Tools from the old world

[american lockpicker]

I must say Ultgar your pictures never cease to amaze me.

I picked these up today.

Also as I was about to leave the shop I noticed this.

It has light rust on the top so its probably old. Its made in France(only reason I got it) and was under $2. Any idea on who makes it? Also I remember seeing some file brushes from France at a local hardware store a few years ago but when I went back and to get one someone had been in earlier that week and bought all of them according to the cashier. I would love to have one if they still make them.

 

[demographic]

Instead of having a handle they attach to a ratchet or extension.

I have one like that made by Sykes Pickavant, its OK but one problem I have had with it is that its quite big and numb and as its generally exhaust studs I need it for it gets in the way of its self.

Its good if you have the space to get round things but less so if the space is tight.

 

[Monte]

For "grab and go" tools and sets...Tanos boxes, still made in Germany. Sortimo makes something similar which is starting to show up in the Bosch blue color in the tool stores here in the states. SD

nice T-loc systainers

It has light rust on the top so its probably old. Its made in France(only reason I got it) and was under $2. Any idea on who makes it? Also I remember seeing some file brushes from France at a local hardware store a few years ago but when I went back and to get one someone had been in earlier that week and bought all of them according to the cashier. I would love to have one if they still make them.

i dont know, only non german wire brush manufacturer i know is www.jaz.es from spain. You could ask the store owner and ask where he source them from.

 

[servito]

@monte
i love knipex cobra plier...one of my favorite...can u give me one of ur plier as a gift???

what ur opinion about knipex and NWS??

I'm not Monte, nor a pro, but maybe another opnion would be good; I have a pair of NWS pliers (universal pliers and side cut pliers, both VDE) and another side cut pliers from Knipex (and have used Knipex universal pliers, too). And I like far more NWS handles because they're thicker and the rubber on NWS has mooooore grip than on Knipex. NWS universal pliers seem to cut better and easier than the Knipex I have (and the other one I used). Another thing is that NWS pliers seem more lubricated, because they are easier to open/close, they glide better.

 

[Monte]

I'm not Monte, nor a pro, but maybe another opnion would be good; I have a pair of NWS pliers (universal pliers and side cut pliers, both VDE) and another side cut pliers from Knipex (and have used Knipex universal pliers, too). And I like far more NWS handles because they're thicker and the rubber on NWS has mooooore grip than on Knipex. NWS universal pliers seem to cut better and easier than the Knipex I have (and the other one I used). Another thing is that NWS pliers seem more lubricated, because they are easier to open/close, they glide better.

what he said

 

[garfunkle24]

Between the two, I prefer the plain vinyl handles on my Knipex. In fact, I just ordered some more NWS pliers with the vinyl handles. To each their own!

 

[Moose-LandTran]

Between the two, I prefer the plain vinyl handles on my Knipex. In fact, I just ordered some more NWS pliers with the vinyl handles. To each their own!

I much prefer plain vinyl too. Just ordered 4 pairs of Knipex with them, and one pair of NWS without. (Due to availability.) And a loooooooad of Stahlwille too.

And timing tools for a stupid 3-cylinder Vauxhall.

 

[garfunkle24]

And timing tools for a stupid 3-cylinder Vauxhall.

Could be worse............

















Could be me.

 

[Moose-LandTran]

Could be worse............

















Could be me.

Doesn't bear thinking about..

 

[bart1]

...And a loooooooad of Stahlwille too.

And timing tools for a stupid 3-cylinder Vauxhall.

I'd like to se pics of those. The Stahlwille, not the Vauxhall...

Who makes Stahlwille pliers? I was surprised to hear this, but apparently Wiha makes their own.

 

[bart1]

hey! i'm in this thread now! got these pliers last week.

You have screwdrivers you can post, as well

 

[Moose-LandTran]

I'd like to se pics of those. The Stahlwille, not the Vauxhall...

Will do, when it arrives in a few days.

Who makes Stahlwille pliers? I was surprised to hear this, but apparently Wiha makes their own.

I believe Stahlwille make them.

