Tool brand identification? 1 1/16" 12pt socket

[jerseykat1]

Can anyone identify this tool brand I have few of these sockets.

Sent from my Nexus 6P using Tapatalk

 

[ChevyEFI]

The inverse diamond knurl rings a bell, but I'm not good at this game.

 

[RedVise]

Is it a hex drive ? That would help narrow it down.
try Alloy Arifacts, it looks like an Indestro-ish socket.

Brian

 

[kwoswalt99]

The way the broaching doesn't go all the way down is familiar as well.

 

[woody 73]

Not able to see enough op can you see if it has a small star on the outside of the socket, the old dirt on the socket has me at a disadvantage.

 

[BDT/NWMN]

Wards PowerCraft.....I have a set of those that were old when my Uncle gave them to me back around 1960... It came with an open ratchet with a female drive. You flipped the ratchet over to reverse directions.. The extension for the set had two male ends; with one end fitting into the ratchet, and the socket on the other end.

Still have the green hip toolbox with tray that the set came in. The set included x/32 sockets, as well as eight points..

 

[jerseykat1]

Is it a hex drive ? That would help narrow it down.
try Alloy Arifacts, it looks like an Indestro-ish socket.

Brian

Some are hex drive some are 1/2" square drive. No name markings.

Sent from my Nexus 6P using Tapatalk

 

[jerseykat1]

Wards PowerCraft.....I have a set of those that were old when my Uncle gave them to me back around 1960... It came with an open ratchet with a female drive. You flipped the ratchet over to reverse directions.. The extension for the set had two male ends; with one end fitting into the ratchet, and the socket on the other end.

Still have the green hip toolbox with tray that the set came in. The set included x/32 sockets, as well as eight points..

Your description is so much like what I have. Except I'm missing the ratchet. But i do have the double male extensions you describe.

Sent from my Nexus 6P using Tapatalk