To avoid these ads, REGISTER NOW!

Various Snap-On Pliers and Diagonal Cutters (used)

B

bmwpowere36m3

Well-known member
Joined
Nov 8, 2012
Messages
1,125
Location
CT
Price
Varies
Various used Snap-On pliers and diagonal cutters. Most if not all have markings which have been ground off. All items in good to average condition.

Can take more pictures as requested. Will update with additional pliers as time allows. Prices are OBO and shipping is not included. Will bundle multiple items.

196CF $ SOLD 8" Needle Nose Talon Grip
196BCP $ SOLD 7" Needle Nose w/ Cutter
96BCP $ SOLD 7" Needle Nose

388BCP $ SOLD 8" Diagonal Cutter
87BCP $ SOLD 7" Diagonal Cutter
85BCP $ SOLD 5" Diagonal Cutter
184CCP $ SOLD 4" Diagonal Cutter

EP892 $ SOLD 5" Electronics Needle Nose Pliers, 60 degree Angled Non-Serrated Jaws (made in Sweden)









 

Attachments

  • DSC01940.jpg
    DSC01940.jpg
    129.8 KB · Views: 65
Last edited:
To avoid these ads, REGISTER NOW!
OP
B

bmwpowere36m3

Well-known member
Joined
Nov 8, 2012
Messages
1,125
Gossen Metrawatt Kelvin Clip Leads KC4 Z227A

Brand new set of Gossen Metrawatt KC4 Kelvin Clip leads, Z227A for Low Ohm Measurements.

Two sets, Asking $200 OBO + shipping for each.


Milliohm Measurement with Type KC4 Kelvin Clips

Kelvin clips are suitable for establishing contact with low-resistance devices under test. They compensate for influence resulting from cable and contact resistance. The KC4 set includes two clips with insulated, twist-resistant jaws and good clamping action. They can be used for establishing contact with very fine wires, up to rails and rods with a maximum diameter of 15 mm. 4-pole connection is highly advisable for the measurement of values of less than 30 Ω.
 

Attachments

  • s-l1600.jpg
    s-l1600.jpg
    150.7 KB · Views: 25
  • s-l1600a.jpg
    s-l1600a.jpg
    162.5 KB · Views: 23
  • gossen-metrawatt_z227a_.jpg
    gossen-metrawatt_z227a_.jpg
    18 KB · Views: 25
OP
B

bmwpowere36m3

Well-known member
Joined
Nov 8, 2012
Messages
1,125
Various Snap-On Screwdrivers Instinct and Grip

Various used Snap-On (Grip and Soft Instinct). Most if not all have markings which have been ground off. All items in good to average condition. The part # on the handle might not reflect the actual blade, so I listed the type and length.

Can take more pictures as requested. Will update with additional screwdrivers as time allows. Prices are OBO and shipping is not included. Will bundle multiple items.

GRIP
Snap-On SGD4120 $15 Cabinet Flat 1/4" x 12" Blade
Snap-On SGDP122A $15 #2 x 12" Blade
Snap-On ? $ 15 #2 x 9" Blade
Snap-On SGDP101 $ 15 #1 x 10" Blade
Snap-On SGD4 $ 11 Flat 1/4" x 4"
Snap-On SGD2 $11 Flat 3/16" x 3" Blade
Snap-On SGDP31IR $11 #1 x 3" Blade


Instincts SOLD
Snap-On SGD6B $ SOLD Flat 5/16" x 6" Blade
Snap-On SGD146B $ SOLDCabinet Flat 3/16" x 6" Blade
Snap-On SGD480B $ SOLD Cabinet Flat 7/32" x 8" Blade
Snap-On SGDP42IRB $ SOLD #2 x 4" Blade
Snap-On SGDP42IRB $ SOLD #2 x 8" Blade
Snap-On SGDP102B $ SOLD #2 x 9" Blade
Snap-On SGDP63IRB $ SOLD #3 x 6" Blade

I would love to sell each, grip and instinct, as a set for a good price ;)



 

Attachments

  • DSC01897.jpg
    DSC01897.jpg
    135.4 KB · Views: 29
Last edited:
OP
B

bmwpowere36m3

Well-known member
Joined
Nov 8, 2012
Messages
1,125
Various Armstrong Combo Wrenches (used)

Various used Armstrong Full Polish Regular Combination Wrenches. Most if not all have markings which have been ground off. All items in fair condition with a few rust spots.

Can take more pictures as requested. Price is $ 50 OBO and shipping is not included.

25-230 15/16" 12-PT (2x)
25-214 7/16" 12-PT
25-210 5/16" 12-PT (2x)
25-111 11/32" 12-PT Stubby
25-010 5/16" 6-PT Stubby

 

Attachments

  • DSC01903.jpg
    DSC01903.jpg
    136.1 KB · Views: 21
Last edited:
OP
B

bmwpowere36m3

Well-known member
Joined
Nov 8, 2012
Messages
1,125
Various Snap-On Ratchets, Breakers, Ratcheting Drivers, Rat Driver Mag Holders (used)

Various used Snap-On ratchets, breakers, ratcheting drivers and ratcheting driver mag holders.