 

[ultgar]

 

[mrtools]

Mine was "broken" (actually burned ) too

Too much metal dust inside the cable drum so it started to burn one day and melted

Fire in the hole!!!!!!!!!
U need to spend more time to service/clean ur electrical appliance not just concentrate ur tools or buy a dust proof cable drum
BTW: U have awesome tools collection
ok

but i only have the old design and only the 250mm version. Is that ok for you ?
Yes im looking old skool design & like 250mm size not too big & not too small anything from Germany is good for me


good


you can buy both. I like the old thick NWS handles because they´re very comfortable and sidecutters cut very good. They don´t have a very large selection like Knipex, but the most important pliers are also available from NWS. If you have a chance to try them out why not

If my wallet is thick...
I like both Thank for ur explanation im very appreciate

I'm not Monte, nor a pro, but maybe another opnion would be good; I have a pair of NWS pliers (universal pliers and side cut pliers, both VDE) and another side cut pliers from Knipex (and have used Knipex universal pliers, too). And I like far more NWS handles because they're thicker and the rubber on NWS has mooooore grip than on Knipex. NWS universal pliers seem to cut better and easier than the Knipex I have (and the other one I used). Another thing is that NWS pliers seem more lubricated, because they are easier to open/close, they glide better.

@servito
Thank for share ur experience about KNIPEX & NWS stuff

 

[ipv7net]

Hello, first post here on GJ. Having read all the (very) interesting post in this thread now it's time to contribute with some pictures of my tools ..

Bought this 1/2" set on ebay for very little money (25 eu), used (and abused), from a military surplus seller:

<a href="http://www.flickr.com/photos/31231773@N02/5428668486/" title="P2083158 by ipv7net, on Flickr"><img src="http://farm6.static.flickr.com/5134/5428668486_4b69601675.jpg" width="500" height="375" alt="P2083158" /></a>

reversible ratchet, long and short extension, sliding T handle, flexible handle, universal joint, 10-11-12-13-14-16-17-19-20-22-24-27-30-32 socket.

<a href="http://www.flickr.com/photos/31231773@N02/5428648774/" title="P2082999 by ipv7net, on Flickr"><img src="http://farm6.static.flickr.com/5258/5428648774_4978e65a9f.jpg" width="500" height="375" alt="P2082999" /></a>

<a href="http://www.flickr.com/photos/31231773@N02/5428047703/" title="P2083009 by ipv7net, on Flickr"><img src="http://farm6.static.flickr.com/5251/5428047703_c648db118c.jpg" width="500" height="375" alt="P2083009" /></a>

<a href="http://www.flickr.com/photos/31231773@N02/5428651526/" title="P2083016 by ipv7net, on Flickr"><img src="http://farm6.static.flickr.com/5174/5428651526_310e63a869.jpg" width="500" height="375" alt="P2083016" /></a>

<a href="http://www.flickr.com/photos/31231773@N02/5428652440/" title="P2083017 by ipv7net, on Flickr"><img src="http://farm6.static.flickr.com/5096/5428652440_ea1f87f506.jpg" width="500" height="375" alt="P2083017" /></a>

<a href="http://www.flickr.com/photos/31231773@N02/5428650592/" title="P2083014 by ipv7net, on Flickr"><img src="http://farm6.static.flickr.com/5053/5428650592_213ecd0734.jpg" width="500" height="375" alt="P2083014" /></a>

reversible ratchet by ISI, made in Germany, has seen better days but it's working fine.

sliding T handle and short extension is made by Elora, long extension by Hazet

<a href="http://www.flickr.com/photos/31231773@N02/5428655990/" title="P2083038 by ipv7net, on Flickr"><img src="http://farm6.static.flickr.com/5018/5428655990_e5a6e11696.jpg" width="500" height="375" alt="P2083038" /></a>

universal joint by Saltus, flexible handle ISI.

