To avoid these ads, REGISTER NOW!

Vise Pipe Jaw Identification

Provincial

Well-known member
Joined
Sep 21, 2011
Messages
6,874
Location
Near Salem, OR
I found this set of removable pipe jaws in a shed on my wife's family property. They appear to be from an open screw bench vise. The only identification on them is the number 5 and a c in a circle. Based on the dimensions, the screw would have been 3/4" diameter and the beam below it would have been up to 13/16" wide. Dimensions are:
Height (overall) 2.75
Width (overall) 1.85
Slot width (at screw) .75
Slot width (at beam) .85
Slot height (at beam) .35
Slot height (above beam) 1.125
Pipe Jaw 1.jpg
Pipe Jaw 2.jpg
 
To avoid these ads, REGISTER NOW!
To avoid these ads, REGISTER NOW!
To avoid these ads, REGISTER NOW!
Top Bottom