Truck Wheel Hub problem???

[JasonHuang]

Does anyone know how to remove the Wheel Hub from
Truck DAF CF 85.410 ?
Left wheel wheel hub is not tight , so i can easily remove.
But the Right side it's just too tight .
I have to remove it in order to replace & check the bearing .

Can some one , recommend some tools ? for the extractor Wheel Hub .
The price have to be reasonable .

Thanks!

 

[p_mori7]

https://cardiagn.com/steering-system-daf-cf65-cf75-cf85/

 

[Ole Slewfoot]

Is the problem the right side is stuck to the spindle and won't come off the truck, or that the bearing race refuses to come out of the hub?

 

[JasonHuang]

Hello Mr.Ole
Sorry did not describe clearly ,
Yes, the right side is stuck to the spindle , and won't off the truck.
I only took the left side picture , sorry for misunderstanding.

Just need someone could help me to solve this problem !
thanks

 

[JasonHuang]

Thanks man
The website did give me a lot of information.
But it's seem i must by the tools for it.
Do you have some recommendation of someone selling the wheel hub tools extractor??

 

[WittHay]

Tiger Tool 10903 HD Hub Puller

https://www.tigertool.com/product/heavy-duty-universal-hub-puller/

Or something homemade similar to that tool

 

[jubilee]

Bolt a length of chain to lug bolts directly across from each other with lug nuts. Hook slide hammer on chain and hammer on it. I’ve also hooked a come along to chain and something solid ( usually my service truck) , put strain on hub and rap it with hammer until it pops lose.

 

[JasonHuang]

Tiger Tool 10903 HD Hub Puller

https://www.tigertool.com/product/heavy-duty-universal-hub-puller/

Or something homemade similar to that tool

Thanks guys , i have just purchase one extractor like this.
And the guy will send it to me tomorrow !!
Let's see what will going on !!
thanks

 

[JasonHuang]

Bolt a length of chain to lug bolts directly across from each other with lug nuts. Hook slide hammer on chain and hammer on it. I’ve also hooked a come along to chain and something solid ( usually my service truck) , put strain on hub and rap it with hammer until it pops lose.

Hi jubilee
Many thanks for your kindly advise.
That really impressive.
I will try it , but first just wait for my tools coming !
i will share the picture....... if i have success solve this problem.

 

[JasonHuang]

Is the problem the right side is stuck to the spindle and won't come off the truck, or that the bearing race refuses to come out of the hub?

Hello Mr.Ole
Sorry did not describe clearly ,
Yes, the right side is stuck to the spindle , and won't off the truck.
I only took the left side picture , sorry for misunderstanding.

Just need someone could help me to solve this problem !
thanks

 

[Ole Slewfoot]

If the bearing is bad, it may have welded itself to the spindle...which would also then need to be replaced.

I have done the chain trick a well.

 

[geartow]

I use a bar puller such as https://cdn2.bigcommerce.com/server.../ATD-3048__50329.1408342756.1280.1280.jpg?c=2

 

[JasonHuang]

If the bearing is bad, it may have welded itself to the spindle...which would also then need to be replaced.

I have done the chain trick a well.

Hi Ole
Finally , my tools coming.....and just finish it without 3 minutes...
Sometime,, really need the tools . Fortunately , it's not too expensive.
Otherwise i will not buy....
Did you know this brands? i have never heard before it's called H.C.B tools.
Anyway , thanks you for answering !

 

[JasonHuang]

I use a bar puller such as https://cdn2.bigcommerce.com/server.../ATD-3048__50329.1408342756.1280.1280.jpg?c=2

It's looks awesome !
I bought the universal extractor for remove it.

 

[WittHay]

HCB looks like they have a wide selection of specialty tools and they are close to you.

The only company I know that makes a lot of specialty HD truck tools is Tiger Tools. A local BC company. Being Canadian made, their products aren't cheap.

The universal HD hub puller is very similar to your HCB hub extractor

 

[JasonHuang]

HCB looks like they have a wide selection of specialty tools and they are close to you.

The only company I know that makes a lot of specialty HD truck tools is Tiger Tools. A local BC company. Being Canadian made, their products aren't cheap.

The universal HD hub puller is very similar to your HCB hub extractor

Actually , I usually got the tools from Tiger tools ,Tech pro tools and some Canadian local company.
I from Taiwan but my workshop is located in Vancouver Georgia street.
Just 50 minute drive.. to the tiger tools shop.

Just buy H.C.B tools in eBay and it's looks not bad and cheaper.
Tiger tools is nice , but for the wheel hub extractor , they don't have extra adapter for Hino, Fuso.

It's my first time to purchase the tools from H.C.B tools
It's looks quality and price is fine . with extra adapter.

Anyway , thanks you so much for your kindly advise!
No my problem is solve !!!