venturesomerite
Well-known member
- Location
- Hamden CT
- Price
- 250 obo
for sale is a old Wayne 2 stage (I think) compressor and motor, with tank plate. Off a compressor that had a bad tank. what you see is what you get (no, not the cart). I have the hardware to bolt the motor and compressor to the plate as well. just bolt these to your tank, or if you are making your own, weld on the plate. Also good for converting a new cheaper unit like Harbor Freight.
I bought it as a complete compressor unit. The tank leaked, but it turned out the tank was not savable. I could not in good conscience sell it whole, as someone might try and use it, so I scrapped the tank. I believe the tank was an 80 gal.
I have never run it as a compressor, but compressor and motor turn freely. You can hear the compressor moving air when spinning. EDIT: Pulley on motor is loose. One of the set screws is not all the way tightened, If I have a chance, I will put some oil on it and snug it down. Shaft looks straight on it.
I would prefer local pick up, but I will work with you on shipping. I don't know the exact weight, but I'd guess it's gotta be around 200 or so. Located in 06518 if you want to find quotes. Buyer pays shipping. I'll put it on a pallet for you, and bolt it to it.
Located in Hamden CT
Open to trades , worst I can say is no. Would be looking mostly for mechanic related tools, but you never know. (edit, found a hardwood nailer, thanks for the offers)
two zero three two one eight eight seven six six
Pictures below
edit. got deleted, I'll update later, in the mean time pm with email for pics)
I bought it as a complete compressor unit. The tank leaked, but it turned out the tank was not savable. I could not in good conscience sell it whole, as someone might try and use it, so I scrapped the tank. I believe the tank was an 80 gal.
I have never run it as a compressor, but compressor and motor turn freely. You can hear the compressor moving air when spinning. EDIT: Pulley on motor is loose. One of the set screws is not all the way tightened, If I have a chance, I will put some oil on it and snug it down. Shaft looks straight on it.
I would prefer local pick up, but I will work with you on shipping. I don't know the exact weight, but I'd guess it's gotta be around 200 or so. Located in 06518 if you want to find quotes. Buyer pays shipping. I'll put it on a pallet for you, and bolt it to it.
Located in Hamden CT
Open to trades , worst I can say is no. Would be looking mostly for mechanic related tools, but you never know. (edit, found a hardwood nailer, thanks for the offers)
two zero three two one eight eight seven six six
Pictures below
edit. got deleted, I'll update later, in the mean time pm with email for pics)
Last edited: