Torque Wrench Repair

[mikester]

Is there a reliable place that repairs older torque wrenches ? My close to 40 year old Utica crapped out yesterday. Been looking online for a replacement but mine was a 1/2" that started at 0.
Ive looked at most of the brands out there and a lot of them start at 50.
The other thing I considered was buying another Utica or Armstrong off of ebay. Just not sure what I could do if they broke down the road.

 

[James-W]

I don't know of anyplace that repairs them, but I do know there are places that will calibrate them. Possibly you could send it back to the manufacturer for repair, or they may be able to tell you where to send it to be repaired.

Is this a tool that has sentimental value and that's why you want to get it repaired? The reason I am asking is because if you look around sometimes you can find them on sale. You can get some really good deals if you are willing to wait awhile and shop around.

 

[Professional Tool User]

If you know it needs a part and parts are not available, it's time to throw in the towel. As for calibration, go find a local business that does industrial instrumentation.

 

[visionguru]

When was the last time your Utica was calibrated? Started at 0 doesn't mean it's useable at 0. No matter what the brand, 25 ft-lb and below is unusable for a 1/2" torque wrench.

Unless there is sentimental value, your Utica is not worth fixing even if there is a place/parts.

 

[mikester]

I kinda figured that. Im a little bumbed since I had it so long.
I looked at the PIs, CDIs, Protos. Spent over an hour looking through the threads last night. Seems a lot of them start at 50lbs.
Ive found a few new Uticas and Armstrongs online that start at 20 and 30lbs. Just on the fence about buying something that was made by a company no longer in business. The flip side of that is the older stuff seems to have a better reputation and a lot of them were US made. The reviews on the current Kobalt, Craftsman and Husky werent all that great. Thoses are the most commen brands around here.
Would any of you guys buy a new Armstrong ?

 

[jasonphelps]

I have a 1/2 Utica round head that's maybe 40 years old. What broke on yours? Post a picture if you can.

 

[plinker]

I kinda figured that. Im a little bumbed since I had it so long.
I looked at the PIs, CDIs, Protos. Spent over an hour looking through the threads last night. Seems a lot of them start at 50lbs.
Ive found a few new Uticas and Armstrongs online that start at 20 and 30lbs. Just on the fence about buying something that was made by a company no longer in business. The flip side of that is the older stuff seems to have a better reputation and a lot of them were US made. The reviews on the current Kobalt, Craftsman and Husky werent all that great. Thoses are the most commen brands around here.
Would any of you guys buy a new Armstrong ?

If I needed one an NOS Armstrong would be a contender. Only thing really going against them is 36 tooth count ratchet head. Otherwise, PI & CDI are good tools. All depends on budget & what there is for deals.

I have seen some torque wrenches in 1/2 drive with a 10-150lb range. Depending on what is wrong with your Utica, Team torque may be worth calling to see if they can do anything.

 

[Super Mech]

Look up Angle repair. I don’t t know how to post the link. They repair torque wrenches and I think the prices are reasonable.

 

[mikester]

I have a 1/2 Utica round head that's maybe 40 years old. What broke on yours? Post a picture if you can.

I can post something later. I took the thing apart yesterday hoping it was something really simple. Pulled the head out and cleaned the small piece that fits into the notch. Gently put it back together and it still doesnt click. Pulled it apart a second time and looked down into the tube. I couldnt really tell if anything was broken so I took the ring off at the handle and tried to take that end apart. The handle gets to a point but wont come off all the way. Now I have a single ball bearing that I have no idea where it came from. Basically Im left with a friggin mess. LOL

 

[jasonphelps]

I haven't taken apart my Utica, but I've taken apart my NAPA (same as other Danaher) that has the spring loaded lock ring just like the Utica. The ball bearing should fit on a hole in the handle between the lock ring. It's hard to explain with words but I'll try and take a look at my Utica.

 

[jasonphelps]

My Utica must be different. It doesn't go down to 0 ft lbs.

 

[GRivera]

Look up Angle repair. I don’t t know how to post the link. They repair torque wrenches and I think the prices are reasonable.

I’ve used Angle for calibration and repair:


https://anglerepair.com/

 

[Stuart in MN]

There has to be a number of businesses in New York State that calibrate and repair torque wrenches. Do a search for calibration services in your area.