Things My Father Left Behind

[tooljunkie4]

Location

Central Maryland

There's a lot here that fits into this category. I'll eventually get several things posted. May even transfer this to an older thread that has more space already baked in. For now, I am focusing on larger items. Space hogs that are in the way.

I'd prefer not to have to ship these items.

Electronic means of payment are not an option. Cash and (very specifically) USPS money orders have worked well in the past.


1) Sun Distributor Machine
SOLD



2) United Delco Stool w/Drawer
SOLD



3) SARGENT 44V Door Closer - NOS
$200

Comes with arm, wrench, and valve adjusting key.









4) FMC Model 1040 (Bubble) Wheel Balancer
SOLD



5) Homelite Super EZ Chainsaws (Q.2)
GONE

 

[tooljunkie4]

6) 1968 Chevrolet Chevelle Hubcaps - Full Set - 14"
$100

Two of these look pretty good. The two others (foreground) have issues with the condition of their plastic centers.





7) Robinair R12 Charging Cylinder
$60








8) Harbor Freight Wheel Dollies - Set of (4)
$80

These held up a Corvair in one of the garages for over a decade. Function is fine. Condition is dusty.





9) Easco Quarter-Drive Set
SOLD



10) T-Slot Hold Down Set
$40

Too large for the slots on the machines that are here. I have had them nearly 20 years, and have never been able to make use of them. Seems to be a common Asian-made set, but with a small handful of extra pieces included.





11) Standard Vise
$50

Marked 3-1/2. Very dry. Lines up well. Also, very dry. Needs to be cleaned and greased.

 

[tooljunkie4]

12) Surface Plate
SOLD



13) Parts Bin Cubes (Q.3)
SOLD



14) Wide Parts Cabinet
SOLD

 

[tooljunkie4]

15) TRW Parts Cabinet
SOLD


16) P&D Ignition Parts Case
GONE



17) Transmission Jack
$150

Harbor Freight / Pittsburgh Brand. 800 LB capacity. Purchased and used once years ago to attempt removal of the T-5 from the J10. Sat indoors, getting leaked on by a Corvair transaxle for a couple of years after that. Well-preserved.

 

[tooljunkie4]

18) Old Car Audio Components
GONE

 

[tooljunkie4]

19) Kerosene Heaters (Radiant With and Without Fan)

I have (5) kerosene heaters to part with. Four are equipped with a fan.


Model Information:

With Fan:

HeatMate HMRF-1140 (Q.3)
American Wick AWRF-1140 (Q.1)

$150 ea.


Radiant Heat Only:

HeatMate HMHR-1101 (Q.1)

$100.

Purchase all of the heaters together, and I will throw in the kerosene can and (4) replacement wick kits.

Local pickup only.











20) Propane Heater - Forced Air

I purchased this two winters ago. Used it for one task. Found that it wasn't right for either the space or the task. Sealed it back up to wait for it to become useful. That day hasn't come, so it is time for it to move along.

$110

 

[tooljunkie4]

21) Kerosene Torpedo - Forced Air

Not working properly at all. This thing is as old as dirt. Used to set my coveralls on fire with the thing while working with my father in the 80s. It sat on a shelf for a couple decades. Had a cracked, rotted-out fuel line and only sort of warmed up, so I purchased the full tune-up kit including a pump rebuild kit, a new fuel line, a fresh spark plug and a few other bits - and the damned thing won't light dependably. It sprays kerosene like a champ, but it doesn't light dependably.

I quit. Too much else is going on right now. This thing is free. Shipping is not possible.







22) Magnesium Bull Floats & Handles - Marshalltown

Already broken-in.

$300 together.

 

[tooljunkie4]

23) W24x76 I-Beams (Q.4)

Purchased many years ago for a mammoth project which never took shape.

Based on dimensions, these appear to be W24x76.

Steel Beam Sizes Chart | SkyCiv

Use this tool to get the beam sizes of regular shapes, including I beam Sizes, H beam sizes and HSS sizes. The dimensions are displayed in a clean table.

skyciv.com

W24x76 Dimensions | Beam Dimensions

Properties and dimensions of the W24x76 section.

beamdimensions.com

https://sections.app/us/W24x76

Beams - West Central Steel

Learn more about our steel beam solutions for your project.

www.wcsteel.com

Approximate length of each beam is 36.5 feet.
Flange width is approximately 9".
Depth is approximately 24".
Flange thickness is approximately 11/16".
Web thickness is approximately 7/16".

Total weight for the four beams together should be somewhere in the neighborhood of 11090 lbs.

You will need an extremely large truck and help in order to be able to lift and move these intact. The last three photos below show the rig that was used to deposit them here in 1992.

Delivery is not available.
$4000

If you pay the asking price and take all four, I will throw in other structural steel that is here. I-beams, angle iron, rebar, flat steel, T-channel, and more. Most is fairly long. It is time to close out this chapter.

 

[tooljunkie4]

24) Mohawk A-7 Lift

Model No. A-7
Serial No. 89091404
DOM 1989

7000 LB. Capacity

Used. Acquired from a shop in NYC in roughly 2006. Stored on a shelf indoors ever since.

Includes posts, motor, pump, arms, lines, and owner's literature (both physical and digital).

$2500. Bring two sasquatch and a stout truck. Cannot deliver.







25) AC PCV Valve Cabinet / Display

Just another small piece of AC memorabilia.

$50





26) Baldor 333B Buffer w/Accessories

$600

 

[tooljunkie4]

27) Rolling Shop Stools

Two available.

$10 ea.






28) Asphalt Repair Products
GONE

 

[tooljunkie4]

29) Harbor Freight Truck Bed Crane
SOLD


30) SUN Diagnostic Literature and Manuals

$60

 

[tooljunkie4]

31) Chevrolet Sign

May be difficult to ship.

$50





32) MOOG Parts Display - Sign Board

$30

 

[tooljunkie4]

33) Automotive Tire Tubes - New

Quantity (2).

Can be shipped. Local pickup may be more cost-effective.

$20 together. Must take both.

 

[tooljunkie4]

34) 10" Bench Grinder Wheel

$50


Marked:

Red Hill Grinding Wheel Corp. of Pennsburg, PA
Order No. 36691
REF45-822804
A144-04BF-2
3600 RPM


Diameter: 10-1/8"
Arbor: 2"
Wheel Width: 2-1/8"


This has been sitting, buried, in an overstuffed garage for the past 30+ years.

I do not have the machine needed to drive this wheel, and so it must go.