Tractor Supply 2017 Clearance thread...

[homeschool]

Sent from my XT1254 using Tapatalk

 

[Poe34]

Sent from my XT1254 using Tapatalk

Is the extra 50% good on these?
Thanks for posting!

 

[homeschool]

Is the extra 50% good on these?
Thanks for posting!

I wouldn't think so. It's not even on all clearance tools, just selected ones. I've been passing up the orange handled brick chisel cause it was still tagged $8.99, the one I bought this morning actually rang up $2.29 (3.5"). All the stores around me are pretty much cleared out now . Was hoping to find a couple more pry bars, but alas....


Edit: Also 5pc orange camo welding magnet set $1.99, original $9.99.


Sent from my XT1254 using Tapatalk

 

[JoJoSnap]

Is it me? Did i miss out the sale on winch cable 4500 lbs??? Was it supposed to cost 139 awhile back then??? Other question can this cable handle pulling motorcycle to load up onto da truck flatbed? And light suv/car onto the trailer?


Sent from my iPhone using Tapatalk

 

[leftyz]

Is it me? Did i miss out the sale on winch cable 4500 lbs??? Was it supposed to cost 139 awhile back then??? Other question can this cable handle pulling motorcycle to load up onto da truck flatbed? And light suv/car onto the trailer?


Sent from my iPhone using Tapatalk

My store has a bunch of them in clearance, I think it's still $79.99

 

[JoJoSnap]

Dang that low? Mind telling me where this ts is at?


Sent from my iPhone using Tapatalk

 

[leftyz]

Dang that low? Mind telling me where this ts is at?


Sent from my iPhone using Tapatalk

I'm not 100% sure it's the same cable, but the store is in horseheads, ny

 

[JoJoSnap]

Cool! Horseheads?! Thats up there near Bath right? Will call up to confirm. Thanks man!


Sent from my iPhone using Tapatalk

 

[JoJoSnap]

I'm not 100% sure it's the same cable, but the store is in horseheads, ny

Just confirmed the price from that TS in Horseheads...159.99


Sent from my iPhone using Tapatalk

 

[leftyz]

Just confirmed the price from that TS in Horseheads...159.99


Sent from my iPhone using Tapatalk

Sorry man, must have been different winch cable.

 

[Ign]

They're doing the 2"x27' ratchet straps at 2 for $15 as part of their Spring Black Friday. Killer price if you own a trailer. Says 3 days only, not sure what those 3 days are.

Also right now Castrol GTX 15W-40 is $9.99/gal

 

[wttwoa]

They're doing the 2"x27' ratchet straps at 2 for $15 as part of their Spring Black Friday. Killer price if you own a trailer. Says 3 days only, not sure what those 3 days are.

Also right now Castrol GTX 15W-40 is $9.99/gal

looks like on the bottom of the tag it says april 28-30

 

[EOC_Jason]

Just got a mailer today, 10% off coupon, no limit to savings, includes clearance... Valid 6/20/17 - 7/4/17

 

[bubinga]

Think it was the job smart brand, saw the 3/8" air ratchet on sale for $7.50.

Sent from my MotoG3 using Tapatalk

 

[VinceG]

Their Treeline coolers are on clearance 20qt for 79.99 the bigger was 149. call your store it posted on pirate 4x4 forum the offroader sare buying them up. one store by me is out.

 

[W_E_S]

No "Treeline" coolers on the website. At least, I didn't see any.

 

[Foxmxrcer]

Their Treeline coolers are on clearance 20qt for 79.99 the bigger was 149. call your store it posted on pirate 4x4 forum the offroader sare buying them up. one store by me is out.

I saw it on pirate a few weeks ago, went to check my local tsc, and couldn't find them anywhere. They may be out of stock, but where would they have them stocked at?

Sent from my LGLS992 using Tapatalk

 

[VinceG]

I saw it on pirate a few weeks ago, went to check my local tsc, and couldn't find them anywhere. They may be out of stock, but where would they have them stocked at?