The socket is a mix, Elora, Matador, ISI, Acesa (made in Spain), there's an Alko socket (USA), one by Schmole (Germany):

<a href="http://www.flickr.com/photos/31231773@N02/5428059653/" title="P2083087 by ipv7net, on Flickr"><img src="http://farm6.static.flickr.com/5013/5428059653_845b7c5ccf.jpg" width="500" height="375" alt="P2083087" /></a>

and one by Rheidco (made in Germany ? i don't know)

<a href="http://www.flickr.com/photos/31231773@N02/5428064739/" title="P2083101 by ipv7net, on Flickr"><img src="http://farm6.static.flickr.com/5292/5428064739_461b5ce600.jpg" width="500" height="375" alt="P2083101" /></a>

From the same seller i got a set of wrenches, mixed maker and well used but for a very low price, i will post some photos later.

Now for new and shiny things .. Beta 3/8 flexible head reversible ratchet :

<a href="http://www.flickr.com/photos/31231773@N02/5428678958/" title="P2083295 by ipv7net, on Flickr"><img src="http://farm6.static.flickr.com/5175/5428678958_dc0584275e.jpg" width="500" height="375" alt="P2083295" /></a>

<a href="http://www.flickr.com/photos/31231773@N02/5428679670/" title="P2083297 by ipv7net, on Flickr"><img src="http://farm6.static.flickr.com/5214/5428679670_70071f9be5.jpg" width="500" height="375" alt="P2083297" /></a>

<a href="http://www.flickr.com/photos/31231773@N02/5428078907/" title="P2083305 by ipv7net, on Flickr"><img src="http://farm6.static.flickr.com/5298/5428078907_9516ff0edb.jpg" width="500" height="375" alt="P2083305" /></a>

<a href="http://www.flickr.com/photos/31231773@N02/5428080203/" title="P2083306 by ipv7net, on Flickr"><img src="http://farm6.static.flickr.com/5291/5428080203_4bd26215a1.jpg" width="500" height="375" alt="P2083306" /></a>

<a href="http://www.flickr.com/photos/31231773@N02/5428682694/" title="P2083309 by ipv7net, on Flickr"><img src="http://farm6.static.flickr.com/5017/5428682694_b54354ebc7.jpg" width="500" height="375" alt="P2083309" /></a>

<a href="http://www.flickr.com/photos/31231773@N02/5428683480/" title="P2083311 by ipv7net, on Flickr"><img src="http://farm6.static.flickr.com/5297/5428683480_70e8747892.jpg" width="500" height="375" alt="P2083311" /></a>

<a href="http://www.flickr.com/photos/31231773@N02/5428684332/" title="P2083319 by ipv7net, on Flickr"><img src="http://farm6.static.flickr.com/5052/5428684332_7e219e9156.jpg" width="500" height="375" alt="P2083319" /></a>

I'm sure more Beta tools will follow.

Got this some days ago, magnetic bit holder from Wiha, standard, T-handle, and long (very long, 30cm) version

<a href="http://www.flickr.com/photos/31231773@N02/5410400490/" title="P2022810 by ipv7net, on Flickr"><img src="http://farm6.static.flickr.com/5211/5410400490_c82fc63ca3.jpg" width="500" height="375" alt="P2022810" /></a>

<a href="http://www.flickr.com/photos/31231773@N02/5409792427/" title="P2022833 by ipv7net, on Flickr"><img src="http://farm5.static.flickr.com/4090/5409792427_26878dbc99.jpg" width="500" height="375" alt="P2022833" /></a>

<a href="http://www.flickr.com/photos/31231773@N02/5409791805/" title="P2022831 by ipv7net, on Flickr"><img src="http://farm5.static.flickr.com/4077/5409791805_7f7fa1da08.jpg" width="500" height="375" alt="P2022831" /></a>

<a href="http://www.flickr.com/photos/31231773@N02/5409793199/" title="P2022835 by ipv7net, on Flickr"><img src="http://farm6.static.flickr.com/5178/5409793199_3ed82d58be.jpg" width="500" height="375" alt="P2022835" /></a>

More photos will follow ..

 

[AficanToolman]

what he said

I'm not Monte, nor a pro, but maybe another opnion would be good; I have a pair of NWS pliers (universal pliers and side cut pliers, both VDE) and another side cut pliers from Knipex (and have used Knipex universal pliers, too). And I like far more NWS handles because they're thicker and the rubber on NWS has mooooore grip than on Knipex. NWS universal pliers seem to cut better and easier than the Knipex I have (and the other one I used). Another thing is that NWS pliers seem more lubricated, because they are easier to open/close, they glide better.

