Toyota heater core help

[J king]

Hey guys.. I am building an old truck. I have an ac heater box mounted under dash and all fits nice but after looking at it I don’t like how high the heater core lines come out of the box. The core is in the bottom but aluminum lines extended several inches up. I want to change out the core with a different line directions.
I found Toyota and Lexus have cores that will fit in the box. These have oring connectors to the lines. I can’t find stub connectors to install. I really never saw connectors like these. I looked but couldn’t find a source. Any ideas? Thanks

 

[Larey]

Give us some pictures of what you are connecting them to, or what vehicles the Lexus and Toyota cores are from.

 

[firebirdparts]

The Toyota dealer will have them. They'll have something else attached, like a heater hose, but you need that anyway.

 

[L5wolvesf]

I have seen lots of info and pics of Toyota truck heaters here
https://www.yotatech.com/forums/

 

[J king]

Here is pic

 

[J king]

The Toyota dealer will have them. They'll have something else attached, like a heater hose, but you need that anyway.

Wanting to route the hoses straight off a 90 elbow thru the cowl.

 

[brownbagg]

go to a pick and pull junkyard

 

[J king]

Holy cow!and tear the whole dash out to get the ends!!! No thanks

 

[T_R]

Holy cow!and tear the whole dash out to get the ends!!! No thanks

Sledge hammer and battery powered sawzall and you could have what you need in a few minutes. Seriously, that's how things are usually done at U-pull yards.