Sent from my LGLS992 using Tapatalk

The TSC in ST. John indiana had 4 left yesterday

 

[Foxmxrcer]

The TSC in ST. John indiana had 4 left yesterday

I meant where at in the store, with the seasonal stuff?

Sent from my LGLS992 using Tapatalk

 

[Ign]

The Poulan 40V OPE is on clearance. String trimmer kit retail $179 down to $99. I think the blower kit was $99 also. Didn't have time to look at all of it.

I need more cordless OPE like a hole in the head, plus I wouldn't get into an obscure battery platform like this unless I could easily adapt my Ryobi 40V batteries. A quick web search didn't seem to suggest any similarities between the two brands.....but again I didn't look real hard.

 

[Ign]

Also these plastic benches are down from $100 to $60. They actually seem to be of decent quality, but I've never owned one

 

[Ign]

Other stuff I grabbed yesterday:

Engine enamel Chevy orange $3.89 from $5.99

Magnum Steel Epoxy Stick $2.29 from $5.79 (I've always wanted to have some of this around for quick filler, not sure if it's any good)

2-pack of 60G Norton flap discs $4.79 from $5.99 (not a real great deal but I'm low)

Engine primer gray $2.19 from $5.99 (I'll use it as primer anywhere, I don't care)

Cold galvanizing spray $3.49 from $9.99 (solid deal if you work with chain link frames at all)

Big Red steel wheel chocks $9.99 from $12.99. Not a great discount here but I was fairly impressed with the quality, even though I'd guess they're only 14ga w.t. I plan to beef 'em up a little and spray 'em engine enamel Chevy orange for greater visibility

 

[DFB]

Well a bunch big clearance deals today for me at TSC. I'm slightly curious to where some of these items come from as most of them weren't in the store last week when I there browsing for deals.


The big 20 inch groove joint pliers were just $5.99

The 1/2 drive CrV impact socket both shallow and deep set $5.29

4pc set consisting of two 18" long shanked screwdrivers one a flat blade and the other a # 3 Philiips plus 2 pry bars all with hex end cap bolsters and rubber grips were just $3.99

An 11" nail puller was $2.49

And these dual ball tow bars 1 7/8" and 2" were $7.49 apiece

1.5 amp basic battery charger was also just $3.29

There was bunch of other stuff too so got an Olympia 10 pc drive bits set in ph and sq. both 2" and 3 lenghts for under $3.00 and a nice steel combo tool for the garden a hoe and 3 prong cultivator with large rubber handle for $1.20

I'll put all these items out for flea mkt tool sales except for the garden tool that will be a gift for a friend she come my tool tent looking for one exactly like that a couple of weeks ago. But maybe I'll keep the drive bit set for my self

 

[EOC_Jason]

I got a flyer in the mail a week or so ago... 10% off coupon... Anyone else get one?

Might have to swing by and see what clearance stuff I can find.

 

[DFB]

Well I dropped in in the local TSC again tonight as I went by on my return trip from my weekend run back to the orchard to get resupplied for my Sunday sales.

Got tapped out good on lot of stuff today

Needed some more of those $5.99 20" groove joint pliers and also found these today...

32 pc wrench sets for $ 10.99.

Has 20 standard length combo wrenches in both metric and SAE sizing (10 of each) and 12 additional stubby combo's in both metric and SAE (6 of each)

 

[Ign]

There's a variety of motor oils on clearance, most of which aren't a good deal (hovering $2.12 to $2.50/qt).

But I stumbled upon these 2 gal Mystiks at $19.99. They rang up $24.99 but she adjusted it for me. So, YMMV but even at $24.99 it wouldn't be bad for a syn blend boutique oil. Also I recently got a 10% coupon in the mail so others probably did, too.

 

[EOC_Jason]

There's a variety of motor oils on clearance, most of which aren't a good deal (hovering $2.12 to $2.50/qt).

But I stumbled upon these 2 gal Mystiks at $19.99. They rang up $24.99 but she adjusted it for me. So, YMMV but even at $24.99 it wouldn't be bad for a syn blend boutique oil. Also I recently got a 10% coupon in the mail so others probably did, too.