The only NWS I have been able to get are the VDE ones.

I find the handles feel much nicer and softer on the hand than the Knipex VDE ones, but im always scared im going to damage them because my mind say they are soft. The knipex ones feel as if you can throw it into your toolbox a million times without damaging them, while i always gently put the NWS ones away. It may all just be in my mind.

As for lubrication, I only have 1 knipex that isnt as smooth or easy to open as the NWS. All the others ae equal to them. The new Knipex ones do see to have a bit of grease coming out of the hinges though.


One thing I found with 3 NWS combination pliers was a number of small flakes of what looked like coating material coming off the "teeth" of the pliers during first use. Wasnt the teeth themselves, more like little bits of the "matt chrome coating" coming off. Did Not affect the looks or functionality at all.

The Matt chrome of the NWS is also better when working in harsh sun light that the bright Knipex chrome that reflects the light into your eyes.


All said, I like both
Just wish NWS was easier to get online in the USA. if amazon.com kept them I would buy lots

 

[ipv7net]

Sunday morning, trip to "Leroy-Merlin" store hoping to buy some Usag 325 Torx screwdriver (trying to complete my set) got a T25, a T27, surprise, the needed T30 is out of stock, but wait, i'm seeing Wiha on the shelf ? that's strange, it's branded "Leroy Merlin" ...

<a href="http://www.flickr.com/photos/31231773@N02/5428090451/" title="P2083355 by ipv7net, on Flickr"><img src="http://farm6.static.flickr.com/5100/5428090451_b18c5e28ee.jpg" width="500" height="375" alt="P2083355" /></a>

looks familiar ?

<a href="http://www.flickr.com/photos/31231773@N02/5428695762/" title="P2083360 by ipv7net, on Flickr"><img src="http://farm6.static.flickr.com/5132/5428695762_bcf94382b7.jpg" width="500" height="375" alt="P2083360" /></a>

<a href="http://www.flickr.com/photos/31231773@N02/5429025608/" title="P2083367 by ipv7net, on Flickr"><img src="http://farm6.static.flickr.com/5259/5429025608_9b79244f6a.jpg" width="500" height="375" alt="P2083367" /></a>

So now Leroy-Merlin sell rebranded Wiha screwdriver ?

Some other screwdriver ..

Wera craftform 900

<a href="http://www.flickr.com/photos/31231773@N02/5428672838/" title="P2083262 by ipv7net, on Flickr"><img src="http://farm6.static.flickr.com/5095/5428672838_a867393180.jpg" width="500" height="375" alt="P2083262" /></a>

<a href="http://www.flickr.com/photos/31231773@N02/5428073337/" title="P2083273 by ipv7net, on Flickr"><img src="http://farm6.static.flickr.com/5058/5428073337_39fa473156.jpg" width="500" height="375" alt="P2083273" /></a>

Felo rebranded by Lux (9.90 euro, i had to have this)

<a href="http://www.flickr.com/photos/31231773@N02/5428074627/" title="P2083277 by ipv7net, on Flickr"><img src="http://farm6.static.flickr.com/5133/5428074627_fa95ea404a.jpg" width="500" height="375" alt="P2083277" /></a>

<a href="http://www.flickr.com/photos/31231773@N02/5428678188/" title="P2083292 by ipv7net, on Flickr"><img src="http://farm6.static.flickr.com/5298/5428678188_f1699291c0.jpg" width="500" height="375" alt="P2083292" /></a>

Waiting to buy a Beta 1/4" ratchet i got this little cute ratchet by Lux

<a href="http://www.flickr.com/photos/31231773@N02/5428083435/" title="P2083326 by ipv7net, on Flickr"><img src="http://farm6.static.flickr.com/5095/5428083435_6188919619.jpg" width="500" height="375" alt="P2083326" /></a>

with an extension, a universal joint, and a flex handle, just in case ..

