Any idea?
M Mintgrun Well-known member Joined Oct 7, 2015 Messages 2,101 Location Kingston, Wa. Oct 24, 2021 #2 They look like saw supports for an old school miter box. The stiff back of the saw runs through the opening at the top and there is a slit for the blade below that, with clearance for the offset in the teeth. Tom
They look like saw supports for an old school miter box. The stiff back of the saw runs through the opening at the top and there is a slit for the blade below that, with clearance for the offset in the teeth. Tom
OP J JCU Member Joined Jun 16, 2019 Messages 11 Location South East MN Oct 24, 2021 #3 I think you’re right.
T toolmiser Well-known member Joined Sep 1, 2009 Messages 1,653 Location La Crosse, WI Oct 24, 2021 #4 I would also agree
F four.cycle Well-known member Joined Oct 19, 2015 Messages 28,579 Location Tacoma, Washington Oct 24, 2021 #5 yes. they look similar to the ones in my Rockwell miter box
OP J JCU Member Joined Jun 16, 2019 Messages 11 Location South East MN Dec 3, 2021 #6 I found the rest of the saw as well. Now it makes sense lol. Thanks everyone.