Tractor Supply Deals Thread

[PearlWhiteGT]

No seats available anywhere near me and showing up online for $179.99.

 

[Rory Bellows]

Got a seat this afternoon. I never would of bought a new seat without the clearance price. This seat is nicer than the original on my zero turn.

 

[ducksface]

I need two seats.
I'm hitting the stores at
Farmington nm
Gallup nm
Holbrook az
Flagstaff az
Today.

i40 corridor.

 

[2manytools]

I need two seats.
I'm hitting the stores at
Farmington nm
Gallup nm
Holbrook az
Flagstaff az
Today.

i40 corridor.

why don't you order online? shows stock of stores

 

[ducksface]

A black at 44, they wanted 69 for yellow but price matched themselves

A black $189 seat model for $47.
The $47 can go on the backhoe. It's a tiny little flip up now.
One more yellow and the gator and the backhoe are done.
I'll buy others to put on the office chairs

Three seats 139? otd.
Thanks guys.
The 3/4 sockets were 80 bucks. No sale to me.
No seat Mounts.
Damn!
I forgot to look on their closeout shelf.

 

[Jeepster04]

Bought a seat also and I dont even need it. Wondering if it'll fit my ford 3000 should it ever need it. Current seat looks good.

 

[ducksface]

Four seats total.
Three in Farmington, none in Gallup, one in Holbrook, none in Flagstaff.
Seats in gator are now going to be black instead of yellow. I couldn't land a second yellow one.
The single yellow I bought will go on the backhoe and the deluxe seat will go on the loader.

The seats I'm replacing are just now starting to give up.
This was a very timely FIVE HUNDRED EIGHTY DOLLAR+- savings.

 

[BigSteve63]

Just installed seat on the Kubota - Thanks for posting this one!

Joplin, MO store had two seats when I got mine (Friday)

Steve

 

[Refractometer]

Got 3 seats in Central Virginia. Thanks for the heads up!

 

[tabs]

heres a $10/50 coupon im not going to use, so its up for grabs to the first person that uses it. just post on here to say that its gone

 

[loranger]

Got my seat mounted to my mower today and it is very nice! Even has a little drain hole to keep from holding water! When breaking down the box I also noticed it was made in Italy. Thanks again for posting!

 

[2manytools]

heres a $10/50 coupon im not going to use, so its up for grabs to the first person that uses it. just post on here to say that its gone

Thanks so much Tabs!

how long does it take to earn one typically, or is it random? After reading their rewards program, it sounds more like you get coupons for dog food and such after qualified spending each quarter

 

[Ign]

It's been super sporadic for me and the cashier has to choose the correct ID for you in the register. Inexplicably even if you only have one account you'll show up at least twice on the screen, and some stores train to always pick the first one while others train to always pick the second one, because nobody understands which is correct.

I've also tried to contact their Rewards dept before to have them add purchases to my account which were not recorded because the cashier failed to ask for my phone number (I was specifically told to do this when I pointed out my loyalty account had not been recorded), and they never responded.

I've given up on the "Neighbor's Club," it's just too unpredictable. If all this seems petty - you're right, it is ...it just annoys me because it's not how it's SUPPOSED to work. If you're not going to give a **** about your loyalty program, just don't do it at all.

 

[tabs]

Thanks so much Tabs!

how long does it take to earn one typically, or is it random? After reading their rewards program, it sounds more like you get coupons for dog food and such after qualified spending each quarter

that was for my birthday, pretty sure. glad someone could use it!

 

[ducksface]

I spent $5,000 on stall mats one week.
I got a dog food coupon for my trouble.
I've also received a free candy bar coupon, maybe on my birthday. I somehow remember it being only almond joy or some such restriction.
Worst point value system i know of.
An embarrassment.

 

[Jeepster04]

Ive randomly gotten 10% off coupons but mostly its dog food coupons.

 

[homeschool]

Slim pickings at the two stores I visited this morning.

Sent from my SM-G965U using Tapatalk

 

[Jeepster04]

Ive got a $10 off $50 and a 10% off coupon currently. Cant find anything to buy...

 

[stanj]

Saw this parts washer this morning.


Sent from my iPhone using Garage Journal

 

[Jeepster04]

I cant find anything to buy so if anyone can use it, here is a 10% off code that expires tonight.

10ncbdbvxmpita

 

[homeschool]

Starting the day with discount beef jerky is always a good sign. Rang up $5.29.

Sent from my SM-G965U using Tapatalk

 

[homeschool]

These brackets are stout, I used another pair for extension ladders.

Sent from my SM-G965U using Tapatalk

 

[LJZ]

Thanks for your support of Jim Dunn

 

[Crabman]

Black Friday deal, these sell out pretty quick around here.

PORTER-CABLE 24-Gallon Portable Air Compressor, $159.99

https://www.tractorsupply.com/tsc/p...orter+Cable+24+Gallon+Portable+Air+Compressor

 

[CZ Eddie]

Black Friday deal, these sell out pretty quick around here.

