SIVART0506
Well-known member
AFTER SPENDING WAY TOO MUCH TIME TAKING OVER 200 PICTURES I AM TOO DUMB TO UPLOAD AS AN ATTACHMENT. SON OF A B---H!!!
Best I can do for now is to send anyone who is interested in anything the full zip file of all 200 pictures, email me at [email protected].
SNAP ON INVENTORY, NO PICTURES YET
****Please contact me through [email protected]**** (I’m a technology tard, so this is the most reliable way. Will be taking pictures of everything tomorrow; please let me know about any specific items or aspects you would like photos of. Regrettably have lots of full/partial socket sets listed of FEEBAY, username husslinc-consignments
All prices are OBO, am willing to do some discounting for large orders.
** I accept paypal, and ship USPS flat rate priority w/delivery confirmation unless you request other shipping options, I charge what it costs to ship, no more, no less**
WRENCHES
METRIC
OEXM120- pretty nice $10
OEXM190B- pretty nice $10
OEXM18- almost new $10
OEX160- pretty nice, R.R. on open end $8
S6112- pretty nice, minor toolbox wear $25
S5911- really nice $25
SAE
OEX300B- OK, but chunk out of open end $15
OEX18A- decent, not great $10
OEX-200- nicks on open end $8
M1318- really nice, almost looks like it was re-chromed $30
B1467A- great, with minor toolbox wear $18
B1458C- almost no use $30
XDH78- 7/32 end shows minor wear $20
RANDOM
1650- 18” Pry bar,(I think) tarnished, etc… pointy end chipped a little $25
BT11- Looks re-chromed, shows very little use $14
CJ66-19- Re-chromed? Looks really good $20
B1461- Dirty but good condition $15
131A- Great shape, hardly used $28
SOCKETS, ETC
LAW120 A- Great condition hex $30
SA18A- Good condition $15
FA6L- 5-6” long hex, good condition $5
GLA62A- Nice condition $18
F310- flathead, nice condition $4
A-15- pretty good shape $12
A 26- pretty good, minor rust inside $4
F261- OK condition $7
SW-121- Pretty nice $8
A2- little rust inside $7
CPT110A- nice $15
IMM160- little bit of rust $6
SIMF180,140,120- bunch of grease, gunk inside, some rust $10
FA4A,4.5A,5A- nice, but 5A is clogged by a broken off piece $15
FS181- OK $4
FSM141- looks like it was never used $8
FS141- very little use, nice $4
FS121- nice $5
FSM91-nice $5
FSM81- nice $5
F181- used, OK $5
F141- nice $6
F101- no use, very minor rust $5
FTSM6B- good condition $10
TLE80A,70A,60A,50A,40A- virtually no use, minor rust maybe,(hard to tell) $12
FX1- 1 older, 1 newer- minor rust $5 each
SETS
A57Q- bushing remover/inserter set, includes 46 pieces and I think is complete,(not sure) minor rust on 5 or 6 pieces, includes paperwork and case. # scratched into inside of case lid. $120
CG500- stud remover set, appears to be complete, comes with KRA-150 box stamped ’81. $70
RTD42- Rethread set missing 5 pieces,(1 bar, 1 tap, 3 dies) bit dirty but threads all look good. $60
BIG AND WEIRD
CJ85-1 w/CJ83-3- dirty but great condition $40
CJ125-6 w/CJ125A- light rust, but good $50
CJ117A1 w/CJ117B2- minor rust, but nice $35
CJH5B101 w/’nice’ 607 attached-great shape ?????
CJ118-1- dirty with little bit of rust ??????
A91C- 2 piece strap wrench, 1 piece rusty, both dirty $20
ALSO HAVE 6 or 7 3/8" and 1/2" extensions of different sizes
SX-10 $12
SX10 $12
FX1(2) $5 each
FX 6 $8
FX11A $10
FX 18 $15
FX24 $25
Other sets
Blue Point TF28D $40
Snap On steering wheel puller and and lock plate depressor set PB72 $80
Best I can do for now is to send anyone who is interested in anything the full zip file of all 200 pictures, email me at [email protected].
