Vise mounted Panbrake- Folder

[Mikara39]

Hi needed to fold some aluminium no folder so I made one out of some scrap
below is list
1 x 50mm x 50mm x 6mm Angle iron 250mm long
1 x 30mm x 30mm x 5mm Angle iron 250mm long
1 x 25mm x 12mm thin Wall tubing 370mm long
2 x 40mm x 6mm flat bar
2 x 6mm pins
2 x 16mm round bar
2 x 8mm bolts and nuts

1000mm of 30mm x 30mm x5mm Angle iron
500mm of 16mm round bar
2 x 8mm allen headed bolts 50mm long

 

[larry4406]

Nice!

Welcome and hell of a great first post!

 

[Mikara39]

Hi Larry
Thanks here some photos in use

 

[matt_i]

Nice job! What is the part that you are making? And what thickness of alu?

 

[Mikara39]

Hi Matt
1.5mm alum
Nose box Formula Ford Race Car

 

[racingtadpole]

Hi Matt
1.5mm alum
Nose box Formula Ford Race Car

You cant dangle the carrot of things single seat and open-wheel and then not provide pictures...



Or better yet, if you have it in bits, start a thread..

 

[lilredex]

Welcome! Great idea on the minimal clamping leaf. It will make a needed addition to my "Gingery style" brake.

The two pictures I saved...

 

[Mikara39]

Hi
Finally finished Nosebox and here after some before and after photos.