Most if not all, except were noted, have markings which have been ground off. All items in good condition unless noted.

Can take more pictures as requested. Will update with additional pliers as time allows. Prices are OBO and shipping is not included. Will bundle multiple items.

Snap-On FHBB12 $50 3/8" 12" Breaker, Comfort Handle
Snap-On F10LB $38 3/8" 10" Breaker
Snap-On SSDMRT1 $ SOLD T-Handle Ratcheting Magnetic Stubby Red Screwdriver (no bits)
Snap-On TMRT8 $ SOLD 10" T-Handle Ratcheting Magnetic Long Screwdriver Black (no bits)

Snap-On T936 $ 28 1/4" Ratchet

Snap-On SGDMRC4-80 $ SOLD Shank/Bit Holder, Magnetic, 9"
Snap-On SGDMRC4-40 $ SOLD Shank/Bit Holder, Magnetic, 5"
Snap-On SGDMRC1-10 $ SOLD Shank/Bit Holder, Magnetic, 3"



 

Attachments

  • DSC01907.jpg
    DSC01907.jpg
    136.5 KB · Views: 39
Last edited:
OP
B

bmwpowere36m3

Well-known member
Joined
Nov 8, 2012
Messages
1,125
Snap-On/Williams 1/4" thru 1" 3/8" Drive SAE 12 point Deep Socket Set

Used Snap-On/Williams 3/8" drive, 1/4" thru 1", 12-point deep socket set (214SFY)

All Snap-On sockets, expect 5/8", 3/8" and 1/4" which are Williams. All sockets in great condition, expect for owners marks which have been ground off. Sockets 7/8", 11/16", 7/16" and 19/32" are free from owners marks.

Can take more pictures as requested. Price is 200 OBO, shipped CONUS.

 

Attachments

  • DSC01922.jpg
    DSC01922.jpg
    135.1 KB · Views: 17
Last edited:
OP
B

bmwpowere36m3

Well-known member
Joined
Nov 8, 2012
Messages
1,125
Hellermann Tyton EVO 7 Zip Tie Tension Tool 110-70083

Barely used, excellent shape. Hellermann Tyton EVO 7 Mechanical Hand Tool 110-70083 18-80lb Ties Standard hand span 3.5" (zip tie tension tool/cutter).

More info: http://www.hellermanntyton.us/ProductDetail.aspx?p=110-70083

Price is $190 OBO, shipped CONUS.





 

Attachments

  • DSC01920.jpg
    DSC01920.jpg
    145.6 KB · Views: 14
  • DSC01921.jpg
    DSC01921.jpg
    138.5 KB · Views: 12
  • DSC01919.jpg
    DSC01919.jpg
    146.8 KB · Views: 12
Last edited:
OP
B

bmwpowere36m3

Well-known member
Joined
Nov 8, 2012
Messages
1,125
Re: Various Snap-On Ratchets, Breakers, Ratcheting Drivers, Rat Driver Mag Holders (u

Updated
 
To avoid these ads, REGISTER NOW!
OP
B

bmwpowere36m3

Well-known member
Joined
Nov 8, 2012
Messages
1,125
Another set sold, thanks GJer.

Will deal on remaining set (3 plier, 2 cutter), want gone.
 
OP
B

bmwpowere36m3

Well-known member
Joined
Nov 8, 2012
Messages
1,125
Re: Various Snap-On Screwdrivers Instinct and Grip

Instinct set sold, Grip set remaining.

Will deal on set, want gone.
 
OP
B

bmwpowere36m3

Well-known member
Joined
Nov 8, 2012
Messages
1,125
Re: Various Snap-On Ratchets, Breakers, Ratcheting Drivers, Rat Driver Mag Holders (u

bump
 
OP
B

bmwpowere36m3

Well-known member
Joined
Nov 8, 2012
Messages
1,125
All pliers sold.

Still available, Prices OBO + shipping:

Gossen Metrawatt KC4 Kelvin Clip leads, Z227A for Low Ohm Measurements. $200
Snap-On GRIP Screwdriver Set $ 75
Armstrong misc wrenches $ 50
Snap-On FHBB12 $50 3/8" 12" Breaker, Comfort Handle
Snap-On F10LB $38 3/8" 10" Breaker
Snap-On T936 $ 28 1/4" Ratchet (1 left)
Snap-On/Williams 3/8" drive, 1/4" thru 1", 12-point deep socket set (214SFY) $200
Hellermann Tyton EVO 7 Zip Tie Tension Tool 110-70083 $190
 
You must log in or register to reply here.
To avoid these ads, REGISTER NOW!
Top Bottom