Waterborne Epoxy Primer + 100% solids epoxy Primer

[Td_20]

To make a Long story short, I end up with a double order of Epoxy Primmer.
One is a waterborne epoxy prime and the other 100% solids, both from different companies. (said to compatible with base coat).
One was shipped by mistake and is free keep, do to the high cost ship it back.
The base coat is 100% solid epoxy and the top coat is urethane.

Question: Can I put down the waterborne epoxy primmer and then recoat with the 100% solid primmer and then the base coat & top coat?


Thanks for the help!

 

[LegacyIndustrial]

If you are using 100 solids primer, pull it tight with a squeegee. This helps to thwart surface anomalies and will get you more coverage per gallon. If you use our primer just roll out.