I had put up a post a few months ago requesting info on use of NG, ventless heaters in garages. Some positive responses, some negative responses. I was planning on putting in a vented heater and just living with having to cut a hole in a wall or roof, when a ventless heater fell into my lap, for free. So...I had to try it out.
My garage is a 2.5 car with rough drywall (taped and mudded but not sanded and finished), and pretty good insulation; newer construction (1yo). Ceilings are 10-12', and it is attached. I have a 30,000 BTU NG ventless heater mounted on the front wall of the garage, and to date, it is working pretty darn well. I have it set as low as it will go, which keeps the garage at about 50 degrees (F).
This weekend, it was -5, with 35-45mph winds, and the garage was comfy at 50-55 degrees. If I want to work in there, I can turn it up an hour or so early, and it will get as warm as you'd like. Adding a ceiling fan to circulate the air would definitely keep it more consistent temp wise, and would be a nice addition.
I've never had any air quality issues, and have monitored CO levels closely. Even with my tight garage, it isn't an issue (to date).
The other big complaint about ventless was the release of moisture into the air. It certainly does do that; my garage door is insulated, but still gets a bit of frost on the inside. I also have 1 double hung window in the garage that gets a frosting on it (on the wall opposite the heater). But there's no moisture on the walls, or on the tools, or etc. I do imagine that if I left the heat OFF and then turned it on and cranked it up, I'd have condensation on tools, as they warmed up. But with it on low all of the time, no issues. Also, the effect on my gas bill has been negligible...I just need to be vigilant about keeping the door shut.
My unit is not an 'infrared' unit; I can't say how well they work. But for my purposes, this works quite well. My old garage had a large forced air NG heater (from a mobile trailer) that could warm it up in minutes from any temperature to balmy. This doesn't have that capability. But it keeps the cars from freezing up, keeps my beer fridge from freezing, and keeps the garage a nice place to work, change, etc.
One funny thing is that I've noticed it really keeps the slab warm. I'm not sure if it is because the garage is attached, or why (or if it is in my head)...in my old, detached garage, I'd leave the heat off (unless I was anticipating a snow or was on call), and then turn it on when I needed to work in there. The air would warm up, but the floor was always FREEZING. In the new garage, the floor is surprisingly warm and comfy (it's around the air temperature...55 degrees or so).
Ultimately, I'd like to have a vented unit so I could have a bit more flexibility in where I set the temps (and to satiate my inner firefighter not liking the non-vented setup I currently have)...but for now, my heater is working well and I'm pleased with it. It certainly beats electric heat, and it beats kerosene space heaters or torpedo heaters for utility. Just wanted to do a follow-up post on the subject and give my thoughts.
My garage is a 2.5 car with rough drywall (taped and mudded but not sanded and finished), and pretty good insulation; newer construction (1yo). Ceilings are 10-12', and it is attached. I have a 30,000 BTU NG ventless heater mounted on the front wall of the garage, and to date, it is working pretty darn well. I have it set as low as it will go, which keeps the garage at about 50 degrees (F).
This weekend, it was -5, with 35-45mph winds, and the garage was comfy at 50-55 degrees. If I want to work in there, I can turn it up an hour or so early, and it will get as warm as you'd like. Adding a ceiling fan to circulate the air would definitely keep it more consistent temp wise, and would be a nice addition.
I've never had any air quality issues, and have monitored CO levels closely. Even with my tight garage, it isn't an issue (to date).
The other big complaint about ventless was the release of moisture into the air. It certainly does do that; my garage door is insulated, but still gets a bit of frost on the inside. I also have 1 double hung window in the garage that gets a frosting on it (on the wall opposite the heater). But there's no moisture on the walls, or on the tools, or etc. I do imagine that if I left the heat OFF and then turned it on and cranked it up, I'd have condensation on tools, as they warmed up. But with it on low all of the time, no issues. Also, the effect on my gas bill has been negligible...I just need to be vigilant about keeping the door shut.
My unit is not an 'infrared' unit; I can't say how well they work. But for my purposes, this works quite well. My old garage had a large forced air NG heater (from a mobile trailer) that could warm it up in minutes from any temperature to balmy. This doesn't have that capability. But it keeps the cars from freezing up, keeps my beer fridge from freezing, and keeps the garage a nice place to work, change, etc.
One funny thing is that I've noticed it really keeps the slab warm. I'm not sure if it is because the garage is attached, or why (or if it is in my head)...in my old, detached garage, I'd leave the heat off (unless I was anticipating a snow or was on call), and then turn it on when I needed to work in there. The air would warm up, but the floor was always FREEZING. In the new garage, the floor is surprisingly warm and comfy (it's around the air temperature...55 degrees or so).
Ultimately, I'd like to have a vented unit so I could have a bit more flexibility in where I set the temps (and to satiate my inner firefighter not liking the non-vented setup I currently have)...but for now, my heater is working well and I'm pleased with it. It certainly beats electric heat, and it beats kerosene space heaters or torpedo heaters for utility. Just wanted to do a follow-up post on the subject and give my thoughts.
