KCarGuy
Well-known member
Tonight I had to tackle a job that I was putting off, I had to dig a trench from my House, under a concrete sidewalk behind the house...next to the driveway and finish next to my garage to run a new (larger) Gas Line.
Digging under the sidewalk was a real Pain in my rear...all clay and stone.
So....I took a piece of 3 foot 1/2" steel tubing, slit the front end and inserted a 1/8 steel 4" x 4" piece of metal. Welded that up and ground the plate like a large Butterfly Bit. then welded an old broken Bit inside the other end, so I could chuck it in my Electric Drill...Worked like a charm!
Drilled from one side to the other and scooped out the loose dirt and rocks with my wifes extention garden tool.
Anyone else come up with some quik...low tech tools that made their life easier?
Lets hear about them, or see em!
Mine will make a great paint mixer also...
Digging under the sidewalk was a real Pain in my rear...all clay and stone.
So....I took a piece of 3 foot 1/2" steel tubing, slit the front end and inserted a 1/8 steel 4" x 4" piece of metal. Welded that up and ground the plate like a large Butterfly Bit. then welded an old broken Bit inside the other end, so I could chuck it in my Electric Drill...Worked like a charm!
Drilled from one side to the other and scooped out the loose dirt and rocks with my wifes extention garden tool.
Anyone else come up with some quik...low tech tools that made their life easier?
Lets hear about them, or see em!
Mine will make a great paint mixer also...