To avoid these ads, REGISTER NOW!

Trivia: What is this?

To avoid these ads, REGISTER NOW!
P

PCustoms

Well-known member
Joined
Jul 23, 2011
Messages
23,684
Location
VT
jayemm said:
maybe for lifting buckets with wire handles.
Click to expand...
My first thought was lid remover, but the angles looked wrong.

I could see carrier, but for most people the bucket would drag the ground....
 
R

RTM

Well-known member
Joined
May 13, 2019
Messages
13,468
Location
SF Bay Area
PCustoms said:
By who, any other markings?

Looks like a handle/grip of some sort.
Click to expand...
Back in the old days, when packages from retail were tied with string, they made package carriers. Some had a folding hook. Wonder if that what it is.
 
J

jayemm

Well-known member
Joined
Dec 18, 2018
Messages
1,605
Location
up high down low
PCustoms said:
My first thought was lid remover, but the angles looked wrong.

I could see carrier, but for most people the bucket would drag the ground....
Click to expand...
Going by the picture it looks like the bucket would only be about 4" lower than carrying by hand.
 
To avoid these ads, REGISTER NOW!
R

RAS61

Well-known member
Joined
Sep 14, 2012
Messages
538
Location
Low Country, SC
Going back to my early Boy Scout days, I was gonna guess the Left Handed Smoke Shifter the older guys sent us to look for but could never find :sneaky:
 
L

lonestarky

Well-known member
Joined
Mar 28, 2011
Messages
367
Location
Lindenhurst IL
Lol, even posted the picture in opposite orientation to use. Never would have thought that handle went the other way like a plane. Tricky.

Has to be two a two handed handle for axe sharpening maybe?
 
OP
A

AffableCurmudgeon

Well-known member
Joined
Jan 26, 2009
Messages
1,906
Location
Triad Area NC
Lol - Some people are taking this way too seriously.
It was just an inconsequential trivia question - no setup, no rigging, no fake news.

Collectively, this forum has probably the most tool knowledge of any other place on earth. One little tricky trivia question would not diminish that distinction at all.
 
W

Willie Makeit

Well-known member
Joined
Dec 30, 2013
Messages
938
Old Man Roger said:
Video?
Click to expand...
20+ years in machine shops and various other fabrication shops. It's called on the job training, not a youtube video. A file only cuts in one direction, which is AWAY from you when held with the tang towards you. When I see someone using a file like a toothbrush I just shake my head.
 
Last edited:
P

PBCampbell

Well-known member
Joined
Feb 2, 2009
Messages
871
Location
WV
Maybe you could come down off your mountain and explain or demonstrate how that holds a file then. It looks like the file would fall off every time you pick it up. Maybe there is a strap?
 
O

Old Man Roger

Well-known member
Joined
Apr 6, 2017
Messages
18,316
Location
Palm Coast Florida
Willie Makeit said:
20+ years in machine shops and various other fabrication shops. It's called on the job training, not a youtube video. A file only cuts in one direction, which is AWAY from you when held with the tang towards you. When I see someone using a file like a toothbrush I just shake my head.
Click to expand...
Not picking up the file on the backstroke is just easier, it‘s probably faster too.

Im guessing you would wrap a finger around the file to hold it in place?
 
N

neophyte

Well-known member
Joined
Apr 23, 2012
Messages
10,015
Location
Pennsylvannia
Old Man Roger said:
Not picking up the file on the backstroke is just easier, it‘s probably faster too.

Im guessing you would wrap a finger around the file to hold it in place?
Click to expand...
It looks like there is a socket under the handle shaped section.
The tapered tang gets pushed into the socket, and remains in place since pushing the file forward continues to force the file tang into the socket.
 
O

Old Man Roger

Well-known member
Joined
Apr 6, 2017
Messages
18,316
Location
Palm Coast Florida
neophyte said:
It looks like there is a socket under the handle shaped section.
The tapered tang gets pushed into the socket, and remains in place since pushing the file forward continues to force the file tang into the socket.
Click to expand...
Ya, I see that, but what keeps it from falling out if you’re filing at a down angle?
 
W

Willie Makeit

Well-known member
Joined
Dec 30, 2013
Messages
938
Old Man Roger said:
Not picking up the file on the backstroke is just easier, it‘s probably faster too.

Im guessing you would wrap a finger around the file to hold it in place?
Click to expand...
like i said before, "if one knows how to properly use a file" ... you are dulling and deforming the "teeth" on the file by dragging it backwards across the workpiece.

you made the statement that files are consumables, while this is true to a certain extent, I have files in my tool box that have been in use for well over 20 years and still cut effectively enough that I still use them on a regular basis. I mean, ALL tools can be considered consumables when they aren't used in the proper fashion, i.e.: using a screwdriver as a prybar, using a crescent wrench as a hammer, etc.

The holder the OP original posted is made in such a way that once you put the tang into the hole it also places a downward force on the file with the little "nib" on the end by deflecting the file a bit and there is no need to hold it in place. The downward force the user exerts to move the file along the workpiece "pushes" the file deeper into the socket under the handle. Really no different than a standard file "handle" is simple held to the file body by nothing more than force-fit & friction.
 
Last edited:
You must log in or register to reply here.
To avoid these ads, REGISTER NOW!
Top Bottom