To avoid these ads, REGISTER NOW!

Today's motion security lights really ****

adamant118

Active member
Joined
Feb 24, 2015
Messages
39
I guess you get what you pay for. I picked up a set from Lowe's and it's the third one so far that I had to replace. The motion sensors go, they turn on in daylight.3cc61e0e9dab4f1db3769ff4ba043d24.jpg

Sent from my SM-G930T using Tapatalk
 

Attachments

  • 3cc61e0e9dab4f1db3769ff4ba043d24.jpg
    3cc61e0e9dab4f1db3769ff4ba043d24.jpg
    217.8 KB · Views: 0
To avoid these ads, REGISTER NOW!

nsula_country

Well-known member
Joined
May 23, 2013
Messages
1,534
Location
Northwestern Louisiana
Agreed. The assembled units ****. I don't even think the +$100 units at box stores and supply houses are worth a damn.

Been looking to roll my own with 3 hole cover, lamp holders, screw in LED floods and a good quality motion sensor. Still searching for the motion sensor. From what I have researched, can build for $40-$50 each.

CT
 

Falcon67

Well-known member
Joined
Jun 11, 2009
Messages
18,371
Location
Merkel, TX
I love how they tend to cycle on/off all night should you lose power after dark. And they continue to do the on/off thing until sun is well up.
 

cybrdyke

Well-known member
Joined
Sep 9, 2014
Messages
3,444
Location
USA
There is no manufacturer called Utilitech. It's just a con game by Lowes. Home Depot does the same, as do all the big box stores.
Residential Outdoor lighting is probably the worst category when it comes to cheap, flimsy, fall-apart-in-your-hands products. And motion sensors make it even worse. I wouldn't buy anything in this type of product from any of the big box stores or from anyone online, including Amazon. It's all junk.
The solution is to pony-up some money, unfortunately. I use commercial products for outdoor lighting on residential buildings. They cost more. But they're brighter, much better built, and they work. You'll find these products at your local electrical supplier. RAB, Cooper, Philips, Hubbell....those are the brand names.
Even with those products, as well as they work...the outdoor motion sensors still ****. There just isn't a good one. Doesn't exist. The best thing to do is scrap the notion of an outdoor motion sensor. You can use a photocell instead, if that helps. With the low power that an LED fixture uses, you can leave it on all night long and not worry about running up your power bill. Or you can use a timer.
Good luck,
CD
 

prostreetamx

Well-known member
Joined
Dec 19, 2016
Messages
222
Location
Las Vegas
The hot sun here destroys motion sensors pretty quick. They rarely work for over a year even if I put them in some shade.
 

jpinca

Well-known member
Joined
Sep 23, 2011
Messages
225
Location
NorCal
I installed the the Ring Motion floodlight a few weeks ago and so far so good. I have three Ring Products to date and have been generally pleased with them. I hope they have long term reliability.

white-dc13060e0ccac5c553e165b7266b847b.jpg
 

aka Larry

Well-known member
Joined
May 2, 2012
Messages
8,043
Location
Eastern, NC
Even with those products, as well as they work...the outdoor motion sensors still ****. There just isn't a good one. Doesn't exist. The best thing to do is scrap the notion of an outdoor motion sensor. You can use a photocell instead, if that helps. With the low power that an LED fixture uses, you can leave it on all night long and not worry about running up your power bill.

Agreed! I've BTDT with motion sensors and I too never had one worth a damn. I finally gave up and went with LEDs and a photocell. My current setup has been flawless for the last 4 years.
 

grantw

Well-known member
Joined
Nov 10, 2016
Messages
249
Location
Bay Area, CA
I installed the the Ring Motion floodlight a few weeks ago and so far so good. I have three Ring Products to date and have been generally pleased with them. I hope they have long term reliability.

[giant image]


One of my neighbors put one of these up. The floods are ON ALL NIGHT and facing the street. I am dis-liking that neighbor very quickly every time I go by.
 
To avoid these ads, REGISTER NOW!

reader2580

Well-known member
Joined
Dec 31, 2014
Messages
14,524
Location
Minneapolis, MN
I guess I have been lucky with two big box store LED lights with motion sensors. One is almost three years old and the other is 18 months old and they still work fine. They turn on at night and don't come on during the day. I looked at RAB, but I could not justify the cost.

I had bigger issues with a halogen motion light at my previous house. It worked for a year or two and failed. I left it like that for almost 10 years and then replaced it before I sold the house.
 

openwheelracing88

Well-known member
Joined
Nov 10, 2015
Messages
266
I got one from Costco (wired version) and it works "relatively" well. I am hoping someone else other than Ring integrates a security camera into this solution. It is the perfect location for a camera. I don't like Ring because it charges a monthly fee. Yes yes I am being cheap here, but I hate it when they nickle and dime you. I got 3 Arlo Pro and 2 Arlo Q for the very reason that they provide free cloud storage and local storage is an option.
 

reader2580

Well-known member
Joined
Dec 31, 2014
Messages
14,524
Location
Minneapolis, MN
What happens to that "free" cloud service when the manufacturer goes out of business? Does the camera become a door stop because the service is no longer available? I know we hate to pay service fees, but it helps ensure the service stays running.

I bought some solar inverters from a manufacturer that went out of business. They offered a free service that allowed users to view their solar production online. The free service ceased to function when the manufacturer went bankrupt. Somebody started a $50 a year pay service to do the same thing. The inverters at least still function without the Internet service.
 

Brian_WK

Well-known member
Joined
Jun 30, 2015
Messages
1,177
Location
NE South Dakota
Heath zenith are my favorite soon far. I'm going on 3 years with all types of weather. Mine has the sensor outdoors and the rest of the electronics are inside.

Brian
 

Stuart in MN

Well-known member
Joined
Sep 8, 2005
Messages
23,106
Location
Minneapolis
I"ve had good luck with RAB lighting. They have a bunch of other options besides the standard floodlight that are much more aesthetically pleasing.
 

CoogarXR

Well-known member
Joined
Jan 11, 2016
Messages
6,853
Location
Ohio
At my old house, I bought the "expensive" ones (like $80+), and they died in less than a year. I probably bought 5 replacements while I lived there.

At my new place, I just bought the very cheapest one they sold, figuring "why bother with the expensive junk if I have to buy them so often". Go figure, I bought two of the $14 ones 7 years ago and they still work perfectly. I think they are Zenith.

When I was still mad about it, I though about using the auxiliary "alarm" contacts on my DVR to trigger a relay that would turn on a standard floodlight. This way it would use the motion sensing of my cameras instead of a PIR sensor. Still a thought if anybody is so motivated, lol.
 
Last edited:

openwheelracing88

Well-known member
Joined
Nov 10, 2015
Messages
266
What happens to that "free" cloud service when the manufacturer goes out of business? Does the camera become a door stop because the service is no longer available? I know we hate to pay service fees, but it helps ensure the service stays running.

I bought some solar inverters from a manufacturer that went out of business. They offered a free service that allowed users to view their solar production online. The free service ceased to function when the manufacturer went bankrupt. Somebody started a $50 a year pay service to do the same thing. The inverters at least still function without the Internet service.

local storage is an option via USB ports on the base which has a built in siren.
Fact is, manufacturers need to start include local storage for security cameras. Micro SD cards and USB sticks are perfect for this application.
 

grantw

Well-known member
Joined
Nov 10, 2016
Messages
249
Location
Bay Area, CA
local storage is an option via USB ports on the base which has a built in siren.
Fact is, manufacturers need to start include local storage for security cameras. Micro SD cards and USB sticks are perfect for this application.

Not exactly. microSD cards have a relatively limited amount of write cycles, especially when considering 20Mbps video streams for HD feeds. Sure, it would be great as a local storage option when the network NVR is not online, but for 24x7x365, it's not the best option.

Car dashcams start having high sdcard failure rates after ~1 year of nonstop recording. I mean, it does vary based on internal wear-leveling and whatnot, but for a high-use overwriting recording cycle, SD/USB flash isn't the best option for long term reliability.
 
To avoid these ads, REGISTER NOW!
Top Bottom