Tools from the old world

[Monte]

tools in action

 

[maico]

Knipex X-cut leverage vs other cutters.

 

[Luis Arturo]

Putty knife Acesa

Chisel Frohn

 

[BajaScout]

Being that the dealer is small and has only been open about two weeks, they don't have that many special tool boards up, and most are far from full.

Here is their engine/fuel tools board:

Today was my last day working there (boo!) but i have to go back to collect some tools i ordered from them soon. I'll get more pics then.

Another tool from the old world, VW injector pump/cam pulley puller:

It's really nicely made. And it should be for 80+ Euros!

I need one of the VW pullers. Anyone have one? I have rigged up a puller that works, but is a pain. Uses real thick washers to grab the pulley.

 

[Jure]

how smooth is hazet 863F ratchet, 1/4 and 3/8?? (compared to facom PC)

 

[Supe]

Blackhawk needle nose long pliers made by Proto

Where did you get these from? There's a seller on ebay but he doesn't ship overseas.

 

[texchappy]

Anybody know where I can get Torx T33 in any form here in the U.S.?

 

[Mr MoAiZo]

Where did you get these from? There's a seller on ebay but he doesn't ship overseas.

A friend of mine lived overseas in the US and brought it to Europe.
I bought it from the seller on eBay.

 

[Jure]

who makes this hex wrench?? it says HF,lol it reminds me of harbor freight but i know i'm wrong

 

[Miskin]

who makes this hex wrench?? it says HF,lol it reminds me of harbor freight but i know i'm wrong

Maybe HaFu

 

[lok]

Maybe HaFu

Right!

http://gw.alicdn.com/bao/uploaded/i1/T1IwyEXl0nXXaabJfb_093425.jpg

 

[Miskin]

Right!

http://gw.alicdn.com/bao/uploaded/i1/T1IwyEXl0nXXaabJfb_093425.jpg

This set is yours?
Off topic:
Lok I just passed you!

515

 

[lok]

This set is yours?
Off topic:
Lok I just passed you!

515

Νο it's not mine!

And...

Off topic:

Right!

 

[upgrading]

 

[Jure]

Right!

http://gw.alicdn.com/bao/uploaded/i1/T1IwyEXl0nXXaabJfb_093425.jpg

Maybe HaFu

thanks

 

[upgrading]

 

[tapace]

I would love to get my hands on some of those Facom T5.L pliers. Does anyone know of a good place to acquire them in the states?

 

[dede2897234]

I would love to get my hands on some of those Facom T5.L pliers. Does anyone know of a good place to acquire them in the states?

tapace,

Ultimate Garage sells the Facom T5.L pliers in the United States. Here is the link: Facom pliers. The owner is a long time GJ member. Many GJ members have purchased from him. He has an outstanding reputation here.


Dave

 

[jetdawg]

I have to say very impressed with gripons we got awhile back and customers are starting to appreciate them, virtually no slop and lots of heft I love it.

 

[kiraj]

 

[kiraj]

 

[Blöckw@rt]

All wrenches for just €24 (incl. shipping) at Ebay.

The good








The ****

 

[tapace]

tapace,

Ultimate Garage sells the Facom T5.L pliers in the United States. Here is the link: Facom pliers. The owner is a long time GJ member. Many GJ members have purchased from him. He has an outstanding reputation here.


Dave

Thanks Dave.

 

[sljeme345]

NOS from Stahlwille, peek up last week from my dealer.

 

[zkling]

That's cool, wait till FJ432 sees it. Do you know what year it was made aka how long it has been sitting around NOS?

 

[CanUK]

Not posted much lately, but figured my new tool purchase was worth the effort. This should be delivered on Saturday - then I just need to learn to use it properly. Boxford Industrial 280 lathe:

View media item 51267

 

[upgrading]

Thanks to the Hot Deals forum $9.19 worth of Swiss Made goodness was dropped off at my door today.

 

[sljeme345]

Thanks, I'm not sure how long was in stock. One company cancel order and remained 3 pieces.

 

[sljeme345]

Combination pliers from Belzer.

 

[Jure]

NOS from Stahlwille, peek up last week from my dealer.

koliko $ i koji ducan ako nije tajna

 

[sljeme345]

koliko $ i koji ducan ako nije tajna

Uzeo sam preko prijatelja, 1500kn + pdv. Preklopio sam PDV. Ako te zanima, mislim da moze sredit jos jedna.

 

[Jure]

Uzeo sam preko prijatelja, 1500kn + pdv. Preklopio sam PDV. Ako te zanima, mislim da moze sredit jos jedna.

javim ti kad sjedne povrat poreza,ako ostane jos koja do tada a Rmaster je

 

[Henning]

Not posted much lately, but figured my new tool purchase was worth the effort. This should be delivered on Saturday - then I just need to learn to use it properly. Boxford Industrial 280 lathe:



View media item 51267

Just the tooling for it now :-o A whole new world of expensive looks like a great little lathe!

 

[sljeme345]

javim ti kad sjedne povrat poreza,ako ostane jos koja do tada a Rmaster je

Hvala, dugo sam ih trazio
Slobodno javi, nesto cemo srediti.

 

[Snakevz]

Just bought two pairs of Connex round nose pliers (3.8€ each [emoji14] )

and 13 mm 1/4" Unior socket (probably taiwanese, but for portable tool kit it will do the job [emoji4] )
Does anyone know who is OEM for Connex pliers?

 

[Jure]

Just bought two pairs of Connex round nose pliers (3.8€ each [emoji14] )

and 13 mm 1/4" Unior socket (probably taiwanese, but for portable tool kit it will do the job [emoji4] )
Does anyone know who is OEM for Connex pliers?

Orbis je OEM za Connex,je unior koji je cijeli matiran i boja kroma ide na sivo je Taiwan.

 

[Snakevz]

Ok, hvala puno!
p.s. mislim da bi bilo ok da pričamo dalje na engleskom ovdje, da nas ne počnu psovat

 

[Jure]

Does Bahco offers repair kit for their 1/4 dual 80's here in Europe??

 

[Jure]

Ok, hvala puno!
p.s. mislim da bi bilo ok da pričamo dalje na engleskom ovdje, da nas ne počnu psovat

ye we'll be switching to english where did you found them,and tell me is that wire loop style all they had in stock or they had another style of connex priced that cheap?

 

[Snakevz]

BAT Cakovec, only this style for that price (luckily I need them pretty often ) they only had one more style from connex (wire strippers) for about 7-8€, and IIRC there was only one pair left...