<a href="http://www.flickr.com/photos/31231773@N02/5428686610/" title="P2083328 by ipv7net, on Flickr"><img src="http://farm6.static.flickr.com/5058/5428686610_3cc54b7d4a.jpg" width="500" height="375" alt="P2083328" /></a>

<a href="http://www.flickr.com/photos/31231773@N02/5428085485/" title="P2083331 by ipv7net, on Flickr"><img src="http://farm6.static.flickr.com/5131/5428085485_417aac812f.jpg" width="500" height="375" alt="P2083331" /></a>

<a href="http://www.flickr.com/photos/31231773@N02/5428086351/" title="P2083333 by ipv7net, on Flickr"><img src="http://farm6.static.flickr.com/5174/5428086351_4826e9aa00.jpg" width="500" height="375" alt="P2083333" /></a>

<a href="http://www.flickr.com/photos/31231773@N02/5428689060/" title="P2083336 by ipv7net, on Flickr"><img src="http://farm6.static.flickr.com/5214/5428689060_0bd36919bc.jpg" width="500" height="375" alt="P2083336" /></a>

there's no COO, so i don't know if it's Germany made, or a chinese product, but it feels surprisingly good

Everything together ..

<a href="http://www.flickr.com/photos/31231773@N02/5428088351/" title="P2083352 by ipv7net, on Flickr"><img src="http://farm6.static.flickr.com/5173/5428088351_c26550255a.jpg" width="500" height="375" alt="P2083352" /></a>

not that bad ..

 

[servito]

Sunday morning, trip to "Leroy-Merlin" store hoping to buy some Usag 325 Torx screwdriver (trying to complete my set) got a T25, a T27, surprise, the needed T30 is out of stock, but wait, i'm seeing Wiha on the shelf ? that's strange, it's branded "Leroy Merlin" ...

Ohhhh, Wiha screw drivers in Leroy-Merlin; where do you live ipv7net?
In my Leroy-Merlin they only have their brand "Dexter" and Stanley.
And they usually don't open at sundays
Cheers.

 

[Monte]

I will clean + inspect all electrical appliances + power tools as from now
Otherwise the next time something starts to burn it might the angle grinder in my hands

ok as soon as the teeth of my Knipex pliers are worn you can have them

Hello, first post here on GJ. Having read all the (very) interesting post in this thread now it's time to contribute with some pictures of my tools ..

Welcome to the forum !

and one by Rheidco (made in Germany ? i don't know)

yes, old company, once belonged to the power tool manufacturer Metabo - But the brand don´t exist anymore.

Now for new and shiny things .. Beta 3/8 flexible head reversible ratchet :

nice !
btw. Beta ratchet......

More photos will follow ..

yes please !

Sunday morning, trip to "Leroy-Merlin" store hoping to buy some Usag 325 Torx screwdriver (trying to complete my set) got a T25, a T27, surprise, the needed T30 is out of stock, but wait, i'm seeing Wiha on the shelf ? that's strange, it's branded "Leroy Merlin" ...

Nice ! Cool !! Never saw them with the "Leroy..." brand !
PS: You´re from france ?

there's no COO, so i don't know if it's Germany made, or a chinese product, but it feels surprisingly good

i guess China or Taiwan.





Picked up some stone drill bits today:

Old world brand but made in....

...the new world

Alpen www.alpenmaykestag.com

 

[ipv7net]

Ohhhh, Wiha screw drivers in Leroy-Merlin; where do you live ipv7net?
In my Leroy-Merlin they only have their brand "Dexter" and Stanley.
And they usually don't open at sundays
Cheers.

I'm in Rome, Italy.

Here Leroy-Merlin carries Usag as quality brand, Dexter as economic brand, and some other **** whose name I didn't remember, sometimes I see the occasional Stanley tools but the vast majority is Usag or Dexter.
The rebranded Wiha screwdriver was a surprise for me, it's the first time I see it on the shelf.

There was "Castorama", very similar to Leroy-Merlin (in fact, Leroy-Merlin has just acquired it) which used to carries Usag, Pastorino and Stanley, there's Brico (now transformed in "Self") with carries tools by Black & Decker (never seen a black & decker wrenches or socket before entering "Self" ..) and Obi that obviously sell Lux tools.

