Tractor Supply 2017 Clearance thread...
- Thread starter cajunfirehawk
- Start date
fastbike02
Well-known member
I bought a set of impact torx they had on clearance... hopefully they hold up
RRich
Well-known member
Ign
Well-known member
Everything at TSC this season had that stupid pattern. Apparently they think it's in. It's incredibly ugly, yes. That's why this'll be the "Hey Vern, put that on the big 1/2" impact and let's see what happens" set
The ratchet is surprisingly nice - at least 72T. Mine's a bit stiff but got better just working it a little bit by hand. I think with true use it would break in to be quite smooth, and it's way tighter (in terms of anvil slop) than my composite HF professional.
Last edited:
Ign
Well-known member
I got a 10% off entire purchase via snail mail today, good starting tomorrow thru sometime in early March, so watch your mail if you care.
bmrisko
Well-known member
Ign
Well-known member
Twisted the T25 the first time I used it and it was on a ratchet...not an impact.
Were these the really long ones? Those are the only impact torx I recall and I was pretty skeptical; I'd only use them as an "extended reach" set for deep holes.
fastbike02
Well-known member
Twisted the T25 the first time I used it and it was on a ratchet...not an impact.
that makes me feel warm and fuzzy about using them!
bmrisko
Well-known member
fastbike02
Well-known member
wonder how/if they have a warranty
torqueman2002
Well-known member
Thanks hawk.
One local TSC had none.
Today, I found close to 10 in the 'reduced' section of another local store. I must have looked, even asked, for 20 mins. before spotting them. Shelf/sticker price was $69, but rang up @ $49.99.
I will use the 2 kits to run air into the basement from the attached garage.
bmrisko
Well-known member
The China-made Autozone T-25 that I used instead has been holding strong for close to 10 years. So, yes, I was somewhat surprised...
torqueman2002
Well-known member
TSC Coupon.
Last edited:
http://www.tractorsupply.com/tsc/product/special-buy-schumacher-2-25-175a-12v-camo-wheel-charger
This is $65 in northeast Ohio. No pic
This is $65 in northeast Ohio. No pic
Ign
Well-known member
^^I can't tell you how many times I've wished my battery charger would blend into the weeds
doan
Well-known member
PeterT
Well-known member
Ign
Well-known member
fastbike02
Well-known member
I picked up two sets of magnets, i also plan to take a wire wheel to the camo
Ign
Well-known member
The camo Orcas have gone $99 in some areas. My store had 4 that never moved then they told me today somebody came in this morning and bought all four at $99. It wasn't me.
I checked a different store south of me and they still ring up at $149.
First I have known of markdowns to not be nationwide, however I'm guessing all stores will eventually follow suit.
I checked a different store south of me and they still ring up at $149.
First I have known of markdowns to not be nationwide, however I'm guessing all stores will eventually follow suit.
Ragin_Cajun
Active member
Found some good deals on Mayhew chisels and punches. Local store had many marked on clearance. Picked up a 5pc chisel set #90002 for $12
Ign
Well-known member
Damn the 20% off clearance is back this weekend. If someone were lucky enough to still find the camo Orcas at $99.....
http://circular.tractorsupply.com/h...d/browse?flyer_run_id=219843&locale=en&type=1
http://circular.tractorsupply.com/h...d/browse?flyer_run_id=219843&locale=en&type=1
2manytools
Well-known member
Ign
Well-known member
http://www.tractorsupply.com/tsc/product/orca-ice-retention-cooler-green?cm_vc=-10005
Look to your immediate right the second you enter the store. But also check the normal cooler section. Ignore the $239 on the website, it does not reflect in-store prices.
Look to your immediate right the second you enter the store. But also check the normal cooler section. Ignore the $239 on the website, it does not reflect in-store prices.
Old news, but some of you may want to keep your eye out for stragglers. 3-4 weeks ago I was in TSC and noticed they had Traveller brand winches on clearance. 8000# capacity with synthetic line. Normally $349, on clearance for $199. It rang up $139.
I bought two of them. I have been looking for a winch for my trailer for quite some time (never pulled the trigger on the HF Badlands unit waiting for a better deal). Glad I did!
I bought two of them. I have been looking for a winch for my trailer for quite some time (never pulled the trigger on the HF Badlands unit waiting for a better deal). Glad I did!
went in there Saturday and they had tons of clearance stuff.
gearwrench metric add-on set 21-25mm for $17.99 bought the only one.
3/4" drive impact socket set cro-mo in case, large sizes up to 1 1/2" $34.99. they are identical to the ingersol rand they had on the opposite shelf for a hundred bucks.
back of the store had tons of those junk camo tools, but they also had air tools. 1/2" junk impact wrenches for $9.99 but I did pick up a 3/4" twin hammer (supposedly 650 lb/ft) impact for $17.99 as well...so now I have an impact and sockets in 3/4" size...tested it out and seems decent.
Dewalt chrome polished ratchet/socket sets for half price but I skipped those.
and crescent brand tool sets for wrenches/ratchets/sockets in case for $21.99--good for a loaner set or trunk set for the kid.
gearwrench metric add-on set 21-25mm for $17.99 bought the only one.
3/4" drive impact socket set cro-mo in case, large sizes up to 1 1/2" $34.99. they are identical to the ingersol rand they had on the opposite shelf for a hundred bucks.
back of the store had tons of those junk camo tools, but they also had air tools. 1/2" junk impact wrenches for $9.99 but I did pick up a 3/4" twin hammer (supposedly 650 lb/ft) impact for $17.99 as well...so now I have an impact and sockets in 3/4" size...tested it out and seems decent.
Dewalt chrome polished ratchet/socket sets for half price but I skipped those.
and crescent brand tool sets for wrenches/ratchets/sockets in case for $21.99--good for a loaner set or trunk set for the kid.
fastbike02
Well-known member
i wish my store would put the large gearwrenches on sale I would like the sae set to match the metric i won on ebay
$5 off $25, ad $10 off $50
http://www.tractorsupply.com/downlo...tml?cm_re=20170221-_-Global-_-Save+Now+Coupon
http://www.tractorsupply.com/downlo...tml?cm_re=20170221-_-Global-_-Save+Now+Coupon
Thank you!
I forgot to post those, I grabbed a set too. Made in USA, I was impressed. nice little set for the money...should have grabbed a 2nd one...
Ign
Well-known member
Yeah def walk the hand tool aisle; all kinds of cool stuff. Johnson levels marked down, 24" Al $10.99 and 48" $15.99. There were plastic levels too but those don't exist to me.
My store had the metric completer set $21.99, one in stock. I could probably use the $5 coupon and get ~$17 plus tax if anyone really wants to pay shipping to them. PM me. edit:they had the fractional too
My store had the metric completer set $21.99, one in stock. I could probably use the $5 coupon and get ~$17 plus tax if anyone really wants to pay shipping to them. PM me. edit:they had the fractional too
Attachments
Ign
Well-known member
Ign
Well-known member
Ign
Well-known member
2002maniac
Well-known member
OP
cajunfirehawk
Well-known member
pic and label say 1/2"?
1/2" hybrid air hose for $11.99 . . . . IS . . . a great deal.
. . . . AND . . . 1/2" is Bigger and Better than 3/8" !!