Tools from the old world

[Jure]

BAT akovec, only this style for that price (luckily I need them pretty often ) they only had one more style from connex (wire strippers) for about 7-8€

8 eur seems like a good price for wire strippers made by orbis,they have the spring on the adjustible pin between the jaws like unior or its springless design like knipex?

 

[Snakevz]

I didn't try them (I hate these style of strippers) but IIRC they were wide open on the display so they've probably had spring

EDIT: found photo online (those in store did'nt have insulated grips, theyve had regular comfort grips)

http://ecx.images-amazon.com/images/I/31l1Av3McrL._SX300_.jpg

 

[Blöckw@rt]

Connex vs. Knipex

I like the Connex pliers (Made by Orbis) really good quality for a nice price.

 

[Snakevz]

Nice pliers there!
Is there any shop with Orbis stuff which has shipping to Croatia? Thank you for any information

 

[sljeme345]

Does Bahco offers repair kit for their 1/4 dual 80's here in Europe??

Yes, contact Diaprom, Dugo Selo.

 

[Snakevz]

Great, thank you!

 

[Blöckw@rt]

@Snakevz

But... no bargain !

http://www.reichelt.de/Zangen-2-Kom...o112b17e6057b9aab115c5484650d0295&LANGUAGE=EN

 

[Snakevz]

Thank you Blockwärt! Actually they are pretty cheap (knipex equivalent is ~25€ around here )

 

[sljeme345]

Today bought a new angle grinder for Fein.

 

[tapace]

[/URL][/IMG]

[/URL][/IMG]

[/URL][/IMG]

[/URL][/IMG]

[/URL][/IMG]

I've been a long time watcher of this thread. Been collecting tools for work for the past couple years. This is what I have so far in the "Old World" category.

 

[CanUK]

Just the tooling for it now :-o A whole new world of expensive looks like a great little lathe!

It fortunately does come with a few bits (I have no idea what the semi-circular cage-looking thing is in the top left of the pic?):

View media item 51282
I will need to buy some of the basics at least of course. Here it is loaded on the truck:

View media item 51283
Should be delivered tomorrow AM -need to get up early and clear some space for it.

 

[Henning]

[/URL][/IMG]

[/URL][/IMG]

[/URL][/IMG]

[/URL][/IMG]

[/URL][/IMG]



I've been a long time watcher of this thread. Been collecting tools for work for the past couple years. This is what I have so far in the "Old World" category.

That is quite a nice haul of my favorite driver ever, Wera 932a! Nice collection!

 

[Henning]

It fortunately does come with a few bits (I have no idea what the semi-circular cage-looking thing is in the top left of the pic?):



View media item 51282


I will need to buy some of the basics at least of course. Here it is loaded on the truck:



View media item 51283


Should be delivered tomorrow AM -need to get up early and clear some space for it.

Looks like tomorrow's both birthday and Christmas at once.

I don't immediately see what the semi circural thing does either but it will probably be something to do with the headstock.

Either way it looks like a great lathe!

 

[Qualitytools]

NOS from Stahlwille, peek up last week from my dealer.

That's really nice! May I ask how much and from where you got it?
Thanks

 

[Qualitytools]

[/URL][/IMG]

[/URL][/IMG]

[/URL][/IMG]

[/URL][/IMG]

[/URL][/IMG]

I've been a long time watcher of this thread. Been collecting tools for work for the past couple years. This is what I have so far in the "Old World" category.

And What a collection! Very Nice Indeed Can you tell us some more about the Wera Ratchet with a double handle one closer to the head and the other down at the end? Is is extendable?

 

[maico]

These don't seem to get much of a mention on the forum...

Development of...

https://www.behance.net/gallery/16110403/EvoBolt-power-cutter

 

[AV tinker er]

So I have some Knipex pliers and my adjustable are made in Spain but I felt this is my first purchase that is worthy for this thread.

Ignore the hammer, I posted this in another thread.

These wrenches feel great in the hand. I like the finish. Not full polish but not satin. I will be getting more

Sent from my Nexus 5 using Tapatalk

 

[dede2897234]

So I have some Knipex pliers and my adjustable are made in Spain but I felt this is my first purchase that is worthy for this thread.

Ignore the hammer, I posted this in another thread.

These wrenches feel great in the hand. I like the finish. Not full polish but not satin. I will be getting more

Sent from my Nexus 5 using Tapatalk

AV tinker er,

Would you mind taking a close up picture of one of the Stahlwille double open end wrenches? The second picture is blurry.


Thanks,

Dave

 

[AV tinker er]

AV tinker er,

Would you mind taking a close up picture of one of the Stahlwille double open end wrenches? The second picture is blurry.


Thanks,

Dave

Here you go. My phone doesn't have the best camera...

Sent from my Nexus 5 using Tapatalk

 

[sljeme345]

That's really nice! May I ask how much and from where you got it?
Thanks

Thanks Bought from Crotian importer for Stahlwille. Price was 200 euros + tax (25%), 250 euros. They still have two more

 

[sljeme345]

Here you go. My phone doesn't have the best camera...

Sent from my Nexus 5 using Tapatalk

Very nice, i like smooth galvanized finish of Stahlwille spanners.
Last week orderd Stahlwille double ended ring SW 20/12 and Stahlwille double opened SW 10/12 spanners.

 

[tapace]

And What a collection! Very Nice Indeed Can you tell us some more about the Wera Ratchet with a double handle one closer to the head and the other down at the end? Is is extendable?

It's called the Wera Koloss it's a 1/2" drive ratchet that doubles as a hammer. The handle is in 2 parts, that second handle is basically a cheater bar that attaches to the end of the standard handle for additional leverage. Alternatively the extension can be removed and a centering pin can be inserted instead to aid in aligning bolt holes. I work on large commercial and industrial HVAC equipment and it comes in handy while making repairs on cooling towers and large electric motors.
Here is a link to Wera's Koloss page:
http://www.wera.de/catalog_de.html?L=1&file=/en/root_category_ratchets_koloss.html

 

[kiraj]

 

[Jure]

 

[sljeme345]

Some new old stock of Belzer

 

[Monte]

how smooth is hazet 863F ratchet, 1/4 and 3/8?? (compared to facom PC)

i think the 1/4" is similar, the HZ 3/8" is smoother

Anybody know where I can get Torx T33 in any form here in the U.S.?

Torx 33 ?

NOS from Stahlwille, peek up last week from my dealer.

AWESOME !! I want one !!!
Does the dealer have a website ?

I've been a long time watcher of this thread. Been collecting tools for work for the past couple years. This is what I have so far in the "Old World" category.

nice haul !
















Talwaren Picard hammer

 

[sljeme345]

i think the 1/4" is similar, the HZ 3/8" is smoother
Torx 33 ?

AWESOME !! I want one !!!
Does the dealer have a website ?

nice haul !
















Talwaren Picard hammer

Very nice this one is 300g?

 

[bahcoswed]

Some new old stock of Belzer

Omg!!!! Where did you find NOS Sandvik Belzer wrenches? I would even trade my stahlwille combos for nos sandvik belzer germany! Anyone wants to do a change-up to stahlwille openbox 13 or 14 big sets? Or open ratch 17 ratcheting combos? I watch every day after a set sandvik belzer 1952m germany and have not seen one yet

 

[sljeme345]

i think the 1/4" is similar, the HZ 3/8" is smoother
Torx 33 ?

AWESOME !! I want one !!!
Does the dealer have a website ?

nice haul !


Thanks, web site:

http://antonio-hr.wix.com/unialati

They are direct importer for Stahlwille in Croatia. They still have two more on warehouse.

 

[sljeme345]

Omg!!!! Where did you find NOS Sandvik Belzer wrenches? I would even trade my stahlwille combos for nos sandvik belzer germany! Anyone wants to do a change-up to stahlwille openbox 13 or 14 big sets? Or open ratch 17 ratcheting combos? I watch every day after a set sandvik belzer 1952m germany and have not seen one yet

My wish is to collect complete set of Belzer, spanners and socket sets.
They not cost much, 40 euros

 

[sljeme345]

Today i found this set for 20 euros





If anyone knows where can i buy HD (heavy duty) tubular socket wrench set by Stahlwille or Hazet?

 

[Monte]

Very nice this one is 300g?

yes 300 gr.

Thanks, web site:
They are direct importer for Stahlwille in Croatia. They still have two more on warehouse.

Thanks !















