You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Today's flea Market finds.
- Thread starter 930dreamer
- Start date
r_olson_06
Well-known member
Re: Today's fleaarket finds.
Very nice s-k plug set. And has the ell handle which is hard to come by good job
Sent from my XT1030 using Tapatalk
Very nice s-k plug set. And has the ell handle which is hard to come by good job
Sent from my XT1030 using Tapatalk
r_olson_06
Well-known member
Re: Today's fleaarket finds.
Sent from my XT1030 using Tapatalk
What brand is the ell 1/2 drive end?Nice Plvmb selection, S-K, Blue point.
Sent from my XT1030 using Tapatalk
OP
Re: Today's fleaarket finds.
Craftsman
What brand is the ell 1/2 drive end?
Sent from my XT1030 using Tapatalk
Craftsman
paulm12
Well-known member
Re: Today's fleaarket finds.
nice finds. Liking the spark plug set.
nice finds. Liking the spark plug set.
OP
Re: Today's fleaarket finds.
It's actually this set;
No. 4810 1/2-Drive Deep Socket Set-
Fig. 28 shows a 1/2-drive S-K No. 4810 socket set, a collection of nine 408xx-series deep sockets in a metal box. The set model number is given by a faded sticker on the side (see inset), and the 1939 S-K catalog lists a very similar No. 4808 set of eight deep sockets.
The socket models and sizes are, from the left, 40818 (9/16), 40820 (5/8), 40822 (11/16), 40824 (3/4), 40826 (13/16), 40828 (7/8), 40830 (15/16), 40832 (1 Inch), and 40836 (1-1/8). The sockets all have a cross-bar hole for use with the Ell handle included in the set. At the time, deep sockets were intended primarily for spark-plug removal and were usually provided with a hole for use with a cross-bar.
The S-K 1/2-drive deep sockets probably went through the same generational changes as the shallow sockets; in particular, later versions of the deep sockets dropped the cross-bar hole and added drive-end recesses. Although the relative timing of these changes is not known, the 1957 catalog shows that the cross-bar holes had disappeared by that time
It's actually this set;
No. 4810 1/2-Drive Deep Socket Set-
Fig. 28 shows a 1/2-drive S-K No. 4810 socket set, a collection of nine 408xx-series deep sockets in a metal box. The set model number is given by a faded sticker on the side (see inset), and the 1939 S-K catalog lists a very similar No. 4808 set of eight deep sockets.
The socket models and sizes are, from the left, 40818 (9/16), 40820 (5/8), 40822 (11/16), 40824 (3/4), 40826 (13/16), 40828 (7/8), 40830 (15/16), 40832 (1 Inch), and 40836 (1-1/8). The sockets all have a cross-bar hole for use with the Ell handle included in the set. At the time, deep sockets were intended primarily for spark-plug removal and were usually provided with a hole for use with a cross-bar.
The S-K 1/2-drive deep sockets probably went through the same generational changes as the shallow sockets; in particular, later versions of the deep sockets dropped the cross-bar hole and added drive-end recesses. Although the relative timing of these changes is not known, the 1957 catalog shows that the cross-bar holes had disappeared by that time
jabberwoki
Well-known member
Re: Today's fleaarket finds.
Wow that's a good haul.
Wow that's a good haul.
northwoods
Well-known member
Re: Today's fleaarket finds.
Plomb beautiful!
Plomb beautiful!
Karl's Garage
Well-known member
- Joined
- Mar 13, 2016
- Messages
- 100
Those were a good find
Richard Cranium
Well-known member
I sure like the s&k sockets