To avoid these ads, REGISTER NOW!

Toolbox theft prevention

lukeau

New member
Joined
Feb 11, 2012
Messages
1
Hi this is my first post I just purchased a snap on roller cab and was wondering what you can do to stop it from being wheeled straight on to a ute and stolen.thanks for the help
 
To avoid these ads, REGISTER NOW!

Dubbydoo

Well-known member
Joined
Jan 22, 2011
Messages
275
I chain mine to alot of big things air compressor,10k generator and other tool boxes that I dont move around
 

jhelrey

Well-known member
Joined
Sep 15, 2010
Messages
7,238
Location
MN
I removed the handle because I wanted it tight into the corner of my workbench. I drilled holes in my work bench where the bolt holes for the handle goes. I put in a few bolts. I figured it will sure slow them down when they try to move it and it is bolted the bench.
 

Rasquachismo

Member
Joined
Sep 2, 2010
Messages
9
I second taking the wheels off the box once it's where you want it. If possible you can use a forklift and put it on blocks to keep it off the concrete. It's not going to keep your tools from being stolen but it will prevent someone from rolling the box out of your shop onto a flatbed or trailer.

A friend once told me about a marina in Ft. Lauderdale that had been robbed of all its tools. The mechanics later removed their casters to prevent their boxes from being rolled away. All you can do is make it more difficult for thieves.
 

xj31

Well-known member
Joined
May 6, 2011
Messages
290
I used to work in a shop in an " interesting " neighborhood. I had tools stolen out of my box when I was at the parts counter. I had a car stolen while I was working on it. I just jacked up one corner of my box with a floor jack, took one wheel off and put wood under it. I was hoping someone tried to steal it cuz I figured if they pulled on the handle hard enough, the box would fall on them.
 

gatewaysysop

Well-known member
Joined
Nov 11, 2008
Messages
3,288
Location
Arizona
Hi this is my first post I just purchased a snap on roller cab and was wondering what you can do to stop it from being wheeled straight on to a ute and stolen.thanks for the help

At home or in the shop/workplace? If the former, best defense is to not advertise what you have to all the cruisers and passers by. Don't show it off to people that visit, don't have your garage door up all the time, don't try to impress the neighbors, etc. Lots of **** gets stolen because people make themselves targets. Much safer to just appear as any another house on the block, rather than be widely known as the house with a garage full of expensive tools and Snappy boxes. :dunno:
 
Last edited:
To avoid these ads, REGISTER NOW!

redwrench60

Well-known member
Joined
Sep 10, 2011
Messages
6,062
Location
East Tennessee
At home or in the shop/workplace? If the former, best defensive is to not advertise what you have to all the cruisers and passers by. Don't show it off to people that visit, don't have your garage door up all the time, don't try to impress the neighbors, etc. Lots of **** gets stolen because people make themselves targets. Much safer to just appear as any another house on the block, rather than be widely known as the house with a garage full of expensive tools and Snappy boxes. :dunno:

Yup, what he said. It's almost better for things to be hidden from sight and unlocked than locked in plain view.
 

geologist

Well-known member
Joined
Dec 14, 2011
Messages
5,326
Tilt-alarms can be quite useful if you box allows you to properly conceal them.
 

JASTECH

Well-known member
Joined
Oct 21, 2009
Messages
2,671
Location
Gering, NE
Drill holes in concrete and anchor box via chain/lock. I posted in other thread I bought a Tool Box Alarm by Doberman Security still in package from HD for 20.00. That might be a way for you, don't know the decible level yet.
 

crewchief888

Well-known member
Joined
Dec 3, 2009
Messages
13,741
Location
NW indiana
At home or in the shop/workplace? If the former, best defensive is to not advertise what you have to all the cruisers and passers by. Don't show it off to people that visit, don't have your garage door up all the time, don't try to impress the neighbors, etc. Lots of **** gets stolen because people make themselves targets. Much safer to just appear as any another house on the block, rather than be widely known as the house with a garage full of expensive tools and Snappy boxes. :dunno:

this is probably the best advise.
whenever i move boxes or tools around, i usually throw a tarp over things until i can get backed into the garage.
i dont keep toolboxes against the back wall of the garage, against a sidewall, my off road truck stays on that side of the garage, blocking them from view, and with the truck there, no way to get out the door with them.
i keep the chopsaw covered with an old towel, welder covered by it's own dirty cover, grinders, ect are in a closed metal storage cabinet above the workbench.

i've never had a stranger get closer than 25 feet or so to the garage, the dog has them by then.

everything else toolwise is blocked from view by the truck.

:beer:
 

Attachments

  • guard dog.jpg
    guard dog.jpg
    147.1 KB · Views: 28

gatewaysysop

Well-known member
Joined
Nov 11, 2008
Messages
3,288
Location
Arizona
Just make sure it's properly insured, and stop worrying.

I agree, but to a point. Some things can't be replaced with an insurance check, other things have sentimental value, etc. Everyone has to decide for themselves at what point they're being paranoid vs. prudent and it depends on everyone's own situation (where you live, just how much you care about your tools, etc.).

That said, no matter much one is insured for, I still don't think it hurts to be careful about advertising your goods and/or making it easy to walk away with them. For me, at least, no matter the size of the insurance check or how easy it is to replace my belongings, I'd much prefer not getting rolled in the first place. :dunno:

I say be as careful as you think is practical. If caution isn't practical for whatever reason, perhaps balance it with more insurance. :thumbup:
 

Skyline

Well-known member
Joined
Nov 11, 2008
Messages
3,586
I agree, but to a point. Some things can't be replaced with an insurance check, other things have sentimental value, etc. Everyone has to decide for themselves at what point they're being paranoid vs. prudent and it depends on everyone's own situation (where you live, just how much you care about your tools, etc.).

That said, no matter much one is insured for, I still don't think it hurts to be careful about advertising your goods and/or making it easy to walk away with them. For me, at least, no matter the size of the insurance check or how easy it is to replace my belongings, I'd much prefer not getting rolled in the first place. :dunno:

I say be as careful as you think is practical. If caution isn't practical for whatever reason, perhaps balance it with more insurance. :thumbup:

Agreed. "An ounce of prevention is worth a pound of cure." To me, tools have no sentimental value. I'd rather lose all my tools to theft than a few inexpensive pieces of art that I bought with my wife while on our honeymoon. Unfortunately, with the exception of some really nice garden tools, most of the tools I got from my dad when he died were junk, and went in the trash. But I guess I can see how someone could get sentimental about certain tools. I'd just as soon have new replacements for all mine, and they are insured for replacement value.
 
To avoid these ads, REGISTER NOW!
Top Bottom