, 10
Shallow- 27, 11

3/8-
Deep- 1, 15/16, 7/8, 5/16, 1/4, 8, 7, 6
Shallow- 1, 15/16, 7

1/4-
Deep- 5/8, 15, 5.5, 4.5
shallow- 5/8, 15, 5, 4

Not expecting for somebody to give me everything I posted.. anything is greatly appreciated!

 

[tearlessj]

I've got some sockets I can give away. What's the best way to save money on postage though?

 

[Jawn]

I've got some sockets I can give away. What's the best way to save money on postage though?

Small padded envelope. IIRC that's only a couple bucks to send.

 

[Vbwiley92]

Re: The OFFICIAL "FREE SOCKET" thread! : NOT a "wanted" thread!!!

Loved the idea of this thread and wanted to bump it up. I need to go through and see what I have to contribute.

Sent from my SM-T320 using Tapatalk

 

[customtronic]

I'll be posting up some sockets in the next day or two. I'm missing some misc Craftsman 3/8 drive 6-point that I've listed in this thread:
http://www.garagejournal.com/forum/showthread.php?p=5587282&posted=1#post5587282

Thanks in advance for the help.

 

[gonmad54]

Hey guys just thought I would give this a shot. I'm trying to replace some missing sockets from a craftsman set my grandpa gave me for my first socket set.
Missing: 1/4" drive, 11mm, 6 pt, 44408


Sockets I can part with:
Craftsman - 3/8 drive, 19mm, 6 pt, 43549
Craftsman - 3/8 drive, 15mm, 6 pt, 43547
Craftsman - 1/4 drive, 10mm, 6 pt, 34606
Napa USA - 3/8 drive, 18mm, 6 pt, NB618M
Duralast - 1/4 drive, 7mm, 6 pt, 75-705

 

[gdpolk]

I'm just starting out and building my collection. I am a DIY guy and tend to buy mostly US Craftsman stuff but I have several other brands too. I work on foreign and domestic autos, small engines, power tools, and do regular maintenance around the home.

My sockets wishlist includes:

• 1/4", 12pt, short metric singles or module - I have none
• 1/4", 12pt, tall metric socket singles or module - I have none
• 1/2", 6pt, deep SAE singles or module - I have none
• 1/2", 6pt, short metric singles or module - I have none
• Flex head and stubby socket wrenches
• Impact tools (I have nothing here yet)

Extra sockets that I can give away includes:

• --All have been claimed for now. I'll update as more come available.--

PM me if you either have something that can help me or if you want any of what's left on my list to give away.

 

[Derek420]

I'm missing the 20mm from my 1/2 Hornet by Williams set and this is my only metric 1/2 set and there's an empty slot in the rack. Also need 8,9,11,13,14,16,18mm for my 3/8 hornet set not sure if any sizes are skipped for 3/8 but will take any I can find. I got a spare 15mm 3/8 Hornet.
Will list my extras soon as I get a chance to sort right now all my sockets are in multiple boxes as I need a big box to put everything together so waiting on Santa. I got also need a new black case for my sae craftsman -v- socket set it's falling apart from use but all tools are mint. The set consist of a 3/8 qr ratchet with oil hole, 3" extension, 13/16 sp socket, 3/8-1/4 reducer and a mix of 1/4 and 3/8 sockets, the set is small. The box is black plastic and has craftsman in right top corner I think I'd like to stay original but may take newer one if anyone has an extra will pay shipping.

 

[cmanningjr]

The OFFICIAL "FREE SOCKET" thread!

Cleaning out loose extras.