All this store (maybe not "Self") are normally open on sundays here in Rome, I'm not a fan of that type of store (you can find everything, minus what you want, and everything tends to be of very low quality) but it's great to have a place open on saturdays and sundays.

 

[Theloniousmonk]

Welcome IPV7NET! Nice tools - I've never heard of some of those German brands, but I'm just a naive American after all... I REALLY like that ISI ratchet.

Since you hail from Italy, I was wondering if you had any insight regarding Beta COO... I've read some accounts of Beta sockets being made in asia, as some of their ratchets and bits are, but I believe the subject is still in the air.

Hope you enjoy Monte's thread.

 

[servito]

what he said

Sorry Monte if I have upset you, after he only asked about your opinion.

@servito
Thank for share ur experience about KNIPEX & NWS stuff

My pleasure

I'm in Rome, Italy.

Here Leroy-Merlin carries Usag as quality brand, Dexter as economic brand, and some other **** whose name I didn't remember, sometimes I see the occasional Stanley tools but the vast majority is Usag or Dexter.
The rebranded Wiha screwdriver was a surprise for me, it's the first time I see it on the shelf.

There was "Castorama", very similar to Leroy-Merlin (in fact, Leroy-Merlin has just acquired it) which used to carries Usag, Pastorino and Stanley, there's Brico (now transformed in "Self") with carries tools by Black & Decker (never seen a black & decker wrenches or socket before entering "Self" ..) and Obi that obviously sell Lux tools.

All this store (maybe not "Self") are normally open on sundays here in Rome, I'm not a fan of that type of store (you can find everything, minus what you want, and everything tends to be of very low quality) but it's great to have a place open on saturdays and sundays.

First sorry and welcome to the forum (what a bad-mannered that I'm); here in Barcelona what you can see opened are the bars ,cinemas, theaters, museums and the hospitals (police, too), but not the stores; they are only allowed to open on sunday on some dates (but not many).

As you said, it happens many times that those stores don't have what you want, and most of the times they don't work with the brands you are looking for; it is the same as with computer parts/components with the stores here, they have a huge catalog of components, but when you want something (they have in their catalogs) it is always out of stock and don't know when it will be available again.

 

[american lockpicker]

It seems Bosch drill bits are different in the US than the EU or Asia. Also I have some Alpen bits on the way. A full set.

 

[ipv7net]

Welcome IPV7NET! Nice tools - I've never heard of some of those German brands, but I'm just a naive American after all... I REALLY like that ISI ratchet.

I had never heard of ISI until i received that ratchet, the same for Schmole and Rheidco. I'm very happy with that set, in the auction the seller limited the description to "german made socket and ratchet from military surplus" and the photo wasn't very clear, at the end the auction revelead as a real bargain, 25 euro for a set of very well made tools from reputable toolmakers.

Since you hail from Italy, I was wondering if you had any insight regarding Beta COO... I've read some accounts of Beta sockets being made in asia, as some of their ratchets and bits are, but I believe the subject is still in the air.

Can't add much more on this subject that hasn't been written previusly on this thread, i see that some ratchet, flexible head handle, some socket, etc is made by KoKen and know that other tools in the Beta catalog is just rebranded product, to be honest I'm not a big fan of Beta product, nothing wrong with quality, just that here in Italy you see Beta everywhere, so I want to try something different (none the less I'm going to order some 3/8 and 1/4 extension, ratchet, and other tools from Beta in the next few weeks).

Hope you enjoy Monte's thread.

I've spent some hours reading all the 233 pages of this thread, and i've enjoyed every single post, this thread is probably going to cost me some (lot of) money as I'm seeing myself buying more tools than needed in the next few months .. (and that's not entirely positive, 'cause I own a "money pit" bmw e30 and now I have to take care of an extremely abused e34 ..)

First sorry and welcome to the forum (what a bad-mannered that I'm); here in Barcelona what you can see opened are the bars ,cinemas, theaters, museums and the hospitals (police, too), but not the stores; they are only allowed to open on sunday on some dates (but not many).