PORTER-CABLE 24-Gallon Portable Air Compressor, $159.99

https://www.tractorsupply.com/tsc/p...orter+Cable+24+Gallon+Portable+Air+Compressor

I feel like the harbor freight 21 Gallon 2.5 HP is a better deal and it's $149 all the time.
https://www.harborfreight.com/air-t...-cast-iron-vertical-air-compressor-61454.html

 

[Crabman]

Interesting that most of the mid size portable Central Pneumatic compressors are on "clearance" including that one. The big shop sized ones were clearance before being discontinued. Maybe the CP units are going to be discontinued also? HF sure likes to start and stop brands.

Interesting the reviews are better on the Porter Cable unit. Mostly due to a lot of 1's on the HF unit, presumably DOA's.

Thanks for making me compare.

 

[Copymutt]

Bought this one there last week. Paid $429.00 last one, last day of sale. Already have the old 21 gal. tank plumbed into it at placed in the attic.

 

[soloz2]

Thanks for the tip on the replacement tractor seat. I managed to find one at a store not too far from my house. I'm hoping it will fit the new to me Wheelhorse 312-8 garden tractor I picked up last week.

 

[CZ Eddie]

Interesting that most of the mid size portable Central Pneumatic compressors are on "clearance" including that one. The big shop sized ones were clearance before being discontinued. Maybe the CP units are going to be discontinued also? HF sure likes to start and stop brands.

That's a great question and one that I have wondered about ever since their super popular $900 60-gallon 5HP single stage with the Italian pump went EOL.

Maybe they're getting out of the PITA business of selling air compressors because they take up too much retail floor space and the markup isn't good enough?

Interesting the reviews are better on the Porter Cable unit. Mostly due to a lot of 1's on the HF unit, presumably DOA's.

Other than it being loud as heck, I was happy with mine.
Paid $150 on sale and sold it two years later for $110 on Craiglist.
$40 to try it out for two years works for me!

 

[Crabman]

Eddie,,

Other than it being loud as heck, I was happy with mine.

Which one did you have for two years?

Thanks

 

[vavet]

Bought this one there last week. Paid $429.00 last one, last day of sale. Already have the old 21 gal. tank plumbed into it at placed in the attic.

I have a Husky unit at work that looks just like that DeWalt, except it's black. It's a really nice unit and unbelievably quiet. I sorta keep hoping my old oil-free compressor will die so I have an excuse to buy one like that.

 

[RRich]

I have a Husky unit at work that looks just like that DeWalt, except it's black. It's a really nice unit and unbelievably quiet. I sorta keep hoping my old oil-free compressor will die so I have an excuse to buy one like that.

That model is sold in many different colors and brand names. I have the Porter-Cable version. I think they're all really made by CH.

 

[soloz2]

The clearance seat bolted right up! So much better than the old seat that was getting my left leg wet when I sat on it [emoji2955]

 

[loranger]

Tons of DEF stuff marked down.

Untitled by loranger1, on Flickr

Untitled by loranger1, on Flickr

 

[lafester]

I picked up a few moving blankets today.
3.49 for a 2 pack down from 10, in store pickup only.



Sent from my Pixel 3 XL using Tapatalk

 

[JohnKal]

I picked up a few moving blankets today.
3.49 for a 2 pack down from 10, in store pickup only.

I wish. Still $10 around me.

 

[Digital4n6]

In the BF ad, the Gearwrench ratcheting wrench set (32 piece) at $69.99 seems to be a very good deal. I picked up the Husky 30 piece (no 5/16 or 12mm stubby, that's the difference) for $59 at Home Depot last week. Same Gearwrench 70032 set at HD is $104.

$90 --> $70 starting Tuesday 11/24.

https://www.tractorsupply.com/tsc/product/gearwrench-32-piece-ratcheting-wrench-set?cm_vc=-10005

 

[N2 Many Projects]

Dewalt Flexvolt Tool kit. 2x 6AH 60v flexvolt batteries, DCS388 60v Flexvolt Recip Saw, DCF887 20v Max XR 1/4" impact Driver, charger and plastic Tough System box $199.00

SKU 1610684

Dewalt Kit DCKTS295T2

This kit normall sells for $500+ any where else.

Deal is in store only so call around to find the deal.

https://slickdeals.net/f/14537345-y...-and-charger-199-tractor-supply-in-store-only

 

[hartlogan]

Dewalt Flexvolt Tool kit. 2x 6AH 60v flexvolt batteries, DCS388 60v Flexvolt Recip Saw, DCF887 20v Max XR 1/4" impact Driver, charger and plastic Touch system box $199.00

SKU 1610684

Dewalt Kit DCKTS295T2

This kit normall sells for $500+ any where else.

Deal is in store only so call around to find the deal.

I picked one of these up yesterday, helluva deal. If they don’t have any in stock, ask if they have any on order. My local store had two show up in the truck the next day, both are gone now though.


Sent from my iPhone using Tapatalk

 

[N2 Many Projects]

Yes it seems like a good deal to me. I drove a ways to get it.

I am wondering what kind of experiance y'all might have with the 60v flexvolt batteries being used in any of the 20v max or 20v Max XR tools. I ask because I have seen a review that claims the 60v flexvolt batteries can fry 20v max tools.