tools for sale...december

[rsanter]

craftsman sockets
these are vintage sochets that are better than the current offerings
the deeps are marked V
the shallows are marked VV with a few of them being marked V
the added square drive socket is marked BE
$50 shipped for the whole lot
these will ship in a flate rate box so anything else you buy with these will get an approprite discount due to the savings in shipping
View media item 6497View media item 6493View media item 6496View media item 6494View media item 6495View media item 6498
====================================================

craftsman speeders
$25 shipped both........sold....................
View media item 6499
====================================================

PLOMB
speeder and extension
both in good shape, extension has been cleaned up, the speeder has some surface rust and a little gunk on it and could use a little cleaning
$25 shipped
View media item 6501====================================================

extensions
SK 1/2 drive, a little surface rust
SK 3/8 drive, good shape
P&C 1/4 drive, good shape
$22 shipped
View media item 6500
====================================================

snap on ratcheting wrenches
plus a 'extra' or bonus made by 'wild'
$55 shipped......SOLD......
View media item 6380
====================================================

snap on MT302 remote starter
good shape, bottom boots are not original, they were replaced because the originals were melted a bit
$28 shipped
View media item 6382====================================================

FOX VALLEY timing light
good shape, original packing and owners manual/paperwork
this is a nice robust unit, reminds me of the older snap ons
works on 6v and 12v
$28 shipped
View media item 6381View media item 6383
====================================================

snap on test light
good shape other than the little black retainer part being broken
this is a 'heyco' retainer and is available. I have some here but not the right size or I would have replaced it. it is usable as is and stays together, just not as well as it should if the retainer was not broken
$24 shipped
View media item 6385====================================================

small wrench set
the ones on the left are 'OXWALL'
the ones on the right are assorted brands including INDESTRO and NEW BRITTEN
$12 shipped
View media item 6384
====================================================

THORSEN box (with a couple of sockets as a bonus)
$10 plus shipping (this will not fit in a flat rate box)
View media item 6503View media item 6504View media item 6505
====================================================

top row
VLCHECK 1/2 drive
1'' 15/16 7/8 13/16 3/4 11/16 1/2 7/16
$14 shipped........sold........

bottom row
GLOBEMASTERS 1/2drive
19mm 14mm 13mm 12mm 10mm 9mm
$10 shipped

$20 shipped for all the sockets pictured
View media item 6507====================================================

vintage snap on tune up kit
good condition
$65 shipped.........sold..........
View media item 5590View media item 5591
====================================================

snap on swivel sockets
TMUS101 5/16
TMUS121 3/8
excellent shape, no markings
$25 shipped for both
View media item 6267
===================================================

snap on screwdrivers
SSD6
SSD2 (new blade)
SSD1
SSD204
the little screwdriver says 'made in usa' but dosent have a name
looks like some of the old bundus small screwdrivers I have
$20 shipped..............sold..........................
View media item 6266
====================================================

MAC toolbox
dated 1969
good condition other than they could use a repaint to make them look really nice
I have the MAC emblem for the bottom box, the top box is missing the emblem but is marked MAC on the back of the box
$250 takes them both
View media item 6508View media item 6508
===================================================

will accept reasonable offers, will discount for multiple items purchased if they can be shipped together

bob

====================================================

 

[JoeD]

PM sent on ratcheting wrenches

 

[2drx4]

PM sent about the Cman socket set.

 

[1stwarrior95]

extensions
SK 1/2 drive, a little surface rust
SK 3/8 drive, good shape
P&C 1/4 drive, good shape
$22 shipped

How long is that P&C 1/4" drive extension? Would ya sell it seperate?

 

[rsanter]

extensions
SK 1/2 drive, a little surface rust
SK 3/8 drive, good shape
P&C 1/4 drive, good shape
$22 shipped

How long is that P&C 1/4" drive extension? Would ya sell it seperate?

the P&C is 14'' long
I could seperate it out, the only problem becomes the value of the item verses the value of the shipping
I may actually have a couple other P&C stuff if you collect those

bob

 

[eborcim]

PM sent on Vlchek set.

 

[mrholeshot]

As far as the timing light goes it is the same internals as the Snap-On light of the same area. Fox Vally was building timing lights for Snap-On, Mac(even externally identical) Sears and just about everybody else. It's an excellant unit. I wish you were closer, I'd be all over those vintage MAC boxes. Very similar to my first set but mine had just switched to the Square pull handles instead of the half moon ones. I really like it

 

[1stwarrior95]

the P&C is 14'' long
I could seperate it out, the only problem becomes the value of the item verses the value of the shipping
I may actually have a couple other P&C stuff if you collect those

bob

Yea, I was thinking the same thing about shipping after I posted. To tell the truth, I'm not even sure what P&C stands for... LOL
It's just that I could use some 1/4"dr long extensions and I have no room for any more 1/2" or 3/8" ones. Ya have any other 1/4"?

 

[rsanter]

Yea, I was thinking the same thing about shipping after I posted. To tell the truth, I'm not even sure what P&C stands for... LOL
It's just that I could use some 1/4"dr long extensions and I have no room for any more 1/2" or 3/8" ones. Ya have any other 1/4"?

I have some 1/4 sockets and allen drives
also have a couple of Cman 1/4 ratchets

bob

 

[rsanter]

Yea, I was thinking the same thing about shipping after I posted. To tell the truth, I'm not even sure what P&C stands for... LOL
It's just that I could use some 1/4"dr long extensions and I have no room for any more 1/2" or 3/8" ones. Ya have any other 1/4"?

the only other P&C thing I have found was the 1/2 drive 15/16 shallow socket

bob

 

[JoeD]

Payment sent on Ratcheting Wrenches.

 

[bigdummy30]

ill take the snap on screwdrivers if you take paypal...pm the address.

 

[rsanter]

ill take the snap on screwdrivers if you take paypal...pm the address.

my paypal is [email protected]
thanks

bob

 

[blue dog]

Do you have the keys for the tool boxes? do all the drawers work well?

 

[Bruce Lancaster]

I can use the Snap-on tune up kit. PM on its way.

 

[rsanter]

Do you have the keys for the tool boxes? do all the drawers work well?

yes I have the keys
most of the drawers work very well but a couple of the thin drawers on the botton are a bit sticky.
when I got it the box was very dirty so I have taken all the drawres out and pressure washed the box and the drawers
the drawer glides still need cleaned a bit and lubed but all the parts appeared to be in good shape. I am confident that a little wire brushing in the slides and fresh lube will have all of them working well

bob

 

[wrenchr]

If we were closer I'd be all over that tool box.

 

[bigdummy30]

my paypal is [email protected]
thanks

bob

paypal sent,thanks

 

[rsanter]

If we were closer I'd be all over that tool box.

yea, I suspect the shipping may exceed the purchase price

bob

 

[db130]

PM sent on plomb speeder+extension+3pc extensions

 

[rsanter]

offers???

bob