Well, here small shop are not allowed to open on sunday (except some dates), but big store like Leroy-Merlin (or Ikea, etc) are always open ..
Unlike most museums, which seems to be always closed, specially on weekend where people have more time to spend ..

As you said, it happens many times that those stores don't have what you want, and most of the times they don't work with the brands you are looking for; it is the same as with computer parts/components with the stores here, they have a huge catalog of components, but when you want something (they have in their catalogs) it is always out of stock and don't know when it will be available again.

Here are the same, huge catalog, small stock, what you need is always on backorder. Maybe the next time instead of asking for some standard parts (like ddr2 memory or sata disk) i will try ordering an RL02 diskpack for this:

<a href="http://www.flickr.com/photos/31231773@N02/5042732362/" title="P5182033 by ipv7net, on Flickr"><img src="http://farm5.static.flickr.com/4108/5042732362_8e66c630f3.jpg" width="375" height="500" alt="P5182033" /></a>

or an inked ribbon for this:

<a href="http://www.flickr.com/photos/31231773@N02/5041938665/" title="IMG_5616 by ipv7net, on Flickr"><img src="http://farm5.static.flickr.com/4103/5041938665_b0c6392d24.jpg" width="500" height="375" alt="IMG_5616" /></a>

(which anyway is the pride and joy of the "Working Computer Museum" that some good friends is trying to set-up in Sicily, I had some good times repairing and using that system, like the Vax I'm using at home ..)

 

[servito]

I've spent some hours reading all the 233 pages of this thread, and i've enjoyed every single post, this thread is probably going to cost me some (lot of) money as I'm seeing myself buying more tools than needed in the next few months .. (and that's not entirely positive, 'cause I own a "money pit" bmw e30 and now I have to take care of an extremely abused e34 ..)

I also sepnt countless time reading all of the posts of this thread...

Well, here small shop are not allowed to open on sunday (except some dates), but big store like Leroy-Merlin (or Ikea, etc) are always open ..
Unlike most museums, which seems to be always closed, specially on weekend where people have more time to spend ..

That's a bit nosense, then what are museums for?

Here are the same, huge catalog, small stock, what you need is always on backorder. Maybe the next time instead of asking for some standard parts (like ddr2 memory or sata disk) i will try ordering an RL02 diskpack for this:

<a href="http://www.flickr.com/photos/31231773@N02/5042732362/" title="P5182033 by ipv7net, on Flickr"><img src="http://farm5.static.flickr.com/4108/5042732362_8e66c630f3.jpg" width="375" height="500" alt="P5182033" /></a>

or an inked ribbon for this:

<a href="http://www.flickr.com/photos/31231773@N02/5041938665/" title="IMG_5616 by ipv7net, on Flickr"><img src="http://farm5.static.flickr.com/4103/5041938665_b0c6392d24.jpg" width="500" height="375" alt="IMG_5616" /></a>

(which anyway is the pride and joy of the "Working Computer Museum" that some good friends is trying to set-up in Sicily, I had some good times repairing and using that system, like the Vax I'm using at home ..)

Hahahahaha, I think the only place you might be able to find spare parts is on a museum, and it wouldn't be quite difficult, since as you say are almost always closed
In one of your first pictures it seemed to me to have seen a part of a server on the floor, isn't?
Cheers.

 

[The Motts]

Recently, I added this to my (small) collection of Old World tools:

I haven't used it much, yet, but from what I have done with it in my basement, I'm very impressed with it. The Metabo website claims it has 885 in-lbs of max torque. I have no idea if that is true or any way of testing it, but I tried driving a 7"x3/8" lag screw through 5 1/2" of pressure treated pine. It'll drive the head to about 3/4 of an inch away from the surface before the internal overload protection cuts in.

