Using one thermostat... how would you configure it to

[chinboys]

The class got some goodies last month and we are wiring it up to use.

4 ton Goodman heat pump at 240 V AC single phase with its own 24 V AC transformer.
4 ton A coil installed above the 2 stage vertical furnace.
Goodman 100K Btu two stage natural gas upright condensing furnace with Ecm blower and it's own 24 V AC transformer.

How to wire a thermostat that uses the heat pump for primary cooling and heating.
And to use the two stage furnace for auxiliary heat.

 

[jlv03]

Model# of each component?

I'm sure thermostat wiring is buried in the installation manuals.

 

[Wiz02]

The class got some goodies last month and we are wiring it up to use.

4 ton Goodman heat pump at 240 V AC single phase with its own 24 V AC transformer.
4 ton A coil installed above the 2 stage vertical furnace.
Goodman 100K Btu two stage natural gas upright condensing furnace with Ecm blower and it's own 24 V AC transformer.

How to wire a thermostat that uses the heat pump for primary cooling and heating.
And to use the two stage furnace for auxiliary heat.

I have this configuration, just not Goodman equipment. I agree with @jlv03, between the equipment installation manual and the tstat manual you should find the wiring information that you need.

 

[lmg]

Make sure your thermostat will handle 2 heat sources. These are not uncommon.

 

[ArcReactorKC]

First step:

Tell us what thermostat you are using.

Probable Second step:

Buy a thermostat with two stage heat capability

 

[fitter30]

There has to be away that when 2 nd stage calls for heat the hp has to shut off. Here a manual for thermostat you will need. Three stages for heat with lockout for hp when gas is called.

https://www.google.com/url?q=https://goodmanthermostats.com/downloads/GT4272_manual.pdf&sa=U&ved=2ahUKEwiKt7e74t2FAxWLrYkEHT0ZDyIQFnoECAsQAg&usg=AOvVaw1NJWGVmYDy9RWkDCY0ZNe1

 

[Wiz02]

Here's my Honeywell tstat manual. You can see the wiring starting on pg 6.

No wifi, which is what I wanted but many hvac system configurations are supported

 

[danski0224]

You need a dual fuel thermostat.

It may also need to be multi stage depending on your equipment.

You also need to know your balance point. This gets programmed into the thermostat.

Thermostat will need outdoor temperature monitoring capability.