USED USA Sockets for trade Added plombs
Would like to trade larger groups to save shipping
All standard length unless noted
A few have engraving, prices plus shipping, make an offer, willing to brake up groups for quantity swaps
Walden 3/8” Drive 12 point
#4024 3/4”, #4022 11/16”, #4020 5/8”, #4018 9/16”, #4014 7/16
Walden ¼” Drive 6 point
#3110 5/16”, #3109 9/32”, #3108 ¼”, #3107 7/32- 2 Each, #3106 3/16” $10
Industro Super ½” Drive 12 point
#1228 7/8”, #1225 25/32, #1224 ¾”, #1220 5/8”, #1214 7/16”
Industro Super 3/8” drive
#2722 11/16”
Duro-Chrome ½” Drive 13/16” $10
P&C ½” Drive 12 point #6028 7/8” 2 Each, #6018 9/16”, #6014 7/16”
P&C ½” Drive 8 point #6090 5/8”, #6082 3/8 $10 Pending HankMurphy
S-K 3/8” Drive 12 point
#45128 7/8” 2 each, one “Wayne”, #45128 ¾”, #45120 5/8”, #45216 ½”
S-K 3/8” Drive 6 point
#45116 ½” 2 Each, #40414 7/16” med-deep
S-K 1/4” Drive 6 point
#40916 ½”, #40911 11/32”, #40910 5/16”, #40908 ¼”, #40907 7/32”, #40906 5/16”
#41916 ½” Deep, #41914 7/16” Deep, #41912 3/8” Deep, #41910 5/16” Deep $20
Misc. 1/4“ Drive $.50 Each
Challenger #1314 7/16” 12 point DEEP
Challenger #1016 1/2” 12 point
Challenger #1012 3/8” 6 point
Speedmaster 11/32” 6 point
Speedmaster ¼” 6 point
Penens Corp. #1212 3/8” 12 point
Wright #2014 7/16” 6 point NEW Pending HankMurphy
Bonney #V12 3/8” 12 point Pending HankMurphy
Thorsen #12T 3/8” 12 point Pending HankMurphy
Apex #1110-D 5/16” 12 point
Craftsman #BE 7/16 12 point
USA ¼” 6 point
Powercraft #84H4762 3/16” 6 point
Husky USA #20108 ¼” 6 point
Husky USA #CM 1212 3/8” 12 point
Now I am in need of the following
Well I finally got around to setting up my Hansen tray’s, time to fill in some holes and upgrade some foreign sockets
Craftsman sockets wanted very good to new prefer older V thru GI series, non-laser etched all 6 point unless noted. I don’t think some of these sizes were carried by craftsman will consider other US made brands
¼” drive standard 1/8”, 5/8”, 4.5mm, 15mm
¼” drive DEEP 1/8”, 5/32”,1/2, 9/16”, 5/8”, 4.5mm, 5.5mm, 15mm,
3/8” drive standard, 15/16”, 1”, (8mm, 20mm--12pt)
3/8” drive DEEP 15/16”, 1”, 6mm, 7mm, 8mm, 20mm 21mm
½” drive standard, 12mm, 21mm
½” drive DEEP, 1 1/8”, 1 ¼”, 10mm, 11mm, 12mm, 13mm, 15mm, 16mm, 18mm, 20mm, 23mm, 24mm, 25mm,
Proto Professional 3/8” drive
Standard ½” (5216) 12pt., 15/16” (5230) 12pt., 1” (5232 ) 12pt.,
½” drive
Deep 1 1/8“ (5336) 12pt., 1 ¼” (5340) 12pt.
MAC 3/8” drive these model #’s preferred but all considered
¼” Standard # X86
5/16” Standard # X106
7/8” Standard # X286
1” Standard # X326
¼ “Deep--#XD086
15/16” Deep--#XD306 or 302
1” Deep--#XD326 or 322
Snap on 3/8” drive
15/16” Deep--#SFS 301
1” Deep--#SFS321
Combo 7/8 in 1228 1942 some grinding on the box end
Combo 11/16 in 1222 1942
Combo 5/8 in 1220 1942
Combo 5/8 in 1220 1942
Combo 9/16 in 1218 1942
Combo 9/16 in 1218 1942
Openend 25/32x19/32 in. 3032 1942
Openend 9/16x1/2 3026 1942
Openend 9/16x1/2 3026 1942
Openend 9/16x1/2 3026 Pebble
Openend 1/2x7/16 3025 1942
Openend 3/8x7/16 3021 1942
Openend 3/8x7/16 3021 1939-40
Openend 3/8x7/16 3021 Pebble
Openend Ing.11/32 in ? 194?
