Torque wrench

[TKM51]

Hello
I recently purchased a Vintage Snap on wrench QJMR-210A I have found conversion tables for the settings What I have not solved is band around the base in increments of 10 to 40 is this a multi indicator eg 400 with a indicator of 10 =4000 cm.kgs
Any help would be appreciated
Regards
Terry M

 

[Kodiak]

I'm not familiar with that model, and I may be way off here but I'll try.

My Snap On torque wrench has a range of 5 to 75 ft/lbs. It's adjustable in increments of five on the shaft, or handle. But if you need a smaller increment, say 17 ft/lbs (not an increment of five), you use the ring, or band, to further adjust the setting by one or two ft/lbs. I feel like this may not be what you're talking about, so I'm not sure that's helpful.

I suspect you're not asking what the band does, but rather what the numbers convert to on that model. I'm sure someone will come along with that.

 

[TKM51]

Perfect that’s it exactly . I thought that after I set it down and walked away for a spell
Thanks for the reply
Regards
Terry

 

[Kodiak]

Perfect that’s it exactly . I thought that after I set it down and walked away for a spell
Thanks for the reply
Regards
Terry

Excellent. Glad I could help.