To avoid these ads, REGISTER NOW!

TX4Runner 20x18 Garage Setup

OP
T

TX4runner

Well-known member
Joined
Mar 9, 2014
Messages
299
Location
Houston, TX
Finally doing some work in the garage. Now that football is over and I’m still waiting on stuff for taxes, I finally can start on my “winter” maintenance projects. The truck is now 5 years old was told the battery was on the way out so I went to Costco and got a new one. Didn’t want to have issues before the cold front this week as well as planning to have the M3 up in the air for maintenance. Got the scanner out and reset the smart battery charging settings.

Once the truck was sorted, I got the M3 up on the quickjacks and got the brake fluid flushed out.
IMG_2206.jpeg
Initially had an incomplete seal with pressure bleeder and got brake fluid running down the reservoir. 🤦🏾‍♂️ which lead lots of cleaning with brake cleaning and a delay in the actual flushing. IMG_2207.jpegBut it’s all done. Garage is officially broken in. Now the rest of the M3 maintenance can start next weekend.

IMG_2208.jpeg
 
To avoid these ads, REGISTER NOW!

jonshonda

Well-known member
Joined
Jul 17, 2017
Messages
4,731
Location
Wisconsin
It's always something, and a brake fluid mess isn't something you want to half-*** clean up either. Nothing more frustrating and fun-sucking then when an easy project turns into a mess.

Very nice M3 you've got there! I've never owned a BMW but have been tempted to dip my toes into that pool. I've been thinking of trying something out a bit less "desirable" (aka expensive) then an M-car, and looking into the 128i's. They seem like a mini-M3 of sorts but aren't exactly easy to find in manual either.
 
To avoid these ads, REGISTER NOW!
OP
T

TX4runner

Well-known member
Joined
Mar 9, 2014
Messages
299
Location
Houston, TX
The M3 finally came down off jack stands today. I had to take out the front coilovers to adjust the ride height as I was rubbing the tires and scrapping the bumper. That’s now reset and hopefully working.
IMG_2345.jpeg
I adjusted the parking brake as it wasn’t holding. I replaced the wheel studs as they had been on for a few years and many wheel changes and driving event so a little preventative maintenance.
Had some autox friends who had the. Snap after a few years. So wanted to avoid that.

IMG_2340.jpeg
Out of the garage I changed the brake fluid on the truck. Oh my god is that easier than on the BMWs. No ramps, no jack, no tire removal. Just crawl under each tire and the bleed ****** is right there.
IMG_2343.jpeg
Now everyone is tucked back up and on trickle charges. Green dot under cover for 911 and extension cord behind the cobra in the way back.
IMG_2347.jpeg

Tomorrow I just get to enjoy them with a few drives.
 
To avoid these ads, REGISTER NOW!
Top Bottom