Greetings to all,
I began last year with my garage project to house my Porsche 911sc/RUF inspired project car. I will post pictures later but for now, I will provide a short description of the work done so far;
1. Two car garage standard size to include one full door, and approximately 400 sf of parking space.
2. Floring- painted gray with particles and sealed with a shinny sealer.
2. Primed and painted the garage in white to show the brighness and make it look bigger than what it is.
3. Overhead shop lights all over the ceiling from Home Depot.
4. Back door painted gloss black
5. Installed two industrial racks purschased at COSTO. They are black in color and one of them was turned into a workbench.
6. Purschased an OAK table top at IKEA for 99.00 in their liquidation area. Cut it to fit the workbench and withe the left over piece approximatelly 18 inches wide, used it for a lateral workbench (used two rubber made storage wall unit 36 inches high and turned them into a work bench)
7. Storage on one side two large rubber made armoire) + two smaller ones for an in between workbench and storage.
8. NEEDED WATER SO I WENT AHEAD AND PURCHASED A HEAVY DUTY HOT AND COND HOSE AT LOWES (RED IN COLOR), PLUGED A HOLE THROUGH THE WALL AND INTO THE LAUNDRY, PLACED A Y ISOLATION CONNECTOR AND CONNECTED THE HOSE AND THE WASHER. PLACED SEALANT AROUND THE HOLE AND THE HOSE TO AVOID RODENTS TO GET INTO THE HOUSE. USED CLAMPS TO SECURE THE HOSE TO THE WALL AND INSTALLED A HOSE REEEL ON THE WALL. MIDDLE OF THE WINTER, AND I HAVE A HOSE WITH COLD WATER TO CLEAN UP THE CARS AND GET SOME OF THE DIRT OUT OF THE GARAGE. PICTURES FORTHCOMMING. THANKS G
I began last year with my garage project to house my Porsche 911sc/RUF inspired project car. I will post pictures later but for now, I will provide a short description of the work done so far;
1. Two car garage standard size to include one full door, and approximately 400 sf of parking space.
2. Floring- painted gray with particles and sealed with a shinny sealer.
2. Primed and painted the garage in white to show the brighness and make it look bigger than what it is.
3. Overhead shop lights all over the ceiling from Home Depot.
4. Back door painted gloss black
5. Installed two industrial racks purschased at COSTO. They are black in color and one of them was turned into a workbench.
6. Purschased an OAK table top at IKEA for 99.00 in their liquidation area. Cut it to fit the workbench and withe the left over piece approximatelly 18 inches wide, used it for a lateral workbench (used two rubber made storage wall unit 36 inches high and turned them into a work bench)
7. Storage on one side two large rubber made armoire) + two smaller ones for an in between workbench and storage.
8. NEEDED WATER SO I WENT AHEAD AND PURCHASED A HEAVY DUTY HOT AND COND HOSE AT LOWES (RED IN COLOR), PLUGED A HOLE THROUGH THE WALL AND INTO THE LAUNDRY, PLACED A Y ISOLATION CONNECTOR AND CONNECTED THE HOSE AND THE WASHER. PLACED SEALANT AROUND THE HOLE AND THE HOSE TO AVOID RODENTS TO GET INTO THE HOUSE. USED CLAMPS TO SECURE THE HOSE TO THE WALL AND INSTALLED A HOSE REEEL ON THE WALL. MIDDLE OF THE WINTER, AND I HAVE A HOSE WITH COLD WATER TO CLEAN UP THE CARS AND GET SOME OF THE DIRT OUT OF THE GARAGE. PICTURES FORTHCOMMING. THANKS G