sevensandeights
Well-known member
I'll have to look for the blower receipt.
Tractor Supply Deals Thread
- Thread starter pat9198
- Start date
honza.vosalik
Well-known member
Ummm, NO
Ton ton
Well-known member
If anyone can find Shell Rotella 10W30 diesel grade in gallon jugs @ your local TSC. Snap them up quickly. The competition is charging double right now. I know this from first hand experience. It's like looking for bigfoot.
Last time I was in TSC (a month ago) they had one gallon of Delo 15w40.
Costco in Frederick MD had a whole pallet of Kirkland 15w40 last week.
5w40 diesel oil has been harder to come by.
Haven't seen Rotella T6 anywhere. It's as if all the oil and chemicals on the face of the earth have disappeared and SOPUS is incapable of producing more. I bought the last two jugs from my local PepBoys about 2 months ago. It's been 3-4 months since I've seen any at Walmart. For gassers I am still seeing jugs of 0w40 and 5w40 at various stores that meet API SN and/or Euro/Porsche/Audi specs. My daily is a turbo Subie and I like the Brotella because it's cheap and good, but until Shell gets its act together some other brand will get my money.
Costco in Frederick MD had a whole pallet of Kirkland 15w40 last week.
5w40 diesel oil has been harder to come by.
Haven't seen Rotella T6 anywhere. It's as if all the oil and chemicals on the face of the earth have disappeared and SOPUS is incapable of producing more. I bought the last two jugs from my local PepBoys about 2 months ago. It's been 3-4 months since I've seen any at Walmart. For gassers I am still seeing jugs of 0w40 and 5w40 at various stores that meet API SN and/or Euro/Porsche/Audi specs. My daily is a turbo Subie and I like the Brotella because it's cheap and good, but until Shell gets its act together some other brand will get my money.
Tractor Supply's website has a coupon for 10% off of purchases made online for in store/curbside pickup. Scroll to the bottom of the homepage and you'll see the advertisement. It expires tonight(3/25). I apologize if this has been previously posted elsewhere.
trim
Well-known member
Thanks! You just saved me $4 on the dog food I was going to pick up in the morning anyway.
bubinga
Well-known member
Maybe I should go there and get some cat food for little Delilah.
NotSoSimple
Active member
- Joined
- Oct 24, 2010
- Messages
- 31
PlantItDeep
Well-known member
- Joined
- Jun 16, 2021
- Messages
- 368
I also recieved that promotion. 100 points is equivalent to $1 (though have to get to 1000 to get the coupon for $10)
MAYBEN
Well-known member
I saw on the site, saw that promo, then I logged into the app and didn’t get a thing!
red
Well-known member
Anyone with Makita 18v setup?
hit SD at 5:21pm Tool only
slickdeals.net
Product Rating is 4.9
4.9 (58)
SKU: 156428999
As a Neighbor, you are eligible to earn 1 point per dollar on this purchase
hit SD at 5:21pm Tool only
In Store Only! YMMV Makita 18 Volt Brushless Lithium Ion Blower, XBU03Z tool only $49.99
A great price on this if you have one in stock at your local TSC! Also available for curbside pickup. This item is $117 on Amazon currently. Product Details With zero emissions and lower noise, ...
slickdeals.net
Makita
$49.99
18 Volt Brushless Lithium Ion Blower, XBU03Z
Product Rating is 4.9
4.9 (58)
SKU: 156428999
As a Neighbor, you are eligible to earn 1 point per dollar on this purchase
Ton ton
Well-known member
$13.33 for a flock block. I know it's not a tool related post, but with the egg shortage poultry feed /supplies seem to be in short supply as well. The other local feed store is charging more for flock blocks in addition to being mouse eaten. So if you have poultry, try the flock block out. Just check for mouse damage before you buy. Speaking from experience unfortunately. Flock blocks help with excessive pecking behavior.
Thank You for this, my tractor supply had one left which I got for 79.99 plus tax. Great deal!
upgrading
Well-known member
Some JobSmart stuff has been marked down
JobSmart 253 pc. Mechanic Tools Set mm and SAE $79.99
JobSmart Combination & Ratchet Wrench Set, 12 pc $9.99
JobSmart 16 Gauge Extension Cord, 15 ft., Green $3.49
tractorsupply.com/tsc/product/jobsmart-16-guage-extension-cord-15-ft-green-wj-2316g15gn?cm_vc=-10005
JobSmart Metal Cut-Off Wheel Set, 115 mm, 25 pc $4.99
Bunch more stuff you can look for at link
JobSmart 253 pc. Mechanic Tools Set mm and SAE $79.99
JobSmart Combination & Ratchet Wrench Set, 12 pc $9.99
JobSmart 16 Gauge Extension Cord, 15 ft., Green $3.49
tractorsupply.com/tsc/product/jobsmart-16-guage-extension-cord-15-ft-green-wj-2316g15gn?cm_vc=-10005
JobSmart Metal Cut-Off Wheel Set, 115 mm, 25 pc $4.99
Bunch more stuff you can look for at link
Crabman
Well-known member
Not sure where you are at but most of it is available where I am
YMMV
JohnKal
Well-known member
Same here
PlantItDeep
Well-known member
- Joined
- Jun 16, 2021
- Messages
- 368
Definitely YMMV
And of course the normal TSC website bugs - many items showing as available available for delivery until you try to add to cart.
Some good deals though - I picked up some consumable items (grinding discs, etc)
And of course the normal TSC website bugs - many items showing as available available for delivery until you try to add to cart.