Hazet 603 in 9mm

[/IMG]

 

[Qualitytools]

It's called the Wera Koloss it's a 1/2" drive ratchet that doubles as a hammer. The handle is in 2 parts, that second handle is basically a cheater bar that attaches to the end of the standard handle for additional leverage. Alternatively the extension can be removed and a centering pin can be inserted instead to aid in aligning bolt holes. I work on large commercial and industrial HVAC equipment and it comes in handy while making repairs on cooling towers and large electric motors.
Here is a link to Wera's Koloss page:
http://www.wera.de/catalog_de.html?L=1&file=/en/root_category_ratchets_koloss.html

Thanks for the link and explanation that's very clever.

 

[upgrading]

Austria !

Excellent Amazon Warehouse Deal on this 3 piece set. $38.97 shipped.
Nothing wrong with them as far as I can see.

 

[Roverbo]

Hvala, dugo sam ih trazio
Slobodno javi, nesto cemo srediti.

ye we'll be switching to english where did you found them,and tell me is that wire loop style all they had in stock or they had another style of connex priced that cheap?

Ahhh... it was like reading after welding galvanized steel

Omg!!!! Where did you find NOS Sandvik Belzer wrenches? I would even trade my stahlwille combos for nos sandvik belzer germany! Anyone wants to do a change-up to stahlwille openbox 13 or 14 big sets? Or open ratch 17 ratcheting combos? I watch every day after a set sandvik belzer 1952m germany and have not seen one yet

+1 to this! I have a few 1952s, normally i don´t fancy the glossy stuff, but the Belzers are just soooo nice!

Long time since my last posting, work, homework (or should i say projects in my home), family and dog took my time - but last sunday, and this sunday: Fleamarket time!

View media item 51353
A KEF-motor bench grinder "Slibette" - made by Københavns Elektromotor Fabrik (Copenhagen Electric Motor Factory), my guess is 1970´s. It was almost charcoal black - the pictures are after some wash up, and i also made some new safety acrylic screens, new cable etc. Runs like new! I will try to find a new grinding stone at the same stand next sunday.

View media item 51352
"Kugleleje motor - smøring unødvendig" - ball bearing motor, oiling not needed.

On the back of a trailer, obviously left in the rain for some days, rusty water running down the sides, i found this...

View media item 51350
Heuer Front 150 mm vice - again, pictures taken after a slight overhaul ...

View media item 51351
... now i got to make that big welding table ... much to big for my small work bench... Oh, did i mention the price? DKK 200,- (<35$).
Some wrenches, 5 DKK/each (<1$) ....Hazet, Matador, Dowidat, Heyco, Gedore, Matador, Dowidat, Bahco, Matador ...

View media item 51354
This is my first Bahco double ring wrench - and my first Heyco in AF imperial size

View media item 51355

 

[bahcoswed]

+1 to this! I have a few 1952s, normally i don´t fancy the glossy stuff, but the Belzers are just soooo nice!

Yes they are! But its not the fancy chrome I like with these, its have the thinnest head ever! Strong to! Bahco 1952m argentina vs sandvik belzer argentina! The germans is even thinner! Stahlwille feels pretty fat compare to belzer

 

[Roverbo]

+1 to this! I have a few 1952s, normally i don´t fancy the glossy stuff, but the Belzers are just soooo nice!

Yes they are! But its not the fancy chrome I like with these, its have the thinnest head ever! Strong to! Bahco 1952m argentina vs sandvik belzer argentina! The germans is even thinner! Stahlwille feels pretty fat compare to belzer

Except for the tools, my guess would be that the Argentines are more slim than the Germans ... (not to offend any of our german friends here - the danes are even more bulky than the germans).

Some of my Belzer and Sandvik-Belzers. The Sandvik-Belzer is a different pattern than the (older) Belzers (type 111). Have you ever seen a "quick-action" open end, like the bottom one? Belzer type 100. Same finish/beam pattern as type 1952.

View media item 51360
Sadly, the previous owner of the 19 mm type 1952 didn´t find the open end slim enough, so he gave it a grind...

View media item 51361

 

[bahcoswed]

Yes, but I only have 1 pc!

 

[Luis Arturo]

Claw Hammer Stanley Hercules made in England

Stanley tape measure pocket but made in USA

 

[Aleksey]

Hi guys, do any of you know where to find this set of screwdrivers? It is made by Gedore (not the new type of set but the old type) Thanks!

I collect tool screwdriver. But I have been unable to buy the Gedore screwdriver old sample, such as shown in the photo. I ordered them through the Amazon store but I had a screwdriver has a new design.

Thanks