toadjammer
Well-known member
Dropping prices by $50 each trying to get things moving. If you think my prices are too high make an offer you won't insult me, but I probably won't respond to rediculous offers.
Airco dip-pak 200 Mig welder, a little rough on the outside, but is a working/tested machine in need of a gun. Has a stitch and spot panel installed. $125
Both of these Dip-stick 160 have the capability to stick weld AC/DC, Tig weld DC/AC with add on HF box. I don't have enough plugs or cables and tig torches for both of the machines but will include at least 1 connector with each machine and they should be fairly easy to make. I also have a Century HF add on box and a torch I will sell for $100 with one of these welders. And the spool gun simple turns on and off with a switch in a panel that gets mounted on the front of the machine and has its own air hose and selenoid so a hose will have to be hooked up at the regulator. So you can run the spool gun and the mig gun interchangeably with a flip of the switch and switching gas connectors (you would probably run a Y off of the regulator)
Airco Dip-stick 160 Mig/Stick/Tig works well and I have used for at least 2 years will come with a stitch and spot panel, and comes with a brand new gun(less than 1 LB. run through). $550
Airco Dip-stick 160 Mig/StickTig works well and I have used this machine it has a newer style gun and comes with a stitch/spot panel. $325
Airco spool gun for direct hook-up in place of the spot/stitch panel. I know it works with both of the dip-stick machines and possiblly works with the dip pack. It will arc and the motor speed/ feed works fine, I just haven't purchased contact tips to make sure it functions perfectly. $350
Miller DIALARC HF Tig/stick dc/ac high frequency This machine works very well. $950
Please Pm me with any interest. I would be willing to help out with shipping/delivery throughout WI, IL, IN, and ON within reason fitting my upcoming schedule.
Thanks
Toadjammer
Airco dip-pak 200 Mig welder, a little rough on the outside, but is a working/tested machine in need of a gun. Has a stitch and spot panel installed. $125
Both of these Dip-stick 160 have the capability to stick weld AC/DC, Tig weld DC/AC with add on HF box. I don't have enough plugs or cables and tig torches for both of the machines but will include at least 1 connector with each machine and they should be fairly easy to make. I also have a Century HF add on box and a torch I will sell for $100 with one of these welders. And the spool gun simple turns on and off with a switch in a panel that gets mounted on the front of the machine and has its own air hose and selenoid so a hose will have to be hooked up at the regulator. So you can run the spool gun and the mig gun interchangeably with a flip of the switch and switching gas connectors (you would probably run a Y off of the regulator)
Airco Dip-stick 160 Mig/Stick/Tig works well and I have used for at least 2 years will come with a stitch and spot panel, and comes with a brand new gun(less than 1 LB. run through). $550
Airco Dip-stick 160 Mig/StickTig works well and I have used this machine it has a newer style gun and comes with a stitch/spot panel. $325
Airco spool gun for direct hook-up in place of the spot/stitch panel. I know it works with both of the dip-stick machines and possiblly works with the dip pack. It will arc and the motor speed/ feed works fine, I just haven't purchased contact tips to make sure it functions perfectly. $350
Miller DIALARC HF Tig/stick dc/ac high frequency This machine works very well. $950
Please Pm me with any interest. I would be willing to help out with shipping/delivery throughout WI, IL, IN, and ON within reason fitting my upcoming schedule.
Thanks
Toadjammer
Last edited: