To avoid these ads, REGISTER NOW!

Vintage Ephemera

To avoid these ads, REGISTER NOW!
OP
K

kyrbz

Well-known member
Joined
Jan 30, 2012
Messages
1,303
Location
midwest US
1945 Flying Wright Cyclone 18 ad pp.jpg
1945 Flying Wright Cyclone 18 ad
1945 Flying Wright cautaway ad pp.jpg
1945 Flying Wright cutaway ad

My wife and I used to live in a loft that overlooked the old downtown "Municipal Airport" which now houses an aviation museum. Maybe the pride of their collection is a completely original TWA Connie. I always enjoyed seeing it take off or landing. Very distinctive sound that I instantly recognize if it's in the air.

con1.JPG

kc3.jpg

con3.JPG con2.JPG con4.JPG con5.JPG con6.JPG con7.JPG
 
Last edited:

Ricky Joe

Well-known member
Joined
Sep 15, 2013
Messages
2,452
Location
Roanoke, Va.
People might laugh at the 30 day lubrication interval, not me. My wife has run paper routes since 1989, and needs a full LOF every 25 days. One Toyota, two Fords, one Pontiac, three Subarus, one Kia, three Nissans, one Cadillac, and two Hondas later, she has a well earned retirement coming on 3/31/24, and I have enough data points that I will never, ever, ever buy another American-made vehicle.

Found this today, 20 pages of tips. WTF is an “electric torch”??


IMG_2322.jpegIMG_2323.jpegIMG_2325.jpeg
Electric torch, or carbon arc. This one is from the 1960s, I’ll guessing.
 

Attachments

  • image.jpg
    image.jpg
    1.1 MB · Views: 23

PSCo1867

Well-known member
Joined
Nov 11, 2020
Messages
306
Location
PA
Vintage Bethlehem Steel calendar page and safety posters. The posters are early/mid century I believe. How times have changed. No or little eye protection required back then. Check out the loose fitting sleeves & jacket on the lathe operator!BSCoDec1917.jpegBSCoSafety1.jpeg
 

Jagmandave

Well-known member
Joined
Nov 6, 2011
Messages
6,299
Location
Overland Park, Ks.
My wife and I used to live in a loft that overlooked the old downtown "Municipal Airport" which now houses an aviation museum. Maybe the pride of their collection is a completely original TWA Connie. I always enjoyed seeing it take off or landing. Very distinctive sound that I instantly recognize if it's in the air.

con1.JPG

kc3.jpg

con3.JPG con2.JPG con4.JPG con5.JPG con6.JPG con7.JPG
First plane I ever flew in was a Connie, from this airport......when I was growing up we would go down to the airport on Sundays after church for lunch, the restaurant was on the upper floor and you could walk out onto a patio on the roof and watch the planes take off and land.

The runway is fairly short (compared to modern airports) and at the runways end the pilot locked the brakes, brought the engines up to full power and turned it loose.....on liftoff he had to climb out pretty steep to clear the buildings that were right across the river and up hill from the runway.

The first jets taking off out of there found it even scarier as they couldn't build up enough speed till the absolute end of the runway......it was exciting!
 

RTM

Well-known member
Joined
May 13, 2019
Messages
13,079
Location
SF Bay Area
The runway is fairly short (compared to modern airports) and at the runways end the pilot locked the brakes, brought the engines up to full power and turned it loose.....on liftoff he had to climb out pretty steep to clear the buildings that were right across the river and up hill from the runway.

The first jets taking off out of there found it even scarier as they couldn't build up enough speed till the absolute end of the runway......it was exciting!
Sounds like John Wayne airport in Orange County, CA, special takeoff plan in the evening/ night to avoid annoying the neighbors underneath. Really a thrill ride some days, they stand on it while on the brakes (power braking when I was a teenager), pop the brakes, then at some elevation, level off and throttle back to nothing.

Edited for clarity
 
Last edited:

Jagmandave

Well-known member
Joined
Nov 6, 2011
Messages
6,299
Location
Overland Park, Ks.
Oh, right.....Long Beach and several others do that stuff too. My brother had an old twin engine Cessna 310 and he really had to be careful about that while building his hours.
 

Farmer J.

Well-known member
Joined
Sep 18, 2016
Messages
1,995
Location
UK, Cornwall/Hertfordshire.
Early 1900's sheep dip advert.

DipR.jpg
On the floor by the doorway of the shop in that illustration there's a wooden box with 'Coopers Dipping Powder' written on it. The boxes like that contained 2 metal tins of powder..
Only a couple of years ago I discovered one at the back of a shed, it was very rotten and so contaminated by poisonous organophosphate powder that i sent it for correct disposal, rather than keeping it hanging it up as memorabilia!
 
To avoid these ads, REGISTER NOW!

Private Lugnutz

Well-known member
Joined
Mar 30, 2012
Messages
30,476
Location
The Authentic Jersey Shore
Found this classic piece of true ephemera tucked inside an antiquarian book at the flea this morning, probably being used as a bookmarker. I am not sure what "disposed of" means, but I am speculating that this is some sort of fund-raising auction ticket. Thoughts welcome.

20240308_160834.jpg
 
OP
K

kyrbz

Well-known member
Joined
Jan 30, 2012
Messages
1,303
Location
midwest US
Did anyone else notice in the above blurb, that this Nissan had "All Standard SAE fittings - no special tools needed" listed as one of the savings?

T~

The reason early Datsun trucks are SAE is because they licensed the engine from BMC (British Motor Corporation). The Datsun engine is an exact clone of the Austin series B engine. When I first bought my 1964 Datsun 320 I was surprised it was SAE. I incorrectly assumed it would be metric. The early Datsun 320 trucks are also sometimes referred to as Datsun 1200's. I've also read that Datsun/Nissan used to be the licensed manufacturer of Austin's in Japan before they started making their own vehicles which may be another reason early Datsun's are SAE.

trucks2.jpeg

Scan 2.jpeg
 
Last edited:

Private Lugnutz

Well-known member
Joined
Mar 30, 2012
Messages
30,476
Location
The Authentic Jersey Shore
We’re doing some remodeling and found this postcard...
Great actual example!

For the second time in two weeks, I found something ephemeral and automotive garage related inside a book at the flea market, being used as a bookmarker.

This king of clubs playing card...

20240317_075209.jpg

...has some interesting advertising on the back...

20240317_075217.jpg

Bowser invented the first gasoline station pump!

"The self-contained unit included a wooden storage barrel, marble valves, a wooden plunger, a hand lever and an upright faucet lever. It was a success. Bowser formed the S.F. Bowser Company and patented his pump in 1887. The Bowser pump soon became known as a "filling station," and Bowser started selling an improved model to the first automobile-repair garages in 1893."
- excerpted from this outstanding WIRED article, entitled "Sept. 5, 1885: Pay at the Pump"

This Fort Wayne, Indiana history site has a great photo of an early pump in a wooden cabinet.

All the names around the Bowser logo were other companies, divisions, or trademarks owned by S.F. Bowser, Inc. and/or its later incarnations, almost all of them fuel or automotive related. PARCOA, short for Parking Corporation of America, might be the most interesting. They made all the early automatic parking lot gates.
 
Last edited:

Mike'smeatshop

Well-known member
Joined
Apr 1, 2023
Messages
1,273
And now the real ad.

1711210529308.png
I guess it doesn't surprise me. People are doing a lot more tragic things to draw attention to themselves. I am sure they are getting a lot of attention. The one blogger even records how many people have to verify like I have done.
 

Farmer J.

Well-known member
Joined
Sep 18, 2016
Messages
1,995
Location
UK, Cornwall/Hertfordshire.
Many a word spoken in jest is true they say..
My Father used to keep pigs on the farm and supply a company called Walls. They made sausages, bacon, pies all sorts of pork products and also ice cream. In the summertime they always wanted those hogs really fat, and paid a bonus to the farmer for 'Walls Heavy Hogs'...

walls.jpgs-l1600.jpg
 
To avoid these ads, REGISTER NOW!
Top Bottom