OP
jeffmoss26
Well-known member
...you don't have one in each of the colors already?!
The Orange Snap-on tools **** thread!
- Thread starter jeffmoss26
- Start date
canuckian
Well-known member
nope...only want one anyways. my dealer's been a little slow with the promo stuff and shipping one of those up here is stupidly expensive.
teamarctic
Well-known member
Heres my latest purchase. radiator hose pick and a pocket screwdriver.
Challenger_2MBT
Well-known member
Snap-on KRSC43 roll-cart. Just picked up yesterday.
powerstroker
Well-known member
Is the top that armour edge stuff?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Challenger_2MBT
Well-known member
Yes sir. I didn't know it was a option with this cart until my dealer told me. I like it better than the stainless steel top.
powerstroker
Well-known member
I like it a lot. I've got a mat over my stainless steel top on my toolbox now. It's just too delicate and I'm too crazy about my tools. That looks like a really good option.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Snap-on KRSC43 roll-cart. Just picked up yesterday.
Nice cart. My dealer has one in candy apple red with black trim. Looks amazing. I'm probably going to get it in green but he told me to wait until they have a special on carts
Challenger_2MBT
Well-known member
Bought mine on special. Was $300 off list price. Glad Snap-on released a cart with the sliding spilt top.
refried
Well-known member
3/8 Deep and Shallow
I was using the 9/16 Deep
I was using the 9/16 Deep
bodyguy16
Well-known member
3/8 Deep and Shallow
I was using the 9/16 Deep
I like how the paint stays in the etching once worn off.
Sent from my SGH-I747M using Tapatalk
Snap-on KRSC43 roll-cart. Just picked up yesterday.
Does that top slid apart in the middle? I though they sold one where it slid back or flipped up. A middle split in orange is very tempting.. Great looking box.
EDIT oops sorry just saw your other post about it. For some reason I'm not finding that cart on their website?
Sent from my iPhone using Tapatalk
Last edited:
Challenger_2MBT
Well-known member
Yes, it has a spilt sliding top. I think they only list the version with the stainless steel spilt top on the new website. Which I don't like at all.
powerstroker
Well-known member
New orange today. Picks and finally my wire strippers. He has the bogo hammer and pry bars on the truck in orange right now. It took lots of will power to walk off without them.
Sent from my iPhone using Tapatalk
powerstroker
Well-known member
Couldn't resist it!
Sent from my iPhone using Tapatalk
powerstroker
Well-known member
The orange gets me everytime.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
wkderf
Well-known member
I knew there would be a perfect thread to post this pic:
Last edited:
Brians VWss
Well-known member
Tejaas
Well-known member
Snagged this yesterday for a $5 bill.
~Tejaas~
WTB: Snap-On Orange Hard Handle SDD6 & SSDP63 in Very Good Condition!
~Tejaas~
WTB: Snap-On Orange Hard Handle SDD6 & SSDP63 in Very Good Condition!
Mxjr12
Well-known member
These have been posted elsewhere before, but:
I'll get pictures of the rest (soft grip, hammers, pliers, new ratchets) and add them later.
What are the handled tools in the second pic and what sizes are the feeler gauges
shockwave
Well-known member
What is the part number for the deeper gauge set and the short flex head that is a great collection do u use all of them?
DynoDale
Well-known member
Aren't they all handled tools? Prybars, awls, ratchets, ratcheting wrenches, breaker bar, screwdriver, nutdriverFeeler gauges: Post 59 of this thread
powerstroker
Well-known member
The family is growing.
Sent from my iPhone using Tapatalk
Matt_C
Well-known member
I only have these little two in orange 
Matt_C
Well-known member
Fresh clip tools off the truck
Oh you ****! I have the 177 in black, and I had a 161 in black, but lost it a while back - I'd love to have them both in orange!!!
Matt_C
Well-known member
My newest orange addition - ok, so not BRAND new, but new to me
I've got a PH4 on the way too (older, black hard handle, and now I want a matching orange handle to the above one for it. If this turns into a new OCD orange obsession, I'm blaming you guys....
I've got a PH4 on the way too (older, black hard handle, and now I want a matching orange handle to the above one for it. If this turns into a new OCD orange obsession, I'm blaming you guys....
Matt_C
Well-known member
Replacement orange handle arrived today from the US
Swapped out the old black handle from the PH4
Ok, so it's got the wrong part number on, but it matches the PH3 now
Swapped out the old black handle from the PH4
Ok, so it's got the wrong part number on, but it matches the PH3 now
what's the bottom one?
The bottom one is a NOS USA made chisel/punch holder made by KD. Got it off eBay for $10.95 shipped. In the pic on eBay it looked red, like 99% of the KD made ones are. Needless to say I was happy as a clam finding out it was orange when I opened the box.
wkderf
Well-known member
am I the only one who thinks the shade of orange in the new instinct handles has too much red in it?
You're not the only one. I wish it was brighter.
Snap-on KRSC43 roll-cart. Just picked up yesterday.
I'm getting ready to pull the trigger on one of these. I noticed that there are different options for drawer sizes. Does it come standard with the 8"bottom drawer and 5, 4"drawers?
wkderf
Well-known member
keeping this thread going:
despite how red they may look in the photo - the screwdrivers & mini sets are indeed Snap-on orange instinct handles. there seems to be a QC issue in terms of the coloring. hopefully they can work it out.
despite how red they may look in the photo - the screwdrivers & mini sets are indeed Snap-on orange instinct handles. there seems to be a QC issue in terms of the coloring. hopefully they can work it out.
Matt_C
Well-known member
Love that ^ Nice shadowing!
And stupidly jealous of the two trim tools bottom right - I have both those in black, and I'd love to have them in orange!
And stupidly jealous of the two trim tools bottom right - I have both those in black, and I'd love to have them in orange!
wkderf
Well-known member
for me it was absolutely crucial that I have these tools in orange. after losing 3 of them due to either myself or others leaving them in cars during disassembly, I wanted to make sure they were as visible as possible so i dont lose em again!
the orange handled trim tools should be available currently from your dealer. they were in their monthly catalog not too long ago (a few months).
Part numbers for reference are:
A161B and A177A
Brownsfan
Well-known member
Yea me too. They blend into dark interiors and trunks. I have at least bought and lost 3 of each over the years. Much easier to see in orange.