Welding jacket for tall guys

[Deadsquiggles]

So I now have two welding jackets. One Hobart and one showed up today that I ordered. It’s a Revco 2XL BSX Flame-Resistant Welding Jacket, BXRB9C. Once again the problem I run into is that at 6’2” and 260 pounds, the 2XL is the right size as far as chest measurements go, but the sleeves and body of the jacket are too short. Anybody have any recommendations for jackets that run long or jackets that come in a big and tall size?

 

[Flash and Flare]

I had the same issue with the cheap Radnor jackets that Airgas sells, my Lincoln Rep got me a jacket and it's perfect.
It's just the plain black cotton welding jacket with the Lincoln Electric logo on it.

https://www.ebay.com/itm/Lincoln-El...-/224286246458?_trksid=p2349624.m46890.l49292

That's the exact one I have.



Edited autonomously and arbitrarily sent from my Google machine.

 

[Deadsquiggles]

I had the same issue with the cheap Radnor jackets that Airgas sells, my Lincoln Rep got me a jacket and it's perfect.
It's just the plain black cotton welding jacket with the Lincoln Electric logo on it.

https://www.ebay.com/itm/Lincoln-El...-/224286246458?_trksid=p2349624.m46890.l49292

That's the exact one I have.



Edited autonomously and arbitrarily sent from my Google machine.

Were the sleeves longer as well?

 

[Flash and Flare]

Were the sleeves longer as well?

Yes

Sent from my Pixel 4 using Tapatalk

 

[Deadsquiggles]

Guess I’ll try picking one up tomorrow

 

[oldwino]

Timely post. I have the same issues with Radnor jackets. Will definitely try the Lincoln