SK 7mm 3/8 Drive Standard - 307

Craftsman 3/8 Drive Sockets-

11mm -g- deep 6pt
17mm in-g deep 6pt
5/8 -v- deep 6pt
16mm in-g deep 12pt
15mm in-g deep 12pt
11/16 in-g deep 12pt

Craftsman 1/4" Drive

11mm in-g deep 6pt
12mm g2 deep 6pt
13mm in-g deep 6pt
13mm g1 deep 6pt
14mm in-g deep 6pt
1/4" in-g deep 6pt
5/16" in-g deep 6pt x3
3/8" in-g deep 6pt
3/8" in-g Shallow 6pt
12mm in-g Shallow 6pt
9/16" G2 Shallow 6pt
1/2" G2 Shallow 6pt
12mm G2 Shallow 6pt


Looking for a few missing pieces prefer Craftsman Inverted G but will consider others.

Want:
Craftsman 3/8" Drive 7/16" & 1/2" Deep 6pt

Shallow 7/8",7/16",3/8" 6pt

Could use 3/8" Drive metric impact sockets too. Any brand

PM me if I have anything you could use..




Sent from my iPhone using Tapatalk

 

[Ty.]

I just got myself a new gearwrench 1/4 rive set and have some stuff that I would like to see someone use instead of sitting in my spare box for a lifetime. its not old craftsman stuff, but I bought it new 15+ years ago from sears.

i have a 1/4 drive 6 point
5.5 mm
6 mm
7 mm
8 mm
9 mm
10 mm
11 mm
12 mm
13 mm
14 mm

7/32
1/4
9/32
5/16
11/32
3/8
7/16
1/2
9/16

I would like to see them go to one home to make my life easy, or trade the whole lot for something that fits in my toolbox that I dont really need. I understand these are not that old or collectible, but they are ready to be put to work if you need them,

 

[Alchymist]

I just got myself a new gearwrench 1/4 rive set and have some stuff that I would like to see someone use instead of sitting in my spare box for a lifetime. its not old craftsman stuff, but I bought it new 15+ years ago from sears.


I would like to see them go to one home to make my life easy, or trade the whole lot for something that fits in my toolbox that I dont really need. I understand these are not that old or collectible, but they are ready to be put to work if you need them,

Couldn't attach pic in PM - they look like this - these are some of the originals. Don't know what sizes I have left....

 

[Toothaker]

Free to a new home. PM me if you are interested. Yes, there are duplicates.

Drive Mark Number Depth Size Points COO
Craftsman
1/2" Drive -V- 47531 Deep 1" 12 USA - sent to uniballer
1/2" Drive -V- 47532 Deep 1 1/16" 12 USA - sent to uniballer
1/2" Drive -G- 47533 Deep 1 1/8" 12 USA - sent to uniballer
1/2" Drive BE Standard 13/16" 12 USA - kept for a local collector
3/8" Drive -V- 43008 Standard 13/16" 6 USA - sent to Alchymist
3/8" Drive -G- 43007 Standard 3/4" 6 USA - sent to Alchymist
3/8" Drive -G- 43006 Standard 11/16" 6 USA - sent to Alchymist
3/8" Drive -V- 43005 Standard 5/8" 6 USA - sent to Alchymist
3/8" Drive 45826 Standard 9/16" 6 - sent to Alchymist
3/8" Drive 45826 Standard 1/2" 6 - sent to Alchymist
3/8" Drive 45824 Standard 7/16" 6 - sent to Alchymist
3/8" Drive 45823 Standard 3/8" 6 - sent to Alchymist

Firestone - made by Plomb
1/2" Drive 222 Standard 11/16" 12 USA - sent to Alchymist
1/2" Drive 222 Standard 3/4" 12 USA - sent to Alchymist
1/2" Drive 222 Standard 13/16" 12 USA - sent to Alchymist
1/2" Drive 222 Standard 7/8" 12 USA - sent to Alchymist
1/2" Drive 222 Standard 15/16" 12 USA - sent to Alchymist
1/2" Drive Standard 1" 12 USA - sent to Alchymist