Boxend 9/16x1/2 1126 1942
Boxend 7/16x1/2 1125 Pebble
Boxend 3/8x5/16 1120 1942
Boxend 3/8x5/16 8180 1942
Boxend 3/8x5/16 8180 1942
Boxend 5/8x3/4 1132 1931
Flair Nut 5/8 in 3720 Pebble Pending
Would like to trade larger groups to save shipping
All standard length unless noted
A few have engraving, prices plus shipping, make an offer, willing to brake up groups for quantity swaps
Walden 3/8” Drive 12 point
#4024 3/4”, #4022 11/16”, #4020 5/8”, #4018 9/16”, #4014 7/16
Walden ¼” Drive 6 point
#3110 5/16”, #3109 9/32”, #3108 ¼”, #3107 7/32- 2 Each, #3106 3/16” $10
Industro Super ½” Drive 12 point
#1228 7/8”, #1225 25/32, #1224 ¾”, #1220 5/8”, #1214 7/16”
Industro Super 3/8” drive
#2722 11/16”
Duro-Chrome ½” Drive 13/16” $10
P&C ½” Drive 8 point #6090 5/8”, #6082 3/8 $10 Pending HankMurphy
S-K 3/8” Drive 12 point
#45128 7/8” 2 each, one “Wayne”, #45128 ¾”, #45120 5/8”, #45216 ½”
S-K 3/8” Drive 6 point
#45116 ½” 2 Each, #40414 7/16” med-deep
S-K 1/4” Drive 6 point
#40916 ½”, #40911 11/32”, #40910 5/16”, #40908 ¼”, #40907 7/32”, #40906 5/16”
#41916 ½” Deep, #41914 7/16” Deep, #41912 3/8” Deep, #41910 5/16” Deep $20
Misc. 1/4“ Drive $.50 Each
Challenger #1314 7/16” 12 point DEEP
Challenger #1016 1/2” 12 point
Challenger #1012 3/8” 6 point
Speedmaster 11/32” 6 point
Speedmaster ¼” 6 point
Penens Corp. #1212 3/8” 12 point
Wright #2014 7/16” 6 point NEW Pending HankMurphy
Bonney #V12 3/8” 12 point Pending HankMurphy
Thorsen #12T 3/8” 12 point Pending HankMurphy
Apex #1110-D 5/16” 12 point
Craftsman #BE 7/16 12 point
USA ¼” 6 point
Powercraft #84H4762 3/16” 6 point
Husky USA #20108 ¼” 6 point
Husky USA #CM 1212 3/8” 12 point
Now I am in need of the following
Well I finally got around to setting up my Hansen tray’s, time to fill in some holes and upgrade some foreign sockets
Craftsman sockets wanted very good to new prefer older V thru GI series, non-laser etched all 6 point unless noted. I don’t think some of these sizes were carried by craftsman will consider other US made brands
¼” drive standard 1/8”, 5/8”, 4.5mm, 15mm
¼” drive DEEP 1/8”, 5/32”,1/2, 9/16”, 5/8”, 4.5mm, 5.5mm, 15mm,
3/8” drive standard, 15/16”, 1”, (8mm, 20mm--12pt)
3/8” drive DEEP 15/16”, 1”, 6mm, 7mm, 8mm, 20mm 21mm
½” drive standard, 12mm, 21mm
½” drive DEEP, 1 1/8”, 1 ¼”, 10mm, 11mm, 12mm, 13mm, 15mm, 16mm, 18mm, 20mm, 23mm, 24mm, 25mm,
Proto Professional 3/8” drive
Standard ½” (5216) 12pt., 15/16” (5230) 12pt., 1” (5232 ) 12pt.,
½” drive
Deep 1 1/8“ (5336) 12pt., 1 ¼” (5340) 12pt.
MAC 3/8” drive these model #’s preferred but all considered
¼” Standard # X86
5/16” Standard # X106
7/8” Standard # X286
1” Standard # X326
¼ “Deep--#XD086
15/16” Deep--#XD306 or 302
1” Deep--#XD326 or 322
Snap on 3/8” drive
15/16” Deep--#SFS 301
1” Deep--#SFS321
Combo 7/8 in 1228 1942 some grinding on the box end
Combo 11/16 in 1222 1942
Combo 5/8 in 1220 1942
Combo 5/8 in 1220 1942
Combo 9/16 in 1218 1942
Combo 9/16 in 1218 1942
Openend 25/32x19/32 in. 3032 1942
Openend 9/16x1/2 3026 1942
Openend 9/16x1/2 3026 1942
Openend 9/16x1/2 3026 Pebble
Openend 1/2x7/16 3025 1942
Openend 3/8x7/16 3021 1942
Openend 3/8x7/16 3021 1939-40
Openend 3/8x7/16 3021 Pebble
Openend Ing.11/32 in ? 194?
Boxend 9/16x1/2 1126 1942
Boxend 7/16x1/2 1125 Pebble
Boxend 3/8x5/16 1120 1942
Boxend 3/8x5/16 8180 1942
Boxend 3/8x5/16 8180 1942
Boxend 5/8x3/4 1132 1931
Flair Nut 5/8 in 3720 Pebble Pending
Last edited: