Vintage Wrenches for your consideration!

[eddyyy302]

I have a few vintage wrenches that I will be listing tonight, they are all used, most are from the 30's and 40's and info can be found at alloy artifacts on all that I have checked.

These are obviously older wrenches, please ask if you have a question about condition that I have not addressed.

1. Indestro 0729 5/8 & 3/4 open end wrench, very nice patina, and nice wrench for its age. Wrench was cleaned and oiled, not polished. $3 plus shipping.

 

[eddyyy302]

2.
Indestro C-723-A 3/8 & 1/2 open end wrench, marked Chicago U.S.A. Has some wear on both open ends and seems to have black paint on it, I believe possibly from an early finish. $3 plus shipping.

 

[eddyyy302]

3.
Williams # 704 3/4" engineers wrench, marked with a "t" on the reverse side. This wrench has been cleaned, oiled and polished as it was in my little collection for a while. It has some wear on the open end and some scratches on the open end from use, but is a very nice wrench otherwise. $5 plus shipping.

 

[eddyyy302]

4.
Williams # 731 3/4 & 13/16 open end wrench, This wrench has wear on both open ends and was well used, it has strange pitting on the 3/4 side of the wrench, appears to have been rust at some point, or the way it was forged. $3 plus shipping.

 

[eddyyy302]

5.
Fairmount USA, 5/8 & 11/16 open end wrench. No other markings, wrench is in very good shape and has a really cool patina to it that isn't represented well in the pics. $3 plus shipping

 

[eddyyy302]

6.
Bonney ZENEL 3721 5/16 & 3/8 open end wrench. Has 2 grooves for identification on the 5/16 edge otherwise in nice shape, cool story about these wrenches on alloy artifacts if you haven't heard about them. $3 plus shipping.

 

[eddyyy302]

7.
Vlchek WBE18 9/16 combo wrench. Wrench has 2 light grooves for identification, otherwise a nice wrench, with a nice patina to it, story about the gray finish on alloy artifacts. $3 plus shipping.

 

[eddyyy302]

8.
Bllings & Spencer Co. 1113 726 5/16cap 5/16 sae & 7/16 cap 7/16 sae open end wrench. Some wear on open ends otherwise a nice wrench for its age. $3 plus shipping.

 

[eddyyy302]

9.
Blackhawk-Armstrong 1033-C 15/16 & 1" open end wrench. Wrench is used, with some wear on open ends and some scrapes from use. As far as I remember this wrench hasn't been cleaned at all, so would clean up nicely, or use it! $8 plus shipping.

 

[eddyyy302]

Thats it for tonight, some of the wrenches look rusty in the pics, I assure you they are not. If you have any questions feel free to pm me.