Unlisted (orderable) Snap On part numbers

[kunkernator]

A lot of us know that a lot of Snap On tools (such as screwdrivers and pliers) are made in different colors, and can be found by adding the suffix (G, R, O, etc.) after the part number. The tools can be found by using the search function on Snap On's website, but they do not have an official page in the catalog.

Besides the standard colors and such, let's make a list of these "secret" (not well known) part numbers that are ACTIVE and can be ordered (not "one time truck deals", these must be available to anyone from the website). I will start;

PL300CFY - 3 piece YELLOW pliers set - $109.50
SPP925 - 2 piece 3' promo wrench - $198.00
CAT1200 - Snap On paper catalog - Free
SDDXL70AG - 7 piece green hard handle (square) cabinet screw driver set (also available in "R" (red), "O" (orange)) - $149.95

I have more numbers listed somewhere, will post later.

 

[monkeyspanners]

ignore me.....

 

[stonesfan68]

SSDMR4BPM hot pink ratcheting screwdriver
STL73003 pink streamlight nano lights - (keychain light)
STL74350 pink streamlight strion LED
SNLSJWT10P - pink penlight
KMC922APTP - pink micro roll cab
KMC923APTP - pink micro top chest

 

[G_P]

Awesome. Just ordered a catalog. Hopefully it shows up!

 

[ChevyEFI]

some items (3' promo wrench) will backorder indefinitely, no?

 

[86k10]

Maybe a stupid question but I can't find the power strip for the krsc carts. What is the number?

 

[BigAl62]

Awesome. Just ordered a catalog. Hopefully it shows up!

OK, call me stupid, but where did you order a catalog from? I'm without a Snap On dealer for the first time since I started wrenching (32 years ago). During past lean times my buddies dealer was happy to act as my dealer, but he has a new guy who doesn't want to deal with anyone not employed at a shop he services even though I told him I would pay in full, no payments on a truck account.

 

[canuckian]

Maybe a stupid question but I can't find the power strip for the krsc carts. What is the number?

KAPS4 is the only one I could find.

 

[Subyroo651]

OK, call me stupid, but where did you order a catalog from? I'm without a Snap On dealer for the first time since I started wrenching (32 years ago). During past lean times my buddies dealer was happy to act as my dealer, but he has a new guy who doesn't want to deal with anyone not employed at a shop he services even though I told him I would pay in full, no payments on a truck account.

Snap-On Catalog

You Enter the Cat1200 just like you're ordering a tool.

 

[Murphy4570]

SSDMR4BPM hot pink ratcheting screwdriver
STL73003 pink streamlight nano lights - (keychain light)
STL74350 pink streamlight strion LED
SNLSJWT10P - pink penlight
KMC922APTP - pink micro roll cab
KMC923APTP - pink micro top chest

You wouldn't happen to know of more part numbers for the micro toolboxes, would you?

Dicking around on snappy's website, I've found the number for the white ones.

KMC922APT - white roll cab

 

[kunkernator]

Dicking around on snappy's website, I've found the number for the white ones.

KMC922APT - white roll cab

Now that is what I am talking about! I am going to see if my student discount will cover it

As for the guys that ordered the catalog; yes they will show up. They used to be $5, then they were free and you could order an unlimited qty, now they are free 1 per person. I ordered 10 for free once upon a time..... All 10 showed up, oversized box and all.

 

[balane]

I have no numbers to offer but I just wanted to say that this is an excellent thread. However I fear it's going to end up costing me money.

 

[Drunken Yak inc]

Any numbers for the Blue Pearl handle ratchets and screwdrivers?

 

[RV77]

Thanks kunkernator for posting these numbers.Especially the cabinet screwdrivers.

 

[purplezr2]

You wouldn't happen to know of more part numbers for the micro toolboxes, would you?

Dicking around on snappy's website, I've found the number for the white ones.

KMC922APT - white roll cab

Thread I started with a bunch of PN

I also have a PDF from snap on for all the PN for the magnetic socket trays that there sets started coming in a few years ago, I will have to take screen shots and post

 

[kunkernator]

Any numbers for the Blue Pearl handle ratchets and screwdrivers?

I am not sure that Snap On currently makes them. Someone correct me if I am wrong.

