yatg
Well-known member
- Location
- Oregon
Inventory from a business acquisition several years ago.
Never used them, but they've been kind of cleaned up and tested and they melt solder.
#1 Weller TC202 power supply with TC201 iron
Iron says "24V, 2A"
Its supposed to be a 42W iron.
No temperature control, but temperature is roughly
controlled by the tips. For example, a PTC8 tip
is 800*F.
A few extra tips included.
Tips available on Amazon, search for "weller tc201 tips"
Could use a better cleaning outside and don't know about the inside.
Power cord entrance on rear is damaged and cord has no retainer.
Missing stick-on feet.
$20 + $15 shipping (USPS medium flat rate box)
-----
#2 Weller EC2000 power supply with EC1201A iron
Temperature controlled power supply.
Set/Read switch.
Range is aprox 350*f to 800*f
When first turned on it takes a minute before it stabilizes.
Set it to 600 and it hunts plus/minus 10 degrees at idle.
Iron says "24V, 42W"
Tips available on Amazon, search for "weller ec1201 tips"
Could use a better cleaning outside and don't know about the inside.
The control knob feels tight and could use some contact cleaner.
Missing two stick-on feet.
$30 + $15 shipping (USPS medium flat rate box)
Never used them, but they've been kind of cleaned up and tested and they melt solder.
#1 Weller TC202 power supply with TC201 iron
Iron says "24V, 2A"
Its supposed to be a 42W iron.
No temperature control, but temperature is roughly
controlled by the tips. For example, a PTC8 tip
is 800*F.
A few extra tips included.
Tips available on Amazon, search for "weller tc201 tips"
Could use a better cleaning outside and don't know about the inside.
Power cord entrance on rear is damaged and cord has no retainer.
Missing stick-on feet.
$20 + $15 shipping (USPS medium flat rate box)
-----
#2 Weller EC2000 power supply with EC1201A iron
Temperature controlled power supply.
Set/Read switch.
Range is aprox 350*f to 800*f
When first turned on it takes a minute before it stabilizes.
Set it to 600 and it hunts plus/minus 10 degrees at idle.
Iron says "24V, 42W"
Tips available on Amazon, search for "weller ec1201 tips"
Could use a better cleaning outside and don't know about the inside.
The control knob feels tight and could use some contact cleaner.
Missing two stick-on feet.
$30 + $15 shipping (USPS medium flat rate box)