Wow, I'm going to have to swing by TS tomorrow... $20 for a 2.5 Gallon would be nice. I have a 10% off coupon I got in the mail too, covers the cost of tax and then a little.

 

[Ign]

Wow, I'm going to have to swing by TS tomorrow... $20 for a 2.5 Gallon would be nice. I have a 10% off coupon I got in the mail too, covers the cost of tax and then a little.

Those are just 2 gallon. If it were conventional 15W-40 wouldn't be a good deal 'cause you can regularly find gallons for $9.99 on sale at the major retailers. But $9.99 per gallon for boutique synblend ain't bad

edit: I have no idea if the Mystik stuff is considered any good, but most diesels I maintain won't care LOL

 

[EOC_Jason]

I saw they have the evaporust 1 gallon on sale again for $19.99 and if you happen to have a 10% off coupon that makes it even better...

 

[Ign]

Some stores have the wash rack mats again at $19.99. They bring these in periodically in the swing area and when they're gone, they're gone.

I mention because they're at least $5 less than HD (last I checked) and pretty good as anti-fatigue mats.

 

[chipdog4]

Saw this back by the tool boxes which allows you to carry the toolbox in you hitch receiver.
Sticker said regular price $50, clearance for $9.99

https://www.tractorsupply.com/tsc/product/dee-zee-hitch-style-mounting-kit-for-utility-chests

Also saw Jonsered chainsaw bars on clearance, regularly $80, clearance for $19.99

 

[Ole Slewfoot]

These were $5 and change, grabbed a couple for vice/grinder mounts.

 

[Ign]

Some stores have the trailer wheel lift down $10 on clearance to $30

I've raved about this concept all over the board, and used it repeatedly (although I built mine). This plus a cordless impact makes a trailer tire change a 10 minute ordeal, taking your time including clean up.

If u ever haul a tandem axle trailer and DON'T carry one of these you are sofa king we Todd Ed.

 

[chipdog4]

Found these Plano waterproof boxes down to $1.99 at a local Tractor Supply

https://www.amazon.com/Plano-Small-Guide-Waterproof-144900/dp/B007BJHQMI

 

[DFB]

Well just slightly off topic I sold off that nail puller tool this weekend (side note and to a guy who knew exactly what it was ) but before I did another person had a picked it up and the woman with him asked what it was and says to her "its a multi tool" and I just happened to be standing nearby and I said "No it's a nail puller and nothing more".

Then he says to her again "It's a Multi Tool" and then she says back to him...

"NO...IT'S JUST A NAIL PULLER"


I'm still laughing

 

[Ign]

Found this set of MIG pliers and chipping hammer at $2.79 clearance. The chipping hammer went straight to the scrap bin but the pliers are "ok". For sub $3 they're great although the pointy jaws don't taper nearly as much as they should -- they do still clean out nozzles, I tried

Also 5/8" spark plug sockets at $1.59. I like to tack cheap extensions to these to make my own custom setups for deep holes.

 

[W_E_S]

I saw they have the evaporust 1 gallon on sale again for $19.99 and if you happen to have a 10% off coupon that makes it even better...

$19 On Amazon free shipping.

 

[12three]

Saw this back by the tool boxes which allows you to carry the toolbox in you hitch receiver.
Sticker said regular price $50, clearance for $9.99

https://www.tractorsupply.com/tsc/product/dee-zee-hitch-style-mounting-kit-for-utility-chests

Also saw Jonsered chainsaw bars on clearance, regularly $80, clearance for $19.99

i want a hitch mount, website says theres stock at some semi-local stores... is there a way to verify prices before i drive out there?

 

[JohnKal]

Call and verify quantity and price.

You can ask them to put it aside until you get there

 

[BikerDad]

These were $5 and change, grabbed a couple for vice/grinder mounts.

how do you plan on using those? Just weld/bolt a plate to the un-balled face(s) and attach whatever to that, or cut the balls off and put plate(s) on?