The tool sell off.. another round part 2

[justinmc]

Figured I'd start a seperate thread.. just a few more things. See my other thread as well.

Lot 49
JC Penney torque wrench.. 3830 15-100ft lbs 3/8" drive.. this one had initials on it. I think someone here was putting together a set of old Penney's tools. This one would be a nice little crowning piece. $15

Lot 50
Mac screwdrivers.. PKR8 flat head, PZD28A long #2 posi.. shaft was a little tweaked but has been straightened, PN2SA stubby flat head, P201XA #1 phillips.. the tip is tweaked on this. but not broken.. could be warranty if you have a good Mac guy. As a lot $15

Lot 51
Matco cotter pin tool or twisted hook.. made in usa orange handle matco logo is pretty well gone off the handle.
Unknown (this is Cornwell or Mac) Made in USA ratcheting style screwdriver handle with phillips driver only..
SOLD ddrewyor

Lot 52
KD 2079 hydraulic valve tappet removal tool.. (SJD $34) $20

Lot 53
Spec Tool or Skewdriver brand 2 position pistol grip type ratcheting screwdriver.. the cover for the gears is a little loose (just the plastic cover) but otherwise in good shape.. missing a few bits but in the plastic case. (SJD $30) $15

Lot 54
Mac tools ratcheting offset bit driver wrenches.. FRT202TRM (Torx 20 with a 1/4" hex on the other end for holding other types of bits) & FRT27IGN (Torx 27 with 1/4" hex on the other end torx bit is in good shape but looks like it was replaced with a shorter one for tight access?).. SOLD ddrewyor

Lot 55
Buffalo (Taiwan) impact driver with bits in metal case..
SOLD DaMan

Lot 56
Mac MHTS2 3.5" dia inspection mirror.. no cracks, scratches, etc in glass.. mirror head seems a little loose but could be tightened up ($15 new)
Matco HT5DIS 25" long magnetic pickup tool..
SOLD ddrewyor

Check out the other thread.. PM me if you see something you want or post up. First come first serve. Prices are OBO plus ship. USPS priority mail flat rate boxes are my preferred method. Thanks

 

[64merc]

Justin, for some reason I can't see the picture for Lot 51 and you have the wrong picture for Lot 56.

Question: on Lot 54, can you change out the bits or are you stuck with the included torx bits?

Thanks

 

[caper]

pm sent on torque wrench

 

[justinmc]

Justin, for some reason I can't see the picture for Lot 51 and you have the wrong picture for Lot 56.

Question: on Lot 54, can you change out the bits or are you stuck with the included torx bits?

Thanks

Errr thanks for the heads up.. I thought I checked this but guess I didn't! Fixed now. hit refresh if it still doesn't look right.

On the torx bits I can't tell that they are changeable.. but I'll check em again. However the opposite end will hold any 1/4" bit (screwdriver, torx, allen, etc).

 

[ddrewyor]

PM sent on 56, 55, 54, 51 (ratchet)

Dave
________
Half-Baked

 

[cruiser808]

Lot 53 is a fantastic deal! I have the Proto version, I paid $40 new and it was 1/2 off at the time. Does the job very well.

 

[justinmc]

Edited.... removed photos of sold items and listed them as SOLD to reduce some of the clutter. Thanks!