Mark100
Active member
Hello,
I have a UDAS-60 that I am installing in my garage. Ceiling height is 12'. I originally hung the heater 6" from the ceiling but that made the exhaust vent (under eave) at about 9". Manual says to be 12"+. I moved the heater down an additional 18" from the ceiling. Now the bottom of the heater is right at 10' and the exhaust vent is a little over 2' under the eave.
My question; is there anything wrong or possible code violation with the current setup?
Sent from my SM-G960U using The Garage Journal mobile app
I have a UDAS-60 that I am installing in my garage. Ceiling height is 12'. I originally hung the heater 6" from the ceiling but that made the exhaust vent (under eave) at about 9". Manual says to be 12"+. I moved the heater down an additional 18" from the ceiling. Now the bottom of the heater is right at 10' and the exhaust vent is a little over 2' under the eave.
My question; is there anything wrong or possible code violation with the current setup?
Sent from my SM-G960U using The Garage Journal mobile app