I also have a PDF from snap on for all the PN for the magnetic socket trays that there sets started coming in a few years ago, I will have to take screen shots and post

That would be awesome to see! I love those mag trays.

 

[theamcguy]

Thank you. This is a really helpful thread

 

[BigAl62]

Thanks Subyroo651! I'm going to order one!

 

[platypus20]

OK, call me stupid, but where did you order a catalog from? I'm without a Snap On dealer for the first time since I started wrenching (32 years ago). During past lean times my buddies dealer was happy to act as my dealer, but he has a new guy who doesn't want to deal with anyone not employed at a shop he services even though I told him I would pay in full, no payments on a truck account.

Saw the same thing happen last week, a guy walked onto the truck, he wanted a ratchet and 4 sockets, had the cash in his hand, the dealer told him to call the toll free number and order it from the factory, or go to Sears and get what you need. He then said "I sell to no one not on my defined routes, now get off my truck". Must be nice to turn money away.

 

[trout]

Magnetic bit ratchet: TM72 and TM72SET

 

[czgunner]

Saw the same thing happen last week, a guy walked onto the truck, he wanted a ratchet and 4 sockets, had the cash in his hand, the dealer told him to call the toll free number and order it from the factory, or go to Sears and get what you need. He then said "I sell to no one not on my defined routes, now get off my truck". Must be nice to turn money away.

Wow, I've got to be honest, if I saw my Snappy driver do that, I wouldn't spend another dime on his truck.

 

[Subyroo651]

Wow, I've got to be honest, if I saw my Snappy driver do that, I wouldn't spend another dime on his truck.

I would take that approach personal and let that guy have a piece of my mind!

That's no way to treat anyone, especially someone with cash in hand. I understand the Snap-On dealer agreements but he could have handled that way more effectively

 

[STGFordCrazy04]

I'm starting to get that vibe from my snappy guy also. He wants me to finance tools instead of paying cash.

 

[czgunner]

All 3 of the Snappy guys I've dealt with in Vancouver have been really cool.
I guess we're lucky.
I don't know if this is listed yet or not, but S6810 is the new 1/4 drive 8mm/10mm deep flip socket for the newer cars under shields.

 

[kunkernator]

I don't know if this is listed yet or not, but S6810 is the new 1/4 drive 8mm/10mm deep flip socket for the newer cars under shields.

Unlisted! It does show up in the search, but no product page.

 

[ChevyEFI]

Saw the same thing happen last week, a guy walked onto the truck, he wanted a ratchet and 4 sockets, had the cash in his hand, the dealer told him to call the toll free number and order it from the factory, or go to Sears and get what you need. He then said "I sell to no one not on my defined routes, now get off my truck". Must be nice to turn money away.

Some people are stupid, including that driver.

The SO truck closest to my house issues me receipts to "the garage at which he's stopped." instead of telling me to piss off.

 

[jdcompman]

some items (3' promo wrench) will backorder indefinitely, no?

Yes they are backordered indefinitely.

 

[atwageman]

Saw the same thing happen last week, a guy walked onto the truck, he wanted a ratchet and 4 sockets, had the cash in his hand, the dealer told him to call the toll free number and order it from the factory, or go to Sears and get what you need. He then said "I sell to no one not on my defined routes, now get off my truck". Must be nice to turn money away.

I'm in Charlotte NC and the Snap On truck here states on the outside of the truck as part of the paint scheme....."OPEN TO THE PUBLIC". I've also seen more than one truck in Charlotte too. I'm assuming they are owned by the same person.

I really comes down to the driver on who they want to do business with. It's obvious here in Charlotte the drivers don't turn down money from no one.

 

[kunkernator]

New colors, just came out!

MG325MFBLK - black 3/8" impact
MG725MFBLK - black 1/2" impact

PDR5000MPRPL - purple 1/2" air drill
PDR5000MBLUE - blue 1/2" air drill

These are in stock and ready to ship.

 

[BDT/NWMN]

Saw the same thing happen last week, a guy walked onto the truck, he wanted a ratchet and 4 sockets, had the cash in his hand, the dealer told him to call the toll free number and order it from the factory, or go to Sears and get what you need. He then said "I sell to no one not on my defined routes, now get off my truck". Must be nice to turn money away.

Former drug dealer turned SnapOn dealer??