 

[Case IH]

Recently, I added this to my (small) collection of Old World tools:

I haven't used it much, yet, but from what I have done with it in my basement, I'm very impressed with it. The Metabo website claims it has 885 in-lbs of max torque. I have no idea if that is true or any way of testing it, but I tried driving a 7"x3/8" lag screw through 5 1/2" of pressure treated pine. It'll drive the head to about 3/4 of an inch away from the surface before the internal overload protection cuts in.

that is nice looking

 

[american lockpicker]

or an inked ribbon for this:

<a href="http://www.flickr.com/photos/31231773@N02/5041938665/" title="IMG_5616 by ipv7net, on Flickr"><img src="http://farm5.static.flickr.com/4103/5041938665_b0c6392d24.jpg" width="500" height="375" alt="IMG_5616" /></a>

Damn I had a box full of new ones I sold for like a buck to a flea market dealer last year.

 

[mrtools]

@ipv7net
Welcome to the club bro
btw: awesome tools collection

@monte
hahahahaha ..thanks for offer ( knipex plier )

several area at my workplaces ( request by monte )

 

[mrtools]

Some electrical measuring instrument HIOKI insulation tester + FLUKE IR thermometer + KYORITSU earthing tester + KYORITSU clamp on meter + FLUKE multimeter

My little toys ready to destroy metter!!!!!!!!

 

[dlfiene]

mrtools,
What does your company do there? Looks very interesting!


If any body from Germany on this forum would be interested in bidding on this item on ebay for me and then shipping it to the United States I would really appreciate it. Please PM me if you will do this for me. http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItemnext&item=380314865923.html

 

[mrtools]

mrtools,
What does your company do there? Looks very interesting!

Precision metal stamping for electronic parts

 

[Rocklim]

Recently, I added this to my (small) collection of Old World tools:

I haven't used it much, yet, but from what I have done with it in my basement, I'm very impressed with it. The Metabo website claims it has 885 in-lbs of max torque. I have no idea if that is true or any way of testing it, but I tried driving a 7"x3/8" lag screw through 5 1/2" of pressure treated pine. It'll drive the head to about 3/4 of an inch away from the surface before the internal overload protection cuts in.

Air Cooled Batteries ? Does it have fan inside the batteries ?

 

[The Motts]

Air Cooled Batteries ? Does it have fan inside the batteries ?

The air cooled refers to the charger. There's a fan in the charger that blows air through the battery as it charges.

 

[servito]

The air cooled refers to the charger. There's a fan in the charger that blows air through the battery as it charges.

I think that is what Bosch does with their 36V lithium battery chargers, as they might get too hot while charging.

 

[Theloniousmonk]

I really want some new power tools now!


Finally getting pics of the Facom S151 ratchet and Turnus pick set I got a while ago:

I like this ratchet, it isn't necessarily pretty - but it does work. I replaced the black oxide slotted set screw in the head w/ a stainless steel hex cap screw - I like the looks much more. I also had to epoxy the plastic handle back on the ratchet - first time I used it, the handle spun in place... not a big deal by any means. This isn't "palm control", but seems to use the same internals - and honestly, I can put a some force on the head and have it still ratchet w/o reversing the direction.

(sorry about the pic quality)

I honestly have not needed to use the the pick set yet... I do like the feel of the handles, and the steel appears to be of very fine quality. The machining of the pick points is superb. Ze Germans really know how to package a tool too.

 

[american lockpicker]

I think that is what Bosch does with their 36V lithium battery chargers, as they might get too hot while charging.

They do it with the 18V Lithion too.

Nice ratchet Theloniousmonk!

 

[Bhae]

Today:

 

[johnnybentwrench]

Hi Everyone, I bought these Wera stainless steel hex wrenches, They are long style with a ball end and regular on the other. I like the rounded body, They are awesome in the hand. I use hex wrenches on BMW airheads. I picked up two more older 630 Hazet wrenches to go with the two I had. I have a special package hopefully arriving next week.

 

[mrtools]

Hi Everyone, I bought these Wera stainless steel hex wrenches, They are long style with a ball end and regular on the other. I like the rounded body, They are awesome in the hand. I use hex wrenches on BMW airheads. I picked up two more older 630 Hazet wrenches to go with the two I had. I have a special package hopefully arriving next week.

@johnnybentwrench
Woww!!!!!!! awesome hex wrench from WERA
more close up PIC please......