SK and SK Wayne
3/8" Drive SK Wayne 45116 Standard 1/2" 6 USA - sent to Alchymist
3/8" Drive SK Wayne 45118 Standard 9/16" 6 USA - kept for a local collector
3/8" Drive SK Wayne 45118 Standard 9/16" 6 USA - sent to Alchymist
3/8" Drive SK Wayne 45120 Standard 5/8" 12 USA - sent to Alchymist
3/8" Drive SK 45122 Standard 11/16" 12 USA - kept for a local collector
3/8" Drive SK Wayne 45122 Standard 11/16" 12 USA - sent to Alchymist
3/8" Drive SK Wayne 45124 Standard 3/4" 12 USA - sent to Alchymist
1/4" Drive SK (knurled) 40901 Standard 3/8" 8 USA - sent to Alchymist
1/4" Drive SK (knurled) 40900 Standard 5/16" 8 USA - sent to Alchymist
1/4" Drive SK (knurled) 40988 Standard 1/4" 8 USA - sent to Alchymist
1/4" Drive SK (knurled) 40906 Standard 3/16" 6 USA - sent to Alchymist
1/4" Drive SK (knurled) 40907 Standard 7/32" 6 USA - sent to Alchymist
1/4" Drive SK (knurled) 40909 Standard 9/32" 6 USA - sent to Alchymist
1/4" Drive SK (knurled) 40910 Standard 5/16" 6 USA - sent to Alchymist
1/4" Drive SK (knurled) 40911 Standard 11/32" 12 USA - sent to Alchymist
1/4" Drive SK (knurled) 40912 Standard 3/8" 12 USA - sent to Alchymist

These are all gone as of 2/21/2017.

 

[schaffer970]

Re: The OFFICIAL "FREE SOCKET" thread! : NOT a "wanted" thread!!!

Walden




Sent from my SM-N910P using Tapatalk

 

[racerock]

I would like to see them go to one home to make my life easy, or trade the whole lot for something that fits in my toolbox that I dont really need. I understand these are not that old or collectible, but they are ready to be put to work if you need them,

Just sent a PM, it may have been sent twice by mistake.

 

[pajibson]

great! you guys ****. Now I have to catalog my extras to post up on here. Like i dont have enough to do. thanks.

 

[Jamie V]

Re: The OFFICIAL "FREE SOCKET" thread! : NOT a "wanted" thread!!!

Does anyone have a 9/16 semi deep socket they would sell/part with? I need just the 9/16 no other size.

 

[GForceJunky]

Re: The OFFICIAL "FREE SOCKET" thread! : NOT a "wanted" thread!!!

Does anyone have a 9/16 semi deep socket they would sell/part with? I need just the 9/16 no other size.

Probably want to mention if you're looking for a specific drive or not.

 

[Jamie V]

Re: The OFFICIAL "FREE SOCKET" thread! : NOT a "wanted" thread!!!

I think they only came in 3/8 drive but if not that's what I need.

 

[TheoMott]

Wish list:
Looking to fill the gaps in my SK 3/8 Metric Deep set

Need:
9
16
18
Will be happy to pay for them. Thank you

 

[doan]

Wish list (all 3/8 drive)

13/16 shallow chrome
7/8 shallow chrome

5/16 deep chrome
7/8 deep chrome

16 mm shallow impact
13/16 shallow impact
7/8 shallow impact

16 mm deep impact
13/16 deep impact
7/8 deep impact

Most of mine are USA craftsman or craftsman industrial. But I'm not that picky. I would prefer USA craftsman for the chrome sockets. I'm happy to pay for the sockets and shipping.

Email is the fastest - [email protected]

Thanks,

David

 

[BMack37]

Looking for a 3/8" drive, 13/16" deep impact socket(6 point), preferably Snap on but I'd consider other high end sockets. Willing to pay, but also have a few loose Matco impact hex and Matco chrome torx. I also have a few loose chrome sockets from other lesser manufacturers like Kobalt.