Some good deals though - I picked up some consumable items (grinding discs, etc)
BonzoHansen
Well-known member
I grabbed this today. For the price it'll make a good road box
(Whoops, it's listed above! )
(Whoops, it's listed above! )
Was at my local store yesterday, they had 2 Dewalt 13 amp 4.5-5in angle grinders on the clearance shelf for $69.99 marked down from $149.99.
They have Dewalt brushless 20v max reciprocating saws for $99.99. Good price. The nearest one to me that had them in stock was about 50 minutes away. I ended up doing a price match at home depot and avoided the drive.
Daytonaer
Well-known member
Tractor supply store #707 (PA) has 2 Makita 6.5" 18v circular saw tool only for $60 on the back clearance rack.
If you have use maybe your store has some.
Item number
1660906
If you have use maybe your store has some.
Item number
1660906
snickers muncher
Well-known member
DeWALT 3.7 HP 60 gal. Single Stage 155 PSI Stationary Electric Air Compressor
$549.00YMMV
My TSC has all their Hobart stick welding electrodes on clearance for 60-75% off. 5lb boxes for $12-15, 10lb boxes for $30-35, small packs and even stainless rods for $7.
All the wire brushes, chipping hammers, Hobart MIG tips, rosebuds, cutting torch tips, etc....all on clearance.
All the wire brushes, chipping hammers, Hobart MIG tips, rosebuds, cutting torch tips, etc....all on clearance.
Last edited:
These are heavy! They feel like quality units…
Looks like you got one heck of a deal, that's a new product according to their website
Two 20V 5Ah batteries and a tool for $144 YMMV.
I saw this on Slickdeals and it worked for me. It seems it may be store specific, so if you have more than one store in your area, check them all. The tool choices are: grease gun; cutoff saw; vacuum; speaker or light. I already have the vacuum and it is great as well. I went with the cut off tool.
Batteries: https://www.tractorsupply.com/tsc/p...3824768&clickId=5258487579&affiliate_id=18097
I saw this on Slickdeals and it worked for me. It seems it may be store specific, so if you have more than one store in your area, check them all. The tool choices are: grease gun; cutoff saw; vacuum; speaker or light. I already have the vacuum and it is great as well. I went with the cut off tool.
Batteries: https://www.tractorsupply.com/tsc/p...3824768&clickId=5258487579&affiliate_id=18097
Steel_Rain
Well-known member
- Joined
- Apr 23, 2024
- Messages
- 1,341
For $35 bucks and if you’re a GearWrench fan, I think it’s a great deal for a road kit. I normally don’t like the soft cases, but everything appears to be good quality and I like the case design.
A couple of weeks ago somewhere else on the internet someone said tractor supply was phasing out Torin products and will be replacing them with store branded jacks and jackstands. Now it seems the stores around me have some jacks and stands on clearance ~40% off. Apparently some tractor supply stores also do sales of additional 50% off clearance items which would be a really good deal. Some guy got this jack for $90 with the additional 50% off. No I'm not jealous I don't know what you are talking about.
haneyrm
Well-known member
I bought that 54 piece Gearwrench set and it’s a solid set for $35. I’m going to use it as my truck set as the soft case is nice and quiet.
Was wondering around today and found this deal on a Gearwrench 202 piece set which includes 1/4”, 3/8” and 1/2” sockets and ratchets. This is almost a non-skip set. I think it’s only missing the 23mm socket. Looks like everything else is there. This set is 60% off at $49. For $15 more than the 54 piece set you get a full rack of 1/2” shorty sockets, a 1/2” ratchet, a 1/4” ratchet, a bit driver, a bunch of bits, hex keys and nut drivers. Wrench selection is weak but wrenches are not why I bought this set.
Of course I could not help myself and just got home from picking up this set. It’s a great set and will be put to good use alongside the 54 piece set. I think the 202 piece set is a better value over the 54 piece set but they are both solid values.
Hex keys are not shown in this pic but this set includes both SAE & metric sets. They snap into those open spaces in the lid.
202 Piece Gearwrench Set
Was wondering around today and found this deal on a Gearwrench 202 piece set which includes 1/4”, 3/8” and 1/2” sockets and ratchets. This is almost a non-skip set. I think it’s only missing the 23mm socket. Looks like everything else is there. This set is 60% off at $49. For $15 more than the 54 piece set you get a full rack of 1/2” shorty sockets, a 1/2” ratchet, a 1/4” ratchet, a bit driver, a bunch of bits, hex keys and nut drivers. Wrench selection is weak but wrenches are not why I bought this set.
Of course I could not help myself and just got home from picking up this set. It’s a great set and will be put to good use alongside the 54 piece set. I think the 202 piece set is a better value over the 54 piece set but they are both solid values.
Hex keys are not shown in this pic but this set includes both SAE & metric sets. They snap into those open spaces in the lid.
202 Piece Gearwrench Set
I saw this on Slick Deals earlier today. Says there is 4 in stock at a store 20 miles away. I'd pick one up if it was at the store in town...great deal!
I'm a huge fan of the Crescent kits that also include various pliers and adj wrenches ( Crescent kit ). Decent, not great, quality but the price and form factor make it great for a car kit - it can be found on sale frequently for just over $100. But that Gearwrench 202 pc set for $50 would be a higher quality start and then throw in some pliers/adj wrenches and you would have a better kit for less money.
Steel_Rain
Well-known member
- Joined
- Apr 23, 2024
- Messages
- 1,341
Tractor Supply is at it again:
So it's $49.99 plus another 10% off, so about $45 bucks plus tax. Not all stores have this deal so YMMV.
That's a good deal for a bigger set (some filler) with wrenches and a lifetime warranty.
So it's $49.99 plus another 10% off, so about $45 bucks plus tax. Not all stores have this deal so YMMV.
That's a good deal for a bigger set (some filler) with wrenches and a lifetime warranty.