Titan Micro Ratchet Set

[alinc100]

Hi All ,
Production Tool Supply has A 2 piece Titan Offset Micro ratchet with a "free"
61 piece bit set on sale for $24.75.

I was there picking up a replacement point for a general No.79 center punch I found over the weekend at a flea market and they had them on the counter so of course I was hooked and bought the set.

http://www.pts-tools.com/cgi/CGP2SRIM?PMITEM=KP8211203A&PARTPG=&PAMENU=&PAHDID=000000073970979&PARDID=378949016509088




I am not sure what shipping costs would be but it looks like a fair deal for the set based upon their separate item pricing.
Now to figure out if these go in with the ratchets and sockets or in with the screwdrivers....decisions,decisions,decisions....

 

[Qrazy]

Thanks! Nice looking set. I picked this up along with this Sunex set http://www.pts-tools.com/cgi/CGP2SR...PAHDID=000000073973782&PARDID=350697362027455
I actually had a little cheapy version strip out on me this past weekend. So I needed to replace it, so I figured I would pick up both and see which works best for me.

 

[quattroJoe]

That little 1/4" ratchet is surprisingly good, and normally sells for $10 by itself. Not a bad deal, I wouldn't mind grabbing the bit ratchet if I came across one.

 

[Qualitytools]

Site is down can't get on

 

[Nades84]

I believe Autozone sells the titan set for $19. I have the 1/4" square drive only, and its a steal for a $10. Especially working in aviation.

 

[nicksnothereman]

They (titan) sell the bit sets including a bit holder socket) for around 10 bucks in various places if you don't want to spend this money. Not the same thing but if you use bits it's an option. Of course the other manufacturers sell bit holders as well but I'm not sure of the price probably around 5+ bucks depending on mfg.

 

[tadwolfe]

I believe Autozone sells the titan set for $19. I have the 1/4" square drive only, and its a steal for a $10. Especially working in aviation.

Yes that is where I pick up mine.....nice to have foe small places


Sent from my iPad using Tapatalk

 

[ADSR]

Make sure you guys lube them up with ATF or Superlube Spray. They come dry as a bone from the factory.

 

[LDR814]

I'm looking at some other items on PST (3/8 ratchets) and think they have good deals. I was going to register and place an order, but it looks like PST is commercial account only? Anyone else purchase from them?

Edit - I figured it out. They have a "guest" option which I didn't see from the first try.

 

[ishiboo]

I bought mine months ago and just used it for the first time yesterday... had a door knob come loose and couldn't find my right angle screwdriver. Won't ever reach for it again - the micro bit ratchet is the way to go!