 

[Dumber than lumber]

So, is this thread really about "orphan sockets". Not understanding the the use of "free" in the title.
Thanks

 

[schaffer970]

Re: The OFFICIAL "FREE SOCKET" thread! : NOT a "wanted" thread!!!

I am looking for a Walden Worcester 219. It is a 19/32 6 point 1/2 inch socket. Thanks for looking.

Sent from my SM-N910P using Tapatalk

 

[toolmutt]

So, is this thread really about "orphan sockets". Not understanding the the use of "free" in the title.
Thanks

The thread began as a place for members to offer their extras, for free. It seems to have progressed to a thread for members to post their needs.

 

[AFD256]

This is an awesome idea, I'll have to go thru my extras now and post them up

 

[Jp267]

Re: The OFFICIAL "FREE SOCKET" thread! : NOT a "wanted" thread!!!

Does anyone have a 9/16 semi deep socket they would sell/part with? I need just the 9/16 no other size.

I have a 9/16 Ford Triton deep magnetic spark plug socket or non spark plug socket I could part with have a few. Think they're 3/8 drive. If you haven't found one already PM me your info and what you want and I can send it USPS priority in a day or two.

Edit: And it looks like I broke the rules already. Sorry! Feel free to delete and I'll PM requester directly.

 

[B Hansen]

After recently piecing together a couple used/NOS socket sets I can really appreciate a thread like this! Here's what I have:

All are in used condition but no major rust or dings, etc:

Craftsman V 1/2" Drive 15/16" 12pt Shallow Chrome
Craftsman G2 USA 44334 3/8" Drive 9/16" 12pt Shallow Chrome
Craftsman G USA 43494 1/4" Drive 9/32" 6pt Shallow Chrome
Craftsman G USA 43495 1/4" Drive 5/16" 6pt Shallow Chrome
Stanley Workmaster USA 86-267 11/16" 12pt Shallow Chrome

 

[gregaz]

Anyone have a T25 Torx bit? Amazon has 15 packs and such, lol - I only need one!

 

[a075923]

An old set I've had a long time....over the years missing a couple and some of these were not in my set, but I wonder if they may have been in a larger set??

Powr-Kraft 100 1/2 inch drive 6pt 9/16, 11/16, 19/32, 21/32, 25/32 and 15/16

Thanks

 

[nicks78camaro]

Looking for one socket, happy to pay fair price shipped to 15129:

Craftsman USA made, 10mm, 1/2" drive, 6 point, deepwell

 

[SantaFeTrailer]

Just ran across this thread. Great idea. I have the following:

1/2" Drive

3/8 adapter Craftsman

3/8 Drive

3/8 6 point Snap On (a little rusty)
3/8 12 point Craftsman
7/16 12 point deep Craftsman
1/2 6 point deep Great Neck
1/2 12 point deep Craftsman
5/8 spark plug socket Taiwan
3/4 12 point Craftsman

6mm hex S-K (a little rusty)
6mm hex Craftsman
T47 Torx MTools (China)

11mm 6 point Craftsman
11 mm 6 point deep Craftsman
12mmm 6 point deep Ace
13mm 6 point Craftsman
13 mm 6 point deep Craftsman
13 mm 6 point deep Craftsman
14mm 6 point semi-deep Husky
15mm 6 point deep Craftsman

1/4 Drive

3/16 6 point Great Neck
7/16 6 point Taiwan
7/16 6 point Ace
1/2 12 point Husky

4mm 6 point Great Neck
4.5mm 6 point Great Neck
6mm 6 point Great Neck
6mm 6 point Craftsman
9mm 6 point Great Neck

Looking for:

1/2" 21mm Impact socket

 

[srtek]

Anybody have a matco bp10m6 10mm impact socket 6 point 3/8 drive

Thanks!

 

[goodinblack]

I need a 1/4 drive 8mm standard depth.

USA or Taiwan

No matter what brand

 

[jimmyin3D]

i need a 16MM Deep impact socket 3/8 drive any brand.