SNAP ON INVENTORY, NO PICTURES YET
****Please contact me through [email protected]**** (I’m a technology tard, so this is the most reliable way. Will be taking pictures of everything tomorrow; please let me know about any specific items or aspects you would like photos of. Regrettably have lots of full/partial socket sets listed of FEEBAY, username husslinc-consignments
All prices are OBO, am willing to do some discounting for large orders.
** I accept paypal, and ship USPS flat rate priority w/delivery confirmation unless you request other shipping options, I charge what it costs to ship, no more, no less**
WRENCHES
METRIC
OEXM120- pretty nice $10
OEXM190B- pretty nice $10
OEXM18- almost new $10
OEX160- pretty nice, R.R. on open end $8
S6112- pretty nice, minor toolbox wear $25
S5911- really nice $25
SAE
OEX300B- OK, but chunk out of open end $15
OEX18A- decent, not great $10
OEX-200- nicks on open end $8
M1318- really nice, almost looks like it was re-chromed $30
B1467A- great, with minor toolbox wear $18
B1458C- almost no use $30
XDH78- 7/32 end shows minor wear $20
RANDOM
1650- 18” Pry bar,(I think) tarnished, etc… pointy end chipped a little $25
BT11- Looks re-chromed, shows very little use $14
CJ66-19- Re-chromed? Looks really good $20
B1461- Dirty but good condition $15
131A- Great shape, hardly used $28
SOCKETS, ETC
LAW120 A- Great condition hex $30
SA18A- Good condition $15
FA6L- 5-6” long hex, good condition $5
GLA62A- Nice condition $18
F310- flathead, nice condition $4
A-15- pretty good shape $12
A 26- pretty good, minor rust inside $4
F261- OK condition $7
SW-121- Pretty nice $8
A2- little rust inside $7
CPT110A- nice $15
IMM160- little bit of rust $6
SIMF180,140,120- bunch of grease, gunk inside, some rust $10
FA4A,4.5A,5A- nice, but 5A is clogged by a broken off piece $15
FS181- OK $4
FSM141- looks like it was never used $8
FS141- very little use, nice $4
FS121- nice $5
FSM91-nice $5
FSM81- nice $5
F181- used, OK $5
F141- nice $6
F101- no use, very minor rust $5
FTSM6B- good condition $10
TLE80A,70A,60A,50A,40A- virtually no use, minor rust maybe,(hard to tell) $12
FX1- 1 older, 1 newer- minor rust $5 each
SETS
A57Q- bushing remover/inserter set, includes 46 pieces and I think is complete,(not sure) minor rust on 5 or 6 pieces, includes paperwork and case. # scratched into inside of case lid. $120
CG500- stud remover set, appears to be complete, comes with KRA-150 box stamped ’81. $70
RTD42- Rethread set missing 5 pieces,(1 bar, 1 tap, 3 dies) bit dirty but threads all look good. $60
BIG AND WEIRD
CJ85-1 w/CJ83-3- dirty but great condition $40
CJ125-6 w/CJ125A- light rust, but good $50
CJ117A1 w/CJ117B2- minor rust, but nice $35
CJH5B101 w/’nice’ 607 attached-great shape ?????
CJ118-1- dirty with little bit of rust ??????
A91C- 2 piece strap wrench, 1 piece rusty, both dirty $20
ALSO HAVE 6 or 7 3/8" and 1/2" extensions of different sizes
SX-10 $12
SX10 $12
FX1(2) $5 each
FX 6 $8
FX11A $10
FX 18 $15
FX24 $25
Other sets
Blue Point TF28D $40
Snap On steering wheel puller and and lock plate depressor set PB72